Search NASA⌕ Search

Engineering topics

Hemley, R J

Publications and source records attributed to Hemley, R J.

Large volume high-pressure cell with supported moissanite anvils

The recently developed moissanite anvil cell (MAC) has become a useful device for achieving both high-pressure and large sample volume in an anvil cell. We describe two improvements in the basic design of the MAC. First, the loading environment has been optimized by centering the load. Second, a variety of supported systems have been examined to provide anvil stability at high loads with large anvils. Sample volumes that are nearly three orders magnitude greater than allowed by conventional diamond anvil cells can be pressurized and characterized at {approx}50 GPa.

47 OTHER INSTRUMENTATION↗

New findings in static high-pressure science

Recent static high P-T experiments using diamond anvil cell techniques reveal an array of phenomena and provide new links to dynamic compression experiments. Selected recent developments are reviewed, including new findings in hot dense hydrogen, the creation of new metals and superconductors, new transitions in molecular and other low-Z systems, the behavior of iron and transition metals, chemical changes of importance in geoscience and planetary science, and the creation of new classes of high-pressure devices based on CVD diamond. These advances have set the stage for the next set of developments in this rapidly growing area.

08 HYDROGEN↗

Electronic Structure of Crystalline [superscript 4]He at High Pressures

Using inelastic x-ray scattering techniques, we have succeeded in probing the high-pressure electronic structure of helium at 300 K. Helium has the widest known valence-conduction band gap of all materials a property whose high-pressure response has been inaccessible to direct measurements. We observed a rich electron excitation spectrum, including a cutoff edge above 23 eV, a sharp exciton peak showing linear volume dependence, and a series of excitations and continuum at 26 to 45 eV. We determined the electronic dispersion along the {Gamma}-M direction over two Brillouin zones, and provided a quantitative picture of the helium exciton beyond the simplified Wannier-Frenkel description.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Melting behavior of H[subscript 2]O at high pressures and temperatures

Water plays an important role in the physics and chemistry of planetary interiors. In situ high pressure-temperature Raman spectroscopy and synchrotron x-ray diffraction have been used to examine the phase diagram of H{sub 2}O. A discontinuous change in the melting curve of H{sub 2}O is observed at approximately 35 GPa and 1040 K, indicating a triple point on the melting line. The melting curve of H{sub 2}O increases significantly above the triple point and may intersect the isentropes of Neptune and Uranus. Solid ice could therefore form in stratified layers at depth within these icy planets. The extrapolated melting curve may also intersect with the geotherm of Earth's lower mantle above 60 GPa. The presence of solid H{sub 2}O would result in a jump in the viscosity of the mid-lower mantle and provides an additional explanation for the observed higher viscosity of the mid-lower mantle.

43 PARTICLE ACCELERATORS↗

Single-crystal synchrotron X-ray diffraction study of wustite and magnesiowustite at lower-mantle pressures

This study demonstrates the use of monochromatic synchrotron X-ray radiation of 40 keV for high-precision equation-of-state studies on sets of single crystals analysed individually in the same diamond-anvil pressure cell. Angle-dispersive zone-axis diffraction patterns were obtained from crystals of wuestite-Fe{sub 0.93}O and magnesiowuestite-(Mg{sub 0.73}Fe{sub 0.27})O to 51 GPa in a hydrostatic helium pressure medium. The rhombohedral phase of Fe{sub 0.93}O was observed above 23 GPa, and its isothermal bulk modulus (K{sub 0}) was determined to be 134 ({+-}4) GPa, assuming K' = 4. The rhombohedral phase of Fe{sub 0.93}O is more compressible than B1-structured Fe{sub 0.93}O, with K{sub 0} = 146 ({+-}2) GPa. Magnesiowuestite-(Mg{sub 0.73}Fe{sub 0.27})O remains cubic over the experimental pressure range, and has a bulk modulus of 154 ({+-}3) GPa with K' = 4.0 ({+-}0.1).

43 PARTICLE ACCELERATORS↗

X-ray emission spectroscopy with a laser-heated diamond anvil cell: a new experimental probe of the spin state of iron in the Earth's interior

Synchrotron-based X-ray emission spectroscopy (XES) is well suited to probing the local electronic structure of 3d transition metals such as Fe and Mn in their host phases. The laser-heated diamond anvil cell technique is uniquely capable of generating ultra-high static pressures and temperatures in excess of 100 GPa and 3000 K. Here X-ray emission spectroscopy and X-ray diffraction have been interfaced with the laser-heated diamond cell for studying the electronic spin states of iron in magnesiowuestite-(Mg{sub 0.75},Fe{sub 0.25})O and its crystal structure under lower-mantle conditions. X-ray emission spectra of the ferrous iron in a single crystal of magnesiowuestite-(Mg{sub 0.75},Fe{sub 0.25})O indicate that a high-spin to low-spin transition of ferrous iron occurs at 54 to 67 GPa and 300 K and the ferrous iron remains in the high-spin state up to 47 GPa and 1300 K. This pilot study points to the unique capability of the synchrotron-based XES and X-ray diffraction techniques for addressing the issue of electronic spin transition or crossover in 3d transition metals and compounds under extreme high-P-T conditions.

36 MATERIALS SCIENCE↗

Effect of H2O on Upper Phase Transitions in MgSiO3: Is the Depth of the Seismic X-Discontinuity an Indicator of Mangle Water Content?

The mantle X-discontinuity, usually assigned to positive seismic velocity reflectors in the 260-330 km depth range, has proved difficult to explain in terms of a single mineralogical phase transformation in part because of its depth variability. The coesite to stishovite transition of SiO{sub 2} matches deeper X-discontinuity depths but requires 5-10% free silica in the mantle to match observed impedance contrast. The orthoenstatite (OEn) to high-pressure clinoenstatite (HPCen) transformation of MgSiO{sub 3} also broadly coincides with depths of the X but requires chemically depleted and orthoenstatite-rich lithology at 300 km depth in order to match observed seismic impedance contrast. On the basis of high-pressure infrared spectroscopy, X-ray diffraction, and Raman spectroscopy, we show that 1300 ppm variation of H{sub 2}O content in MgSiO{sub 3} can displace the transition of low-pressure clinoenstatite (LPCen) to HPCen by up to 2 GPa, similar to previous quench experiments on the OEn to HPCen phase transition, where about 30-45 km (1.0-1.5 GPa) of deflection could occur per 0.1 wt% H{sub 2}O. If the mantle X-discontinuity results from pyroxene transitions in a depleted harzburgite layer, because of the strong influence of minor amounts of water on the transformation boundary, the depth of the mantle X-discontinuity could serve as a potentially sensitive indicator of water content in the upper mantle.

58 GEOSCIENCES↗

New structure and spin state of iron-rich (Mg,Fe)SiO[subscript 3] post-perovskite

There was a discrepancy between the seismic tomography and the elastic property of MgSiO{sub 3} perovskite at near the D{double_prime} zone and core boundary. Since a discovery of post-perovskite (ppv) of MgSiO{sub 3}, many investigations have made to explain the presence of low seismic velocity of the lower mantle and D{double_prime} zone. However, precise experimental structure analysis of ppv-(Mg{sub 1-x}Fe{sub x})SiO{sub 3} has never been reported because of the experimental difficulty. Fe and Mg cation distribution and ordering in ppv-(Mg,Fe)SiO{sub 3} in consideration of spins states are significant subject in lower mantle electronic and magnetic states. The present experiment aims X-ray emission study and structure analysis by Rietveld profile fitting of ppv-(Mg{sub 0.6},Fe{sub 0.4})SiO{sub 3} by the precise powder diffraction measurement. Monte Carlo calculation proposed the reliable structures of iron-rich phase of ppv-(Mg,Fe)SiO{sub 3}: Pmmn, Pmma, and Cm2m and Cmcm proposed by. The best-fit structure model with the highest reliability in the Rietveld fitting of ppv-(Mg{sub 0.6}Fe{sub 0.4})SiO{sub 3} is the structure of space group Pmma, in which Fe and Mg occupy two different sites of M1 and M2: the site occupancies are (Fe{sub 0.25}Mg{sub 0.75}) in the larger M1 site and (Fe{sub 0.55}, Mg{sub 0.45}) in the smaller M2 site. The two-site model is consistence with the previous results of X-ray emission and X-ray Moessbauer experiments.

36 MATERIALS SCIENCE↗

Materials in extreme environments.

Nature is rich with examples of phenomena and environments we might consider extreme, at least from our familiar experience on Earth's surface: large fluxes of radiation and particles from the Sun, explosive asteroid collisions in space, volcanic eruptions that originate deep underground, extraordinary pressures and temperatures in the interiors of planets and stars, and electromagnetic discharges that occur, say, in sunspots and pulsars. We often intentionally create similar extreme environments - for example, in high-powered lasers, high-temperature turbines, internal-combustion engines, and industrial chemical plants. The response of materials to the broad range of such environments signals the materials underlying structure and dynamics, provides insight into new phenomena, exposes failure modes that limit technological possibility, and presents novel routes for making new materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗