Search NASA⌕ Search

Engineering topics

Henager, Charles H.

Publications and source records attributed to Henager, Charles H..

At least 19 records

Reversing inverse Hall-Petch and direct computation of Hall-Petch coefficients

A 2D bicrystal atomistic model of dislocation transmission through a Σ11<101>{131} symmetric-tilt grain boundary reveals details of Hall-Petch breakdown in the single dislocation regime in Al, Ni, and Cu. Partly based on a previous study, this research determines the stress required for a single dislocation to be transmitted through the Σ11 boundary and finds that single dislocation transmission typically deviates from Hall-Petch behavior because the leading partial dislocation becomes trapped in the boundary and emits glissile grain boundary disconnections that cause boundary sliding deformation at stresses well below boundary transmission stresses. Thus, mechanisms of inverse Hall-Petch, namely grain boundary shear and sliding, are shown to operate in lieu of grain boundary transmission in the single dislocation regime. However, by controlling the applied stresses, inverse Hall-Petch can be reversed and typical Hall- Petch grain boundary transmission regained. This, in turn, allows the direct computation of Hall-Petch coefficients. Further, a second dislocation on the same slip plane preserves typical Hall-Petch behavior for Al and Ni and does not lead to boundary sliding events, thus implying a critical grain size for Hall-Petch breakdown based on the pileup model.

36 MATERIALS SCIENCE↗

Sequestration of Radionuclides in Metal–Organic Frameworks from Density Functional Theory Calculations

The high porosity, modularity, and synthetic diversity of metal-organic frameworks (MOFs) make them attractive candidate materials for selective sensing, separation, and sequestration of the radionuclides present in the nuclear wastes. Here, we use Density Functional Theory (DFT) calculations to determine the favorability of ion-exchange at the metal node of Tc, U, Th, Am, and Cm in Zr-, U-, and Th-based MOF clusters. A range of DFT methods, including several exchange-correlation functionals, DFT+U technique, relativistic effects, and magnetic effects are employed to establish robustness in the results. We also explore various reference states of ions including the vacuum, continuum water medium and explicit water molecules surrounding ions. Substitution of Tc, Am, Cm, and Th is believed to be energetically favorable in all the MOFs using ions surrounded by explicit water molecules as a reference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure-based model of nonlinear ultrasonic response in materials with distributed defects

Nonlinear ultrasonic technique is one of promising NDE methods for monitoring defect evolution in irradiated nuclear materials. In this work, we have studied the effect of distributed defects on nonlinear ultrasonic response, in particular, the nonlinear parameter ß from the 2nd harmonic wave. A three-dimensional microstructure-based model has been developed for investigating the dynamic interaction between distributed defects and a propagating longitudinal sound wave. Both linear and nonlinear materials are considered. It is known that the 2nd harmonic wave is generated when a monochromatic wave propagates in a nonlinear elastic material. The results show that second phase particles with elastic heterogeneity and lattice mismatch have strong impact on the nonlinear parameter ß. Lattice mismatches have more effect on the nonlinear parameter no matter they are expansion or contraction. The developed model enables one to explore the contributions of different types of defects to the nonlinear ultrasonic signals and shed light on the development of nonlinear ultrasound nondestructive detection of material defects in nuclear reactors.

Second harmonic generation, Scattered distributed ↗

ADVANCED-STEM-BASED DEEP LEARNING FOR SEMANTIC SEGMENTATION OF DEFECTS IN STEELS

In this work, we developed a novel deep convolutional neural network (DCNN) model, called DefectNet, for robust and automated semantic segmentation of three crystallographic defects including line dislocations, precipitates and voids commonly observed in structural metals and alloys. In previous work, we established an experimental protocol for a diffraction contrast imaging scanning transmission electron microscopy (DCI STEM) technique and tailored it specifically for imaging defects in popular iron-based structural alloy. Thus, the DefectNet was trained over a small but high-quality DCI STEM defect image sets of a HT-9 martensitic steel before and after neutron irradiation for 111.8 dpa at 412°C. For the defect quantification that typically takes at least half an hour even for an expert, with a good model the machine learning algorithm can produce more reproducible and reliable quantification in a few seconds. This work demonstrates the feasibility of using deep learning algorithms for fast and accurate defect quantitative analysis.

Machine Learning, Radiation effects, Image analysi↗

Flux-assisted CdTe and CdSe growth using an in-situ dynamic flux removal process

A flux-assisted in-situ dynamic flux removal process for growing CdTe is discussed where crystals larger than 1-cm have been achieved over times of a few days. Here, a metal getter (i.e., stainless steel, Pt, Cu, Ni, and Ag) was placed in the annulus outside of a glassy carbon crucible containing CdTe and Te (Cd30Te70) and this was sealed within an evacuated fused quartz ampoule. During the heat-treatment, the Te flux lowered the melting temperature of the mixture. After melting, the flux (and some CdTe) was removed from the crucible through volatility and reacted with the metal getter forming metal tellurides. This process was conducted at temperatures below the melting temperature of CdTe ( T m ~1041 °C) and once the flux was removed, the CdTe solidified into a solid polycrystalline ingot with several large grains. Following a 24-hr soak, a variety of cooling rates were evaluated including 0.1 °C min -1 , 1 °C min -1 , as well as furnace, air, and water quenching all with Pt as the getter. The slowest quench rate (0.1 °C min -1 ) yielded the largest-grained crystals. This process was then demonstrated in a gradient furnace using Cu and Ni getters to grow ingots of ~100 g. Additional data is presented showing how this approach was also used to grow CdSe ( T m = ~1268 °C), albeit with smaller grain sizes than were achieved with CdTe.

36 MATERIALS SCIENCE↗

Advanced manufacturing—A transformative enabling capability for fusion

Additive Manufacturing (AM) can create novel and complex engineered material structures. Features such as controlled porosity, micro-fibers and/or nano-particles, transitions in materials and integral robust coatings can be important in developing solutions for fusion subcomponents. A realistic understanding of this capability would be particularly valuable in identifying development paths. Major concerns for using AM processes with lasers or electron beams that melt powder to make refractory parts are the power required and residual stresses arising in fabrication. A related issue is the required combination of lasers or e-beams to continue heating of deposited material (to reduce stresses) and to deposit new material at a reasonable built rate while providing adequate surface finish and resolution for meso-scale features. Some Direct Write processes that can make suitable preforms and be cured to an acceptable density may offer another approach for PFCs.

Additive Manufacturing, fusion energy, Fusion Mate↗

Communication: First-principles evaluation of alkali ion adsorption and ion exchange in pure silica LTA zeolite

Utilizing first-principles calculations, we studied the adsorption of alkali ions in pure silica Linde Type A (LTA) zeolite. The probability of adsorbing alkali ions from solution and the driving force for ion exchange between Na + and other alkali ions at the different adsorption sites were analyzed. From the calculated ion exchange isotherms, we show that it is possible to exchange Na + with K + and Rb + in water, but that is not the case for systems in a vacuum. We additionallly demonstrate that a solvation model should be used for the accurate representation of ion exchange in an LTA and that dispersion interactions should be introduced with care.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hierarchical Materials as Tailored Nuclear Waste Forms: A Perspective

This perspective focuses on the synthesis, characterization and modeling of three classes of hierarchical materials with potential for sequestering radionuclides: nanoparticles, porous frameworks and crystalline salt inclusion phases. The scientific impact of hierarchical structures and the development of the underlying crystal chemistry is discussed as laying the groundwork for the design, local structure control, and synthesis of new forms of matter with tailored properties. This requires development of the necessary scientific understanding of such complex structures through integrated synthesis, characterization, and modeling studies that can allow their purposeful creation and properties. The ultimate practical aim is to provide the means to create novel structure types that can simultaneously sequester multiple radionuclides. The result will lead to the creation of safe and efficient, long lasting waste forms for fission products and transuranic elements that are the products of nuclear materials processing waste streams. The generation of the scientific base for working toward that goal is presented.

hierarchal material, review article, nuclear waste↗

Nonlinear ultrasonic response of voids and Cu precipitates in body-centered cubic Fe

Interpreting nonlinear ultrasonic signals detected in nondestructive evaluation of radiation damage needs the knowledge of the correlation between defects and nonlinearity. In this work, molecular dynamics simulations are performed to study the effect of distributed vacancies, voids, Cu atoms, and Cu precipitates on nonlinear ultrasonic response in body-centered cubic (bcc) Fe. The nonlinearity parameter calculated from the second harmonic amplitude in the perfect lattice is 2.73. Vacancies are found to increase the nonlinearity. Surprisingly, clusters of vacancies in the form of spherical voids show an opposite effect. This finding can be used to conveniently distinguish vacancies from voids in the material. Unlike vacancies, individual Cu atoms decrease the nonlinearity. Clustering of Cu atoms into Cu precipitates further decrease the nonlinearity. Interestingly, precipitates with a diameter of 2 nm and larger exhibit a similar effect despite their different structure and coherency with the Fe matrix.

Setyawan, Wahyu↗

The magnetic effects on the energetic landscape of Fe-Cu alloy: A model Hamiltonian approach

Using ab initio calculations and the magnetic cluster expansion formula, a model with the magnetic effects on the energetic landscape of Fe–Cu was developed. The (partially) disordered local moment picture and Monte Carlo simulation method were combined to study the magnetically disordering effects on the thermodynamic properties in Fe–Cu alloys. The simulation results show nonlinear enhancements of Fe magnetism with increasing Cu concentration under varying magnetic ordering/disordering states, and the nonlinearity of the enhancement is more significant under the ferromagnetic state. It is also found that magnetism has subtle effects on the clustering of Cu because both the substitutional and binding energies could be affected but in different ways depending on the magnetic states. The results suggest that the alloying-induced enhancement of the Fe magnetism is a fundamental feature of Fe–Cu, which introduces difference on the concentration dependence of mixing, depending on the magnetic ordering/disordering states. In conjunction with the concentration dependence of short-range ordering, the enhancement of Fe magnetism also strongly affects the Curie temperatures in Fe–Cu.

Ab Initio Calculations, Fe-Cu, ultrasonic backscat↗

Tuning piezoelectric properties through epitaxy of La 2 Ti 2 O 7 and related thin films

Current piezoelectric sensors and actuators are limited to operating temperatures less than ~200ºC due to the low Curie temperature of the piezoelectric material. The strengthening the piezoelectric coupling of high-temperature piezoelectric materials, such as La 2 Ti 2 O 7 (LTO), would allow sensors to operate across a broad temperature range. The crystalline orientation and piezoelectric coupling direction of LTO thin films can be controlled by epitaxial matching to SrTiO 3 (001), SrTiO 3 (110), and rutile TiO 2 (110) substrates via pulsed laser deposition. The structure and phase purity of the films are investigated by x-ray diffraction and scanning transmission electron microscopy. Piezoresponse force microscopy is used to measure the in-plane and out-of-plane piezoelectric coupling in the films. The strength of the out-of-plane piezoelectric coupling can be increased when the piezoelectric direction is rotated partially out-of-plane via epitaxy. The strongest out-of-plane coupling is observed for LTO/STO(001). Deposition on TiO 2 (110) results in epitaxial La 2/3 TiO 3 , an orthorhombic perovskite of interest as a microwave dielectric material and an ion conductor. La 2/3 TiO 3 can be difficult to stabilize in bulk form, and epitaxial stabilization on TiO 2 (110) is a promising route to realize La 2/3 TiO 3 for both fundamental studies and device applications. Overall, these results confirm that control of the crystalline orientation of epitaxial LTO-based materials can govern the resulting functional properties.

36 MATERIALS SCIENCE↗

PRECIPITATES AND VOIDS IN CUBIC SILICON CARBIDE IMPLANTED WITH 25Mg+ IONS

This study reports on the formation of 25Mg-bearing precipitates and voids in cubic phase silicon carbide (3C-SiC) single crystals implanted to 9.6×1016 25Mg+/cm2 at 673 K and subsequently annealed at 1073 and 1573 K for 2, 6 and 12 h in an Ar environment. Unidirectionally aligned tetrahedral precipitates are observed around the Mg profile peak, many of which are likely cubic MgC2 and tetragonal Mg2Si particles or their precursor structures. There is also evidence that suggests a possible formation of core (MgC2)-shell (Mg2Si) structure in some of the large precipitates. In addition, small spherical voids are observed near the surface, along with the larger faceted voids in the region of maximum vacancy concentration. 25Mg segregation takes place with a dominant fraction of small atomic clusters. The study provides important results needed to fully assess SiC for potential fusion applications.

Jiang, Weilin↗

A dual-phase microstructural approach to damage and fracture of Ti 3 SiC 2 /SiC joints

We investigate the microcracking mechanisms responsible for Ti 3 SiC 2 /SiC joint damage observed at the macroscopic scale after neutron irradiation experiments in detail. A dual-phase microstructural approach to damage and fracture of Ti 3 SiC 2 /SiC joints is developed that uses a finely discretized two-phase domain based on a digital image of an actual microstructure involving embedded Ti 3 SiC 2 and SiC phases. The behaviors of SiC and Ti 3 SiC 2 in the domain are described by the continuum damage mechanics (CDM) model reported in Nguyen et al., J. Nucl. Mater., 2017, 495:504–515. This CDM model describes microcracking damage in brittle ceramics caused by thermomechanical loading and irradiation-induced swelling. The dual-phase microstructural model is applied to predict the microcracking mechanisms occurring in a typical Ti 3 SiC 2 /SiC joint subjected to heating to 800 °C followed by irradiation-induced swelling at this temperature and cooling to room temperature after the applied swelling has reached the maximum swelling levels observed in the experiments for SiC and Ti 3 SiC 2 . The model predicts minor damage of the joint after heating but significant microcracking in the SiC phase and along the boundaries between SiC and Ti 3 SiC 2 as well as along the bonding joint during irradiation-induced swelling and cooling to room temperature. Our predictions qualitatively agree with the limited experimental observations of joint damage at this irradiation temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multifaceted Modularity: A Key for Stepwise Building of Hierarchical Complexity in Actinide Metal–Organic Frameworks

Growing necessity for efficient nuclear waste management is a driving force for development of alternative architectures towards fundamental understanding of mechanisms involved in actinide integration inside extended structures. In this manuscript, metal-organic frameworks (MOFs) were investigated as a model system for engineering radionuclide containing materials through utilization of unprecedented MOF modularity, which cannot be replicated in any other type of materials. Through the implementation of recent synthetic advances in the MOF field, hierarchical complexity of An-materials were built stepwise, which was only feasible due to preparation of the first examples of actinide-based frameworks with “unsaturated” metal nodes. The first successful attempts of solid-state metathesis and metal node extension in An-MOFs are reported, and the results of the former approach revealed drastic differences in chemical behavior of extended structures versus molecular species. Successful utilization of MOF modularity also allowed us to structurally characterize the first example of bimetallic An-An nodes. To the best of our knowledge, through combination of solid-state metathesis, guest incorporation, and capping linker installation, we were able to achieve the highest Th wt% in mono- and bi-actinide frameworks with minimal structural density. Overall, combination of a multistep synthetic approach with homogeneous actinide distribution and moderate solvothermal conditions could make MOFs an exceptionally powerful tool to address fundamental questions responsible for chemical behavior of An-based extended structures, and therefore, shed light on possible optimization of nuclear waste administration.

Actinide↗

Modeling thermal and irradiation-induced swelling effects on the integrity of Ti 3 SiC 2 /SiC joints

Previously, results for CVD-SiC joints created using solid state displacement reactions to form a dual-phase SiC/MAX phase irradiated at 800°C and 5 dpa indicated some extent of cracking in the joint and along the CVD-SiC/joint interface. This paper elucidates the origin of cracking by thermomechanical modeling combined with irradiation-induced swelling effects using a continuum damage approach with support of micromechanical modeling. Three irradiation temperatures (400°C, 500°C and 800°C) are considered assuming experimental irradiation doses in a range leading to saturation swelling in SiC. The analyses indicate that a SiC/MAX joint heated to 400°C fails during irradiation-induced swelling at this temperature while it experiences some damage after being heated to 500°C and irradiated at the same temperature. However, it fails during cooling from 500°C to room temperature. The joint experiences minor damage when heated to and irradiated at 800°C but does not fail after cooling. The prediction agrees with the experimental findings available for this case.

damage modeling↗

Al/Zr/U-10Mo Foil Sensitivity Analyses

This report describes modeling work performed to analyze typical uranium (U)-10 wt percent molybdenum (Mo) foils co-rolled with zirconium (Zr) and clad in aluminum (Al). The purpose of the analyses was to predict foil integrity, while accounting for the mechanical properties, thickness, and roughness of the Zr-layer coating.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Damage evolution of ion irradiated defected-fluorite La 2 Zr 2 O 7 epitaxial thin films

Pyrochlore-structure oxides, A2B2O7, may exhibit remarkable radiation tolerance due to the ease with which they can accommodate disorder by transitioning to a defected fluorite structure. The mechanism of defect formation was explored by evaluating the radiation damage behavior of high quality epitaxial La2Zr2O7 thin films with the defected fluorite structure, irradiated with 1 MeV Zr+ at doses up to 10 displacements per atom (dpa). The level of film damage was evaluated as a function of dose by Rutherford backscattering spectrometry in the channeling geometry (RBS/c) and scanning transmission electron microscopy (STEM). At lower doses, the surface of the La2Zr2O7 film amorphized, and the amorphous fraction as a function of dose fit well to a stimulated amorphization model. As the dose increased, the surface amorphization slowed, and amorphization appeared at the interface. Even at a dose of 10 dpa, the core of the film remained crystalline, despite the prediction of amorphization from the model. To inform future ab initio simulations of La2Zr2O7, the bandgap of a thick La2Zr2O7 film was measured to be indirect at 4.96 eV, with a direct transition at 5.60 eV.

Environmental Molecular Sciences Laboratory↗