Search NASA⌕ Search

Engineering topics

Henk Eskes

Publications and source records attributed to Henk Eskes.

7 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Quantifying urban, industrial, and background changes in NO2 during the COVID-19 lockdown period based on TROPOMI satellite observations

The COVID-19 lockdown had a large impact on anthropogenic emissions of air pollutants and particularly on nitrogen dioxide (NO 2 ). While the overall NO 2 decline over some large cities is well-established, understanding the details remains a challenge since multiple source categories contribute. In this study, a new method of isolation of three components (background NO 2 , NO 2 from urban sources, and NO 2 from industrial point sources) is applied to estimate the impact of the COVID-19 lockdown on each of them. The approach is based on fitting satellite data by a statistical model with empirical plume dispersion functions driven by a meteorological reanalysis. Population density and surface elevation data as well as coordinates of industrial sources were used in the analysis. The tropospheric NO 2 vertical column density (VCD) values measured by the Tropospheric Monitoring Instrument (TROPOMI) on board the Sentinel-5 Precursor over 261 urban areas for the period from 16 March to 15 June 2020 were compared with the average VCD values for the same period in 2018 and 2019. While the background NO 2 component remained almost unchanged, the urban NO 2 component declined by −18 % to −28 % over most regions. India, South America, and a part of Europe (particularly, Italy, France, and Spain) demonstrated a −40 % to −50 % urban emission decline. In contrast, the decline over urban areas in China, where the lockdown was over during the analysed period, was, on average, only -4.4± 8 %. Emissions from large industrial sources in the analysed urban areas varied greatly from region to region from -4.8 ± 6 % for China to -40 ± 10 % for India. Estimated changes in urban emissions are correlated with changes in Google mobility data (the correlation coefficient is 0.62) confirming that changes in traffic were one of the key elements in the decline in urban NO2 emissions. No correlation was found between changes in background NO2 and Google mobility data. On the global scale, the background and urban components were remarkably stable in 2018, 2019, and 2021, with averages of all analysed areas all being within ±2.5 % and suggesting that there were no substantial drifts or shifts in TROPOMI data. The 2020 data are clearly an outlier: in 2020, the mean background component for all analysed areas (without China) was -6.0 % ± 1.2 % and the mean urban component was -26.7 ± 2.6 % or 20σ below the baseline level from the other years.

COVID-19↗
NASA NTRS2019

Enhanced Capabilities of TROPOMI NO2: Estimating NOX from North American Cities and Power Plants

The TROPOspheric Monitoring Instrument (TROPOMI) is used to derive top-down NOXemissions for twolarge power plants and three megacities in North America. Wefirst re-process the vertical column NO2with an improved airmass factor to correct for a known systematic low bias in the operational retrieval near urban centers. For the two power plants,top-down NOXemissions agree to within 10% of the emissions reported by the power plants. We then derive top-down NOXemissions rates for New York City, Chicago, and Toronto, and compare them to projected bottom-up emissions inventories. Inthis analysis of 2018 NOXemissions, wefind a +22% overestimate for New York City, a−21% underestimate in Toronto, andgood agreement in Chicago in the projected bottom-up inventories when compared to the top-down emissions. Top-downNOXemissions also capture intraseasonal variability, such as the weekday versus weekend effect (emissions are +45% larger onweekdays versus weekends in Chicago). Finally, we demonstrate the enhanced capabilities of TROPOMI, which allow us toderive a NOXemissions rate for Chicago using a single overpass on July 7, 2018. The large signal-to-noise ratio of TROPOMI iswell-suited for estimating NOXemissions from relatively small sources and for sub-seasonal timeframes.

TROPOspheric Monitoring Instrument (TROPOMI)↗
NASA NTRS2018

High‐Resolution Mapping of Nitrogen Dioxide With TROPOMI: First Results and Validation Over the Canadian Oil Sands

TROPOspheric Monitoring Instrument (TROPOMI), on-board the Sentinel-5 Precursersatellite, is a nadir-viewing spectrometer measuring reflected sunlight in the ultraviolet, visible,near-infrared, and shortwave infrared. From these spectra several important air quality and climate-relatedatmospheric constituents are retrieved, including nitrogen dioxide (NO2) at unprecedented spatialresolution from a satellite platform. We present the first retrievals of TROPOMI NO2over the Canadian OilSands, contrasting them with observations from the Ozone Monitoring Instrument satellite instrument,and demonstrate TROPOMI's ability to resolve individual plumes and highlight its potential for derivingemissions from individual mining facilities. Further, the first TROPOMI NO2validation is presented,consisting of aircraft and surface in situ NO2observations, and ground-based remote-sensingmeasurements between March and May 2018. Our comparisons show that the TROPOMI NO2verticalcolumn densities are highly correlated with the aircraft and surface in situ NO2observations, and theground-based remote-sensing measurements with a low bias (15–30 %); this bias can be reduced byimproved air mass factors. Plain Language Summary: Nitrogen dioxide (NO2) is a pollutant that is linked to respiratoryhealth issues and has negative environmental impacts such as soil and water acidification. Near thesurface the most significant sources of NO2are fossil fuel combustion and biomass burning. With a recentlylaunched satellite instrument (TROPOspheric Monitoring Instrument [TROPOMI]), NO2can be measuredwith an unprecedented combination of accuracy, spatial coverage, and resolution. This work presents thefirst TROPOMI NO2measurements near the Canadian Oil Sands and shows that these measurements havean outstanding ability to detect NO2on a very high horizontal resolution that is unprecedented for satelliteNO2observations. Further, these satellite measurements are in excellent agreement with aircraft andground-based measurements.

TROPOspheric Monitoring Instrument (TROPOMI)↗
NASA NTRSDate not supplied

Verification of TROPOMI NO2 Product Using OMI NO2 algorithm

We evaluated S5P TROPOspheric Monitoring Instrument (TROPOMI) operational nitrogen dioxide (NO2) product by comparing with the NO2 retrievals from Ozone Monitoring Instrument (OMI) onboard NASA’s Aura satellite. We compared spatially matched NO2 vertical column density (VCD) data from OMI and TROPOMI to identify any discrepancies between the two operational products. We also applied OMI Air-Mass Factor (AMF) algorithm to TROPOMI Slant Column Density (SCD) data (v02.03.01) aiming to create long-term merged NO2 Earth Science Data Record (https://disc.gsfc.nasa.gov/datasets/TROPOMI_MINDS_NO2_1.1/summary ). The algorithm (version 4.0) uses new Geometry-dependent Lambertian Equivalent surface Reflectivity (GLER) product available for each TROPOMI pixel. GLER is pre-calculated using the vector linearized discrete ordinate radiative transfer (VLIDORT) model, which uses as input high-resolution bidirectional reflectance distribution function (BRDF) information from NASA's Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) over land and the wind-dependent Cox–Munk wave-facet slope distribution over water, the latter with a contribution from the water-leaving radiance based on MODIS gap-filled in-water chlorophyll-a data. The GLER data, combined with consistently retrieved cloud parameters, provide improved information for the calculation of the scattering weight profiles. Additional AMF improvements result from using high resolution (0.25o latitude x 0.25o longitude) a priori NO2 profile shapes and other auxiliary information from the Global Modeling Initiative (GMI) Replay simulation sampled using S5P orbital simulator. Our TROPOMI_MINDS_NO2 algorithm employs the stratosphere-troposphere separation scheme, de-striping, and surface snow/ice treatment consistently with the latest OMI NO2 re-processing (version 4). We evaluate the TROPOMI_MINDS_NO2 product by comparing with the S5P operational NO2 product as well as with independent NO2 observations from ground-based Pandora and aircraft observations. Our results indicate that the new TROPOMI_MINDS_NO2 retrievals are generally higher than the S5P operational NO2 product over polluted regions and show improved agreement with independent validation data.

TROPOMI↗