Engineering topics

Henry, D. P., Jr.

Publications and source records attributed to Henry, D. P., Jr..

3 records

NASA NTRS1991

Elastic stress analysis of three-dimensional solids with small holes by BEM

An advanced level development of the boundary element method is presented for the elastic stress analysis of a three-dimensional solid containing a large number of small diameter, tubular shaped holes. The formulation has been developed such that these holes can be modeled by a system of curvilinear line elements, resulting in substantial savings in both data preparation and computing costs. This is accomplished by assuming a variation in the displacement field along the circumference defined in terms of trigonometric functions together with a linear or quadratic variation of displacements along the longitudinal direction.

Henry, D. P., Jr.↗

NASA NTRS1991

Micromechanical studies of composites by BEM

Over the last five years BEM has been developed into a very effective tool for micromechanical studies of composites. The analyses developed range from static elastic analysis, steady state heat transfer, steady state and transient thermoelastic analysis, periodic and transient dynamic analysis. Currently some of these analyses are being extended to nonlinear micromechanical analyses involving viscoplasticity, elastoplasticity, combined plasticity fracture and creep. The paper describes some of the results for elastic analysis, heat transfer and thermoelastic analyses.

Banerjee, P. K.↗

NASA NTRS1989

Advanced applications of BEM to inelastic analysis of solids

Newly evolved boundary element solution algorithms are utilized for solving a range of elastoplastic and thermoplastic problems. The first algorithm is the typical iterative procedure in which the unknown boundary solution and the initial stress (or strain) rates are found together in an incremental iterative fashion. The second one is a variable stiffness type approach in which the incremental boundary solution is obtained in a direct (noniterative) manner. The third procedure differs from the two prior algorithms in that volume integration is not needed to incorporate the nonlinear effects in the analysis. Instead, initial stress rates are introduced in the boundary element system by way of particular integrals. The methodology is used in a general purpose, multiregion system that employs quadratic isoparametric shape functions to model the geometry and field variables of the body and can admit up to 15 substructured areas of different material properties.

Banerjee, P. K.↗