Engineering topics
Publications and source records attributed to Henry, P..
A robotic flyby mission to the planet Pluto is being planned for launch early in the next decade. The spacecraft will continue on out of the solar system in an almost radial direction traveling at about four AU per year and begin transiting the Kuiper Belt shortly after Pluto encounter.
The use of an electromechanical device for optically positioning a mirror system during the pre-project phase of the Pluto Fast Flyby mission was evaluated at JPL. The device under consideration was a piezoelectric driven linear motor functionally dependent upon a time varying electric field which induces displacements ranging from submicrons to millimeters with positioning accuracy within nanometers.
The Jet Propulsion Laboratory evaluated the use of an electromechanical device for optically positioning a mirror system during the pre-project phase of the Pluto-Fast-Flyby (PFF) mission. The device under consideration was a piezoelectric driven linear motor functionally dependent upon a time varying electric field which induces displacements ranging from submicrons to millimeters with positioning accuracy within nanometers. Using a control package, the mirror system provides image motion compensation and mosaicking capabilities. While this device offers unique advantages, there were concerns pertaining to its operational capabilities for the PFF mission. The issues include irradiation effects and thermal concerns. A literature study indicated that irradiation effects will not significantly impact the linear motor's operational characteristics. On the other hand, thermal concerns necessitated an in depth study.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
In an effort to complete the initial reconnanissance of our solar system, the Jet Propulsion Laboratory (JPL) is designing a mission to send two very small spacecraft to explore Pluto and its moon, Charon.
CNES spherical and NASA hemispherical large aperture calibration sources are examined using a laboratory transfer spectroradiometer and SPOT-2 instruments. The sources, collected at Matra in France during October 1987, are compared in terms of absolute calibration, linearity, and uniformity. The laboratory transfer spectroradiometer data reveal that the calibration results correspond to within about 7 percent absolute accuracy level and the linearity of the CNES source with lamp level is good. It is observed using the satellite data that both sources have an excellent uniformity over a 4 deg field of view.
Project Analysis and Integration (PA&I) performed planning and integration activities to support management of the various Flat-Plate Solar Array (FSA) Project R&D activities. Technical and economic goals were established by PA&I for each R&D task within the project to coordinate the thrust toward the National Photovoltaic Program goals. A sophisticated computer modeling capability was developed to assess technical progress toward meeting the economic goals. These models included a manufacturing facility simulation, a photovoltaic power station simulation and a decision aid model incorporating uncertainty. This family of analysis tools was used to track the progress of the technology and to explore the effects of alternative technical paths. Numerous studies conducted by PA&I signaled the achievement of milestones or were the foundation of major FSA project and national program decisions. The most important PA&I activities during the project history are summarized. The PA&I planning function is discussed and how it relates to project direction and important analytical models developed by PA&I for its analytical and assessment activities are reviewed.
Luminosity-temperature (L-T) relations are derived for a self-gravitating isothermal gas sphere and for an isothermal gas sphere in hydrostatic equilibrium with the total mass of a cluster of galaxies. The relationships are compared with X-ray data for 13 clusters of galaxies. The L-T relation for the self-gravitating isothermal gas sphere is found to predict X-ray luminosities that are considerably larger than those observed, and the corresponding model is ruled out. It is shown, however, that the L-T relation for the isothermal gas sphere in hydrostatic equilibrium with total cluster mass is consistent with X-ray observations for reasonable choices of the ratio between central density and confining-mass density. Core radii or gas temperatures are predicted for five of the 13 clusters considered.
Explore the source record for details and available documents.
The 3700 square degrees around the South Equatorial Pole have been surveyed using a broad-band photometer with peak response at 90 A. One source was detected at about the same intensity as HZ 43. An extrapolation of the results implies that there are about 10 extreme-ultraviolet objects over the whole sky which are as bright as HZ 43. Implications of these results for theories of white dwarf evolution are briefly discussed.
Explore the source record for details and available documents.
The paper describes an X-ray detector using microchannel plates as a photocathode surface and imaging photoelectron multiplier, and a crossed wire grid as a two-dimensional position-sensitive detector. The position resolution is 10 microns. The crossed wire grid consists of 100-micron-diam wires on 200-micron centers. Position sensing is accomplished by electronic interpolation to 1/20 of the wire spacing. The quantum efficiency of the microchannel plates varies from 29% at 0.28 keV to 5% at 3 keV. This detector will provide second-of-arc X-ray imaging in the focal plane of the 342.9-cm focal length grazing-incidence telescope being prepared for the HEAO-B observatory. By addition of suitable photocathodes, it can be used for single-photon imaging light detection in the UV, visible, and near-IR-ranges. In all cases, it gives a very low dark counting rate, allows timing of individual events to 1 microsec or less, and can handle counting rates up to 10,000 per sec.
Explore the source record for details and available documents.
A grazing incidence one-dimensional focusing collector for use in the extreme ultraviolet is described. The collector has a field of view of 1 x 50 deg, a focal length of 3015 cm, and a total unobstructed area of 224 sq cm. The instrument employs an interchangeable detector package of either channel-electron multipliers or proportional counters which yield a limiting sensitivity of 1.0 photons/sq cm sec A at 170 A and 0.05 photons/sq cm sec A at 90 A, respectively, for one second integrations. The design and calibration of the instrument are described in detail. Data obtained by this instrument during recent rocket flights are presented.
Explore the source record for details and available documents.