Pluto Mission Development: Prototype Instrument and Subsystem Testing
Explore the source record for details and available documents.
prototype hardware Pluto mission subsytem testing ↗
Engineering topics
Henry, Paul K.
Publications and source records attributed to Henry, Paul K..
Last but not Least: The Trip to Pluto
None given. Paper discusses Pluto and its moon, Charon, and issues concerning missions to explore them.
Pluto Charon↗
Spacecraft Missions to Pluto and Charon
Explore the source record for details and available documents.
Pluto CharonFlyby Mission↗
The Pluto fast flyby mission: Completing the reconnaissance of the solar system
The concept of a fast flyby mission to Pluto has been advanced as a means to complete the reconnaissance of the known solar system. In order to acquire data on the Pluto system at the earliest possible time, and within the professional lifetime of investigators now active in the field, concepts are being developed for relatively small spacecraft in the mass range of 70 Kg to 350 Kg with flight times to Pluto of 7 to 13 years. Necessarily, the science complement on such a mission will be very mass and power limited. The challenge will be to define a spacecraft and an instrument package that will maximize the scientific return within these limitations. Cost, of course, will be a major consideration, and funds for new technology development specific to this mission will not be extensive. Consequently, innovative ways to incorporate elegant simplicity into the designs must be found. In order to facilitate exploration of the Pluto-Charon system, fully integrated science payloads must be developed. Two proposed mission designs involving limited mass and power science payloads have been presented to the Outer Planets Science Working Group (OPSWG). These payload mass allocations range from 5 to 30 kilograms with power allocations as low as 5 watts. The drivers behind these low mass and power allocations are that they enable developing missions to fit within the moderate mission cost profile and allow fast flight times to Pluto (7 to 13 years). The OPSWG has prioritized science goals for this class of reconnaissance mission. Three specific science objectives were identified as the highest priority required for the first Pluto mission. These goals were: (1) study of the neutral atmosphere, (2) geology and morphology, and (3) surface compositional mapping. In order to achieve these science goals within the constraints of low mass, power and cost, it may be necessary to combine the functions of 3 conventional instruments (CCD camera, Ultra-Violet Spectrometer, and Infrared Spectrometer) into one fully integrated payload. Where possible, this payload would share optics, mechanisms, electronics and packaging.
Henry, Paul K.↗
The Pluto Fast Flyby Mission: Completing the Reconnaissance of the Solar System
The concept of a fast flyby mission to Pluto has been advanced as a means to complete the reconnaissance of the known solar system. In order to acquire data on the Pluto system at the earliest possible time, and within the professional lifetime of investigators now active in the field, concepts are being developed for relatively small spacecraft in the mass range of 70 Kg to 350 Kg with flight times to Pluto of 7 to 13 years. Necessarily, the science complement on such a mission will be very mass and power limited. The challenge will be to define a spacecraft and an instrument package that will maximize the scientific return within these limitations. Cost, of course, will be a major consideration, and funds for new technology development specific to this mission will not be extensive...
Henry, Paul K.↗
Portable Power And Digital-Communication Units
Conceptual network of electronic-equipment modules provides electrical power and digital radio communications at multiple sites not served by cables. System includes central communication unit and portable units powered by solar photovoltaic arrays. Useful to serve equipment that must be set up quickly at remote sites or buildings that cannot be modified to provide cable connections.
Levin, Richard R.↗
Device for mechanically stabilizing web ribbon buttons during growth initiation
The invention relates to a stabilization device for stabilizing dendritic web seed buttons during initiation of crystal growth from a float melt zone. The invention includes angular maintenance means for maintaining a constant angular orientation between the axis of a growth initiation seed and the upper surface of a web button during withdrawal of the web button from the melt. In the preferred embodiment, the angular means includes an adjustable elevation tube which surrounds the seed, the weight of which may be selectively supported by the seed button during web button withdrawal.
Henry, Paul K.↗
Space Vehicle Deployment from Space Station Orbit
When launching a spacecraft from Earth parking orbit to deep space, it is highly desirable to have the hyperbolic excess velocity vector (v-infinity) contained in the parking orbit plane. Ground launches can force the parking orbit plane to contain the v-infinity vector by using launch azimuth and lift-off time as independent variables. When launching from the Space Station, a new set of variables comes into play. The Station orbit is of fixed inclination but precessing due to the Earth's oblateness. Its plane will seldom (and may never) contain the desired v-infinity vector. Consequently, the departure strategy will usually require multiple burns and include a plane change. Also, the concept of "launch period" will be somewhat different from Earth surface launches. An analysis of the deployment of interplanetary spacecraft from Space Station is described, with emphasis on the effect of the trajectory characteristics on station operations. Several planetary mission types are analyzed for manned Mars missions. In addition, high declination departures of spacecraft on unmanned missions to an asteroid are examined. The constraint of Station orbit nodal position is quantified and the operational implications for station reboost strategy are examined.
Henry, Paul K.↗
Space vehicle deployment from Space Station
When launching a spacecraft from Earth parking orbit to deep space, it is highly desirable to have the hyperbolic excess velocity vector (v-infinity) contained in the parking orbit plane. Ground launches can force the parking orbit plane to contain the v-infinity vector by using launch azimuth and lift-off time as independent variables. When launching from the Space Station, a new set of variables comes into play. The Space Station orbit is of fixed inclination but precessing due to the Earth's oblateness. Its plane will seldom (and may never) contain the desired v-infinity vector. Consequently, the departure strategy will usually require multiple burns and include a plane change. Also, the concept of 'launch window' will be somewhat different from Earth surface launches. An analysis of the deployment of interplanetary spacecraft from the Space Station is described, with emphasis on the effect of the trajectory characteristics on station operations. Several planetary mission types are analyzed, including manned Mars missions and unmanned high declination departures. The constraint of Space Station orbit nodal position is quantified and the operational implications for Space Station reboost strategy are examined.
Henry, Paul K.↗
High-Resolution, Two-Wavelength Pyrometer
Modified two-color pyrometer measures temperatures of objects with high spatial resolution. Image focused on hole 0.002 in. (0.05 mm) in diameter in brass sheet near end of bundle, causing image to be distributed so fibers covered by defocused radiation from target. Pinhole ensures radiation from only small part of target scene reaches detector, thus providing required spatial resolution. By spreading radiation over bundle, pinhole ensures entire active area of detectors utilized. Produces signal as quiet as conventional instruments but with only 1/64 input radiation.
Bickler, Donald B.↗
High resolution color band pyrometer ratioing
The sensing head of a two-color band ratioing pyrometer of a known type using a fiber optic cable to couple radiation to dual detector photodiodes is improved to have high spatial resolution by focusing the radiation received through an objective lens (i.e., by focusing the image of a target area) onto an opaque sheet spaced in front of the input end of the fiber optic cable. A two-mil hole in that sheet then passes radiation to the input end of the cable. The detector has two channels, one for each color band, with an electronic-chopper stabilized current amplifier as the input stage followed by an electronic-chopper stabilized voltage amplifier.
Bickler, Donald B.↗
Stabilizing Silicon-Ribbon Growth At Early Stages
Device mechanically stabilizes buttons from which silicon ribbons grown by dendritic-web process. Eliminates tendency for button to tip and interrupt pull because of asymmetry. Silicon seed hangs from holder through stabilizing tube. While button growing, tube elevated above melt surface. When ready for pulling of ribbon, tube comes to rest on button and prevents tipping. Large button used. Even if button assumes highly-asymmetrical weight distrubtion in early stages of growth, little danger of tipping and breakage of nascent ribbon.
Henry, Paul K.↗