Engineering topics

Hensleigh, Ryan

Publications and source records attributed to Hensleigh, Ryan.

7 records

DOE OSTI2025

Ultra-light antennas via charge programmed deposition additive manufacturing

Abstract The demand for lightweight antennas in 5 G/6 G communication, wearables, and aerospace applications is rapidly growing. However, standard manufacturing techniques are limited in structural complexity and easy integration of multiple material classes. Here we introduce charge programmed multi-material additive manufacturing platform, offering unparalleled flexibility in antenna design and the capability for rapid printing of intricate antenna structures that are unprecedented or necessitate a series of fabrication routes. Demonstrating its potential, we present a transmitarray antenna composed of an interconnected, multi-layered array of dielectric/conductive S-ring unit cells, reducing 94% mass of conventional antenna configurations. A fully printed circular polarized transmitarray system fed by a source and a Risley prism antenna system operating at 19 GHz both show close alignment between testing results and numerical simulations. This printing method establishes a universal platform, propelling discovery of new antenna designs and enabling data-driven design and optimizations where rapid production of antenna designs is crucial.

Science & Technology - Other Topics↗

DOE OSTI2024

Additive manufacturing of hierarchical three- dimensional micro-architected aerogels

Disclosed here is a method for making a three-dimensional micro-architected aerogel, comprising: (a) curing a reaction mixture comprising a co-sol-gel material (e.g., graphene oxide (GO)) and at least one catalyst to obtain a crosslinked co-sol-gel (e.g., GO hydrogel); (b) providing a photoresin comprising a solvent, a photoinitiator, a crosslinkable polymer precursor, and a dispersion of the crosslinked co-sol-gel (e.g., GO hydrogel); (c) curing the photoresin using projection microstereolithography layer-by-layer to produce a wet gel having a pre-designed three-dimensional structure; (d) drying the wet gel to produce a dry gel; and (e) pyrolyzing the dry gel to produce a three-dimensional micro-architected aerogel (e.g., graphene aerogel). Also disclosed is a photoresin for projection microstereolithography, comprising a solvent, a photoinitiator, a crosslinkable polymer precursor, and a dispersion of a crosslinked co-sol-gel.

Worsley, Marcus A.↗

DOE OSTI2024

Charge‐Programmable Photopolymers for 3D Electronics via Additive Manufacturing

Charge‐programmed 3D printing enables the fabrication of 3D electronics with lightweight and high precision via selective patterning of metals. This selective metal deposition is catalyzed by Pd nanoparticles that are specifically immobilized onto the charged surface and promises to fabricate a myriad of complex electronic devices with self‐sensing, actuation, and structural elements assembled in a designed 3D layout. However, the achievable property space and the material‐performance correlation of the charge‐programmed printing remain unexplored. Herein, a series of photo‐curable resins are designed for unveiling how the charge and crosslink densities synergistically impact the nanocatalyst‐guided selective deposition in catalytic efficiency and properties of the 3D printed charge‐programmed architectures, leading to high‐quality 3D patterning of solid and liquid metals. The findings offer a wide tunability of the structural properties of the printed electronics, ranging from stiff to extreme flexibility. Capitalizing on these results, the printing and successful application of an ultralight‐weight and deployable 3D multi‐layer antenna system operating at an ultrahigh‐frequency of 19 GHz are demonstrated.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Design and additive manufacturing of optimized electrodes for energy storage applications

Supercapacitors exhibit fast charging/discharging ability and have attracted considerable attention within the automotive, aerospace, and telecommunication industries. Porous carbons, prized for their high electrical conductivity and high surface area, have been attractive candidates for supercapacitor electrodes. Moving to thick electrodes is one strategy to further increase energy density due to a higher volume fraction of active material. However, thick electrodes suffer from sluggish charged species transport, which is why thin electrodes are currently favored. In this work, we investigate the use of computational optimization and additive manufacturing to design and fabricate thick porous electrodes with improved performance. Electrode performance was maximized by designing their morphologies via topology optimization and printing by projection micro stereolithography (PμSL) using commercial resin (PR48). The PR48 resin was then pyrolyzed (PR48-P) to create the final conductive electrode. The optimized PR48-P electrodes exhibited 99% improvement in capacitance compared to control electrodes printed with cubic lattice morphologies. To further improve performance, we formulated a resin combining graphene oxide (GO) and trimethylolpropane triacrylate (TMPTA). Electrodes printed with 3 wt% GO in TMPTA exhibited improved capacitance retention after pyrolysis compared to the PR48-P electrodes. Finally, this work demonstrates the benefits of using topology optimization to design electrodes and material development to improve functional properties of 3D printable electrodes.

25 ENERGY STORAGE↗

DOE OSTI2021

Optically enhanced patternable photosensitivity via oxygen excitation

The present disclosure relates to a method for performing a three dimensional (3D) printing process. A primary light beam having a wavelength sufficient to initiate polymerization of a photoresin is generated and patterned into a patterned primary beam. The patterned primary beam is directed toward an ultraviolet (UV) or visible light sensitive photoresin to initiate polymerization of select areas of the photoresin. The photoresin is also illuminated with a secondary light beam having a wavelength of at least one of about 765 nm, 1064 nm, or 1273 nm. The secondary light beam stimulates triplet oxygen into singlet oxygen, which controls oxygen inhibition in additional areas bordering the select areas, to enable controlled polymerization inhibition in the additional areas bordering the select areas.

Hensleigh, Ryan↗

DOE OSTI2021

System and method for stimulated emission depletion projection stereolithography

The present disclosure relates to a system for forming a three dimensional (3D) part. The system may incorporate a beam delivery subsystem for generating optical signals, and a mask subsystem that receives the optical signals and generates optical images therefrom. A first one of the optical images activates a polymerization species of a photo-sensitive resin in accordance with illuminated areas thereof, to thus cause polymerization of select portions of the photo-sensitive resin to help form a layer of the 3D part. A second one of the optical images causes stimulated emission depletion of subportions of the polymerization species, simultaneously, over various areas of the layer, to enhance resolution of at least one subportion of the select portions of the photo-sensitive resin.

Hensleigh, Ryan↗

DOE OSTI2020

Optically enhanced patternable photosensitivity via oxygen excitation

A method is disclosed for performing a three dimensional (3D) printing process. The method involves generating a primary light beam having a wavelength sufficient to initiate polymerization of a photoresin, and patterning the primary light beam into a patterned primary beam. The patterned primary beam may be directed toward an ultraviolet (UV) or visible light sensitive photoresin to initiate polymerization of select areas of the photoresin. The photoresin may be illuminated with a secondary light beam having a wavelength of about 765 nm to stimulate triplet oxygen into singlet oxygen, to thus control oxygen inhibition in additional areas bordering the select areas, to control polymerization inhibition in the additional areas bordering the select areas.

36 MATERIALS SCIENCE↗