Engineering topics

Herakovich, C. T.

Publications and source records attributed to Herakovich, C. T..

At least 37 records · Page 2

NASA NTRS1986

ANISAP: A three-dimensional finite element program for laminated composites subjected to mechanical loading

ANISAP is a 3-D finite element FORTRAN 77 computer code for linear elastic, small strain, analysis of laminated composites with arbitrary geometry including free edges and holes. Individual layers may be isotropic or transversely isotropic in material principal coordinates; individual layers may be rotated off-axis about a global z-axis. The laminate may be a hybrid. Three different isoparametric elements, variable order of gaussian integration, calculation of stresses at element boundaries, and loading by either nodal displacement of forces are included in the program capability. Post processing capability includes failure analysis using the tensor polynominal failure criterion.

Burns, S. W.↗

NASA NTRS1986

Shear characterization of unidirectional composites with the off-axis tension test

The influence of end constraints on accurate determination of the intralaminar shear modulus G(12) from an off-axis tension test is examined both analytically and experimentally. The Pagano-Halpin (1968) model is employed to illustrate that, when the effect of end constraints is properly considered, the exact expression for G(12) is obtained. When the effect of end constraints is neglected, expressions for the apparent shear modulus G(12)-asterisk and apparent Young's modulus Exx-asterisk are obtained. Numerical comparison for various off-axis configurations and aspect ratios is carried out using typical material properties for graphite/polyimide unidirectional composites. It is demonstrated that the end-constraint effect influences accurate determination of G(12) more adversely than it affects the laminate Young's modulus E(xx) in the low off-axis range. Experimental results obtained from off-axis tests on unidirectional graphite/polyimide specimens confirm the above. Based on the presented analytical and experimental evidence, the 45-deg off-axis coupon is proposed for the determination of the intralaminar shear modulus G(12).

Pindera, M.-J.↗

NASA NTRS1986

Predicting crack growth direction in unidirectional composites

The purpose of this study is to gain a better understanding of the parameters affecting crack growth direction in unidirectional composite materials. To achieve this, the effect of anisotropy and biaxial, far field, loading on the direction of crack growth in unidirectional off-axis composite materials is investigated. Specific emphasis is placed on defining the crack-tip-stress field and finding a consistent criterion for predicting the direction of crack growth. An anisotropic crack-tip-stress analysis was implemented using three criteria (the normal stress ratio theory, the tensor polynomial failure criterion, and the strain energy density theory) to predict the direction of crack extension in unidirectional off-axis graphite-epoxy. The theoretically predicted crack extension directions were then compared with experimental results. It was determined that only the normal stress-ratio criterion correctly predicts the direction of crack extension.

Gregory, M. A.↗

NASA NTRS1986

On fracture of fibrous composites

The problem of an existing through-the-thickness center notch in a unidirectional fibrous composite is investigated using a homogeneous anisotropic elasticity analysis in conjunction with various crack growth criteria. Tensor polynomial, strain energy density, and normal stress ratio criteria are applied as crack growth direction criteria and compared to experimental observations. For the cases and criteria studied, only the normal stress ratio criterion exhibits an ability to correctly predict crack growth direction. The normal stress ratio criterion is subsequently applied to the same cases as a failure criterion. Comparison with experiment indicates that these predictions exhibit reasonable correlation with observed critical stresses. Finally, the macroscopic approach to the problem used in this study is compared to a microscopic shear lag analysis of experimental results in the literature. The comparison indicates that both approaches yield essentially identical predictions. The comparisons made with other criteria and approaches indicate that application of the normal stress ratio within a macroscopic level analysis has great potential as an approach to modeling composite crack growth.

Beuth, J. L., Jr.↗

NASA NTRS1985

Free edge strain concentrations in real composite laminates Experimental-theoretical correlation

The magnitude of the maximum shear strain at the free edge of axially loaded theta (2)/theta(2)(s) and (+ or - theta(2) (s) composite laminates was investigated experimentally and numerically to ascertain the actual value of strain concentration in resin matrix laminates and to determine the accuracy of finite element results. Experimental results using moire interferometry show large, but finite, shear strain concentrations at the free edge of graphite-epoxy and graphite-polyimide laminates. Comparison of the experimental results with those obtained using several different finite element representations showed that a four node isoparametric finite element provided the best and most trouble free numerical results. The results indicate that the ratio of maximum shear strain at the free edge to applied axial strain varies with fiber orientation and does not exceed nine for the most critical angle which is 15 deg.

Herakovich, C. T.↗

NASA NTRS1985

A normal stress criterion for crack extension direction in orthotropic composite materials

A criterion for predicting the direction of crack extension in orthotropic composite materials is presented. The criterion is based upon the normal stress and the anisotropic tensile strength on arbitrary planes about the tip of a crack. Results are obtained, via finite element solutions, for: (1) isotropic mixed mode fracture, (2) cracks in unidirectional off-axis slotted composite tensile coupons and (3) cracks in cross plied laminates. Comparisons are made with other theories and experimental results.

Buczek, M. B.↗

NASA NTRS1985

Fracture morphology of 2-D carbon-carbon composition

Out-of-plane tensile tests of a woven fabric carbon-carbon composite were performed in a scanning electron microscope equipped with a tensile stage and a videotape recording system. The composite was prepared from T-300 8-harness satin graphite fabric and a phenolic resin. The (0/90/0/90/0 sub 1/2) sub 2 laminate, with a Theta describing the orientation of the warp fibers of the fabric, was cured at 160 C and pyrolized at 871 C. This was followed by four cycles of resin impregnation, curing, and pyrolysis. A micrograph of the cross section of the composite is presented. Inspection of the specimen fracture surface revealed that the filaments had no residual matrix bonded to them. Further inspection revealed that the fracture was interlaminar in nature. Failure occurred where filaments of adjacent plies had the same orientation. Thus it is postulated that improvement in transverse tensile strength of 2-D carbon-carbon depends on the improvement of the filament-matrix bond strength.

Avery, W. B.↗

NASA NTRS1985

Orthotropic fracture using a singular isoparametric element

The six noded quarter point natural isoparametric triangular element is employed to obtain displacement and stress distributions in the vicinity of the crack tip in a center cracked tensile coupon of unidirectional graphite epoxy. The material is considered to be homogeneous, elastic and orthotropic. The finite element results are compared to the analytical solution of anisotropic elasticity. Convergence as a function of mesh parameters is studied for isotropic and orthotropic materials. It is shown that displacements converge faster than stresses and that meshes which are convergent for isotropic and orthotropic materials. It is shown that displacements converge faster than stresses and that meshes which are convergent for isotropic materials are not completely convergent for the highly orthotropic graphite epoxy.

Gregory, M. A.↗

NASA NTRS1985

Crack growth in unidirectional graphite-epoxy under biaxial loading

An anisotropic elasticity crack tip stress analysis is implemented using three crack extension direction criteria (the normal stress ratio, the tensor polynominal and the strain energy density) to predict the direction of crack extension in unidirectional of axis graphite-epoxy. The theoretical predictions of crack extension direction are then compared with experimental results for 15 deg off axis tensile coupons with center cracks. Specimens of various aspect ratios and crack orientations are analyzed. It is shown that only the normal stress ratio criterion predicts the correct direction of crack growth.

Beuth, J. L., Jr.↗

NASA NTRS1985

Crack growth direction in unidirectional off-axis graphite-epoxy

An anisotropic elasticity crack tip stress analysis is implemented using three crack extension direction criteria (the normal stress ratio, the tensor polynominal and the strain energy density) to predict the direction of crack extension in unidirectional off axis graphite-epoxy. The theoretical predictions of crack extension direction are then compared with experimental results for 15 deg off axis tensile coupons with center cracks. Specimens of various aspect ratios and crack orientations are analyzed. It is shown that only the normal stress ratio criterion predicts the correct direction of crack growth.

Herakovich, C. T.↗

NASA NTRS1984

Crack growth direction in unidirectional off-axis graphite epoxy

An anisotropic elasticity crack tip stress analysis is implemented using three crack extension direction criteria (the normal stress ratio, the tensor polynominal and the strain energy density) to predict the direction of crack extension in unidirectional off axis graphite-epoxy. The theoretical predictions of crack extension direction are then compared with experimental results for 15 deg off axis tensile coupons with center cracks. Specimens of various aspect ratios and crack orientations are analyzed. It is shown that only the normal stress ratio criterion predicts the correct direction of crack growth.

Herakovich, C. T.↗

NASA NTRS1984

An elastic potential for the nonlinear response of unidirectional graphite composites

An elastic potential is proposed that is capable of modeling the reversible portion of the observed nonlinear response of unidirectional graphite fiber composites. The model includes both the stiffening stress-strain behavior as well as the softening Poisson's response for loading in the fiber direction. The model is compared with experimental results for Celion 6000/PMR-15 graphite-polyimide.

Pindera, M.-J.↗

NASA NTRS1984

Composite laminates with negative through-the-thickness Poisson's ratios

A simple analysis using two-dimensional lamination theory combined with the appropriate three-dimensional anisotropic constitutive equation is presented to show some rather surprising results for the range of values of the through-the-thickness effective Poisson's ratio nu sub xz for angle ply laminates. Results for graphite-epoxy show that the through-the-thickness effective Poisson's ratio can range from a high of 0.49 for a 90 laminate to a low of -0.21 for a + or - 25s laminate. It is shown that negative values of nu sub xz are also possible for other laminates.

Herakovich, C. T.↗

NASA NTRS1984

Free edge strain concentrations in real composite laminates: Experimental-theoretical correlation

The magnitude of the maximum shear strain at the free edge of axially loaded theta (2)/-theta(2)(s) and (+ or - theta(2) (s) composite laminates was investigated experimentally and numerically to ascertain the actual value of strain concentration in resin matrix laminates and to determine the accuracy of finite element results. Experimental results using moire interferometry show large, but finite, shear strain concentrations at the free edge of graphite-epoxy and graphite-polyimide laminates. Comparison of the experimental results with those obtained using several different finite element representations showed that a four node isoparametric finite element provided the best and most trouble free numerical results. The results indicate that the ratio of maxium shear strain at the free edge to applied axial strain varies with fiber orientation and does not exceed nine for the most critical angle which is 15 deg.

Herakovich, C. T.↗

NASA NTRS1984

Space Radiation Effects on Graphite-Epoxy Composite Materials

Radiation effects on engineering properties, dimensional stability, and chemistry on state of the art composite systems were characterized. T300/934 graphite-epoxy composite was subjected to 1.0 MeV electron radiation for a total dose of 1.0 x 10(10) rads at a rate of 5.0 x 10(7) rads/hour. This simulates a worst case exposure equivalent to 30 years in space. Mechanical testing was performed on he 4-ply unidirectional laminates over the temperature range of -250 F (116K) to +250 F (394K). A complete set of in-plane tensile elastic and strength properties were obtained (E sub 1, E sub 2, nu sub 12, G sub 12, X sub T, Y sub T, and S). In addition electron microscopy was used to study and analyze the fracture surfaces of all specimens tested. Results indicate that little difference in properties is noted at room temperature, but significant differences are observed at both low and elevated temperatures.

Milkovich, S. M.↗

NASA NTRS1984

Temperature dependence of elastic and strength properties of T300/5208 graphite-epoxy

Experimental results are presented for the elastic and strength properties of T300/5208 graphite-epoxy at room temperature, 116K (-250 F), and 394K (+250 F). Results are presented for unidirectional 0, 90, and 45 degree laminates, and + or - 30, + or - 45, and + or - 60 degree angle-ply laminates. The stress-strain behavior of the 0 and 90 degree laminates is essentially linear for all three temperatures and that the stress-strain behavior of all other laminates is linear at 116K. A second-order curve provides the best fit for the temperature is linear at 116K. A second-order curve provides the best fit for the temperature dependence of the elastic modulus of all laminates and for the principal shear modulus. Poisson's ratio appears to vary linearly with temperature. all moduli decrease with increasing temperature except for E (sub 1) which exhibits a small increase. The strength temperature dependence is also quadratic for all laminates except the 0 degree - laminate which exhibits linear temperature dependence. In many cases the temperature dependence of properties is nearly linear.

Milkovich, S. M.↗

NASA NTRS1984

Influence of damage on the thermal response of graphite-epoxy laminates

A constrained-displacement finite-element approach for studying the influence of transverse cracks and delaminations on the thermal response of laminated composites is presented. Typical results are given in the form of percent-retention curves for the coefficient of thermal expansion as a function of crack density. Cross-ply and quasi-isotropic T300/5208 graphite-epoxy laminates are considered. It is shown that transverse cracks can have a significant influence on the coefficient of thermal expansion, but delaminations located symmetrically about the laminate midplane have no influence on thermal expansion.

Adams, D. S.↗

NASA NTRS1983

CLFE2D: A generalized plane strain finite element program laminated composites subject to mechanical and hygrothermal loading

CLFE2D is a two dimensional generalized plane strain finite element code, using a linear, four node, general quadrilateral, isoparametric element. The program is developed to calculate the displacements, strains, stresses, and strain energy densities in a finite width composite laminate. CLFE2D offers any combination of the following load types: nodal displacements, nodal forces, uniform normal strain, or hygrothermal. The program allows the user to input one set of three dimensional orthotropic material properties. The user can then specify the angle of material principal orientation for each element in the mesh. Output includes displacements, stresses, strains and strain densities at points selected by the user. An option is also available to plot the underformed and deformed finite element meshes.

Buczek, M. B.↗