Search NASA⌕ Search

Engineering topics

Hermans, Ive

Publications and source records attributed to Hermans, Ive.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The Aqueous and Acetonitrile Bond Dissociation Free Energies of N -Hydroxyphthalimide

Widely cited values of 89 and 90.9 kcal/mol for the bond-dissociation free energy of N-hydroxyphthalimide (NHPI) in water and acetonitrile, respectively, are in error. The sources of the errors leading to these values have been explored and corrected. Here, the corrected values are confirmed through new experiments in aqueous and acetonitrile media and are found to be 84.4 ± 0.1 and 80.04 ± 0.06 kcal/mol, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exploring the Impact of Active Site Structure on the Conversion of Methane to Methanol in Cu‐Exchanged Zeolites

Abstract In the past, Cu‐oxo or ‐hydroxy clusters hosted in zeolites have been suggested to enable the selective conversion of methane to methanol, but the impact of the active site's stoichiometry and structure on methanol production is still poorly understood. Herein, we apply theoretical modeling in conjunction with experiments to study the impact of these two factors on partial methane oxidation in the Cu‐exchanged zeolite SSZ‐13. Phase diagrams developed from first‐principles suggest that Cu‐hydroxy or Cu‐oxo dimers are stabilized when O 2 or N 2 O are used to activate the catalyst, respectively. We confirm these predictions experimentally and determine that in a stepwise conversion process, Cu‐oxo dimers can convert twice as much methane to methanol compared to Cu‐hydroxyl dimers. Our theoretical models rationalize how Cu‐di‐oxo dimers can convert up to two methane molecules to methanol, while Cu‐di‐hydroxyl dimers can convert only one methane molecule to methanol per catalytic cycle. These findings imply that in Cu clusters, at least one oxo group or two hydroxyl groups are needed to convert one methane molecule to methanol per cycle. This simple structure–activity relationship allows to intuitively understand the potential of small oxygenated or hydroxylated transition metal clusters to convert methane to methanol.

Chemistry↗
DOE OSTI2024

Control over Charge Separation by Imine Structural Isomerization in Covalent Organic Frameworks with Implications on CO 2 Photoreduction

Two-dimensional covalent organic frameworks (COFs) are an emerging class of photocatalytic materials for solar energy conversion. In this work, we report a pair of structurally isomeric COFs with reversed imine bond directions, which leads to drastic differences in their physical properties, photophysical behaviors, and photocatalytic CO 2 reduction performance after incorporating a Re(bpy)(CO) 3 Cl molecular catalyst through bipyridyl units on the COF backbone (Re-COF). Using the combination of ultrafast spectroscopy and theory, we attributed these differences to the polarized nature of the imine bond that imparts a preferential direction to intramolecular charge transfer (ICT) upon photoexcitation, where the bipyridyl unit acts as an electron acceptor in the forward imine case (f-COF) and as an electron donor in the reverse imine case (r-COF). These interactions ultimately lead the Re-f-COF isomer to function as an efficient CO 2 reduction photocatalyst, while the Re-r-COF isomer shows minimal photocatalytic activity. Furthermore, these findings not only reveal the essential role linker chemistry plays in COF photophysical and photocatalytic properties but also offer a unique opportunity to design photosensitizers that can selectively direct charges.

14 SOLAR ENERGY↗
DOE OSTI2024

Catalytic conversion of post-consumer recycled high-density polyethylene oil over Zn-impregnated ZSM-5 catalysts

The catalytic conversion of post-consumer recycled high-density polyethylene (PCR-HDPE) pyrolysis oil was investigated using modified ZSM-5 zeolites, prepared under different conditions. The PCR-HDPE oil, obtained through pyrolysis at 500 °C followed by distillation at 165 °C, contained a naphtha fraction hydrocarbons suitable for catalytic upgrading. H/ZSM-5 converts PCR-HDPE naphtha fraction oil primarily into BTX, along with light paraffins and olefins. Introducing mesoporosity led to increased propylene yield at the expense of BTX. Zn impregnation onto H/ZSM-5 and H-meso/ZSM-5 enhanced BTX yield by up to 13 %. However, Zn-meso/ZSM-5 exhibited a lower BTX yield than Zn/ZSM-5 with the same Zn loadings, especially after additional steam treatment at 700 °C. Spent catalysts revealed no noticeable increase in metal contaminants such as calcium and aluminum that were present in the PCR-HDPE. Here, the Zn/ZSM-5 catalyst was stable for more than 50 h time on stream and showed promising potential for upgrading PCR-HDPE naphtha fraction oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tracking Active Phase Behavior on Boron Nitride during the Oxidative Dehydrogenation of Propane Using Operando X-ray Raman Spectroscopy

Hexagonal boron nitride (hBN) is a highly selective catalyst for the oxidative dehydrogenation of propane (ODHP) to propylene. Using a variety of ex situ characterization techniques, the activity of the catalyst has been attributed to the formation of an amorphous boron oxyhydroxide surface layer. The ODHP reaction mechanism proceeds via a combination of surface mediated and gas phase propagated radical reactions with the relative importance of both depending on the surface-to-void-volume ratio. Here we demonstrate the unique capability of operando X-ray Raman spectroscopy (XRS) to investigate the oxyfunctionalization of the catalyst under reaction conditions (1 mm outer diameter reactor, 500 to 550 °C, P = 30 kPa C 3 H 8 , 15 kPa O 2 , 56 kPa He). We probe the effect of a water cofeed on the surface of the activated catalyst and find that water removes boron oxyhydroxide from the surface, resulting in a lower reaction rate when the surface reaction dominates and an enhanced reaction rate when the gas phase contribution dominates. Computational description of the surface transformations at an atomic-level combined with high precision XRS spectra simulations with the OCEAN code rationalize the experimental observations. Finally, this work establishes XRS as a powerful technique for the investigation of light element-containing catalysts under working conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Off-Stoichiometric Restructuring and Sliding Dynamics of Hexagonal Boron Nitride Edges in Conditions of Oxidative Dehydrogenation of Propane

Boron-containing materials, such as hexagonal boron nitride (h-BN), recently shown to be active and selective catalysts for the oxidative dehydrogenation of propane (ODHP), have been shown to undergo significant surface oxyfunctionalization and restructuring. Although experimental ex situ studies have probed the change in chemical environment on the surface, the structural evolution of it under varying reaction conditions has not been established. Herein, we perform global optimization structure search with a grand canonical genetic algorithm to explore the chemical space of off-stoichiometric restructuring of the h-BN surface under ambient as well as ODHP-relevant conditions. A grand canonical ensemble representation of the surface is established, and the predicted 11B solid-state NMR spectra are consistent with previous experimental reports. In addition, we investigated the relative sliding of h-BN sheets and how it influences the surface chemistry with ab initio molecular dynamics simulations. Furthermore, the B–O linkages on the edges are found to be significantly strained during the sliding, causing the metastable sliding configurations to have higher reactivity toward the activation of propane and water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Gas phase ozone-mediated selective oxidative dehydrogenation of alkanes

Improved methods of oxidative dehydrogenation (ODH) of alkanes and alkylbenzenes to the corresponding olefins are disclosed. The disclosed methods use ozone (O 3 ) to mediate the oxidative dehydrogenation reaction with high selectivity for the desired product, and no heterogeneous ODH catalyst is needed.

Hermans, Ive↗
DOE OSTI2022

Catalytic Conversion of Model Compounds of Plastic Pyrolysis Oil over ZSM-5

Mechanistic investigation of the catalytic conversion of model compounds for plastic pyrolysis oil (1-octene, octadiene, octane, and toluene) over ZSM-5 in a fixed-bed reactor was studied. 1-Octene breaks down into smaller olefins, which undergo further cracking, oligomerization, cyclization, and hydrogen transfer to eventually produce benzene, toluene, xylene (BTX), coke, and hydrogen. The effect of contact time on 1-octene conversion was further investigated and compared with thermodynamics analyses to elucidate the reaction network. Under the reaction conditions (500 oC, 1 atm), octadiene undergoes thermal coking, significantly contributing to reactor fouling. The products from octane cracking are similar to the products from 1-octene conversion whereas toluene undergoes disproportionation, dealkylation and coking. The analysis of spent catalyst showed long-chain hydrocarbons created by oligomerization reactions filled the pores and covered the surface of the catalyst. As a result, when mesoporous ZSM-5 is used instead of conventional, product selectivity is maintained for 70 hours in time-on-stream experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Identifying hydroxylated copper dimers in SSZ-13 via UV-vis-NIR spectroscopy

Cu-Exchanged zeolites are promising materials for the selective conversion of methane to methanol. Their activity is attributed to the presence of small Cu-oxo and Cu-hydroxy clusters, but the nature of active centers in various zeolite structures is still under debate. In this contribution, we combine time dependent density functional theory with spin–orbit coupling to predict the optical spectra of various Cu monomers and dimers in SSZ-13. As a result, we furthermore compare theoretical results to experimental measurements and find that the presence of Cu-hydroxy dimers and Cu monomers could potentially explain the experimentally observed UV-vis-NIR spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Reducing Antisolvent Use in the STRAP Process by Enabling a Temperature–Controlled Polymer Dissolution and Precipitation for the Recycling of Multilayer Plastic Films

The recently reported processing strategy called solvent-targeted recovery and precipitation (STRAP) enables deconstruction of multilayer plastic packaging films into their constituent resins by selective dissolution. It uses a series of solvent washes that are guided by thermodynamic calculations of polymer solubility. In this work, the use of antisolvents in the STRAP process was reduced and solvent mixtures were considered to enable the temperature-controlled dissolution and precipitation of the target polymers in multilayer films. This was considered as a means to further improve the STRAP process and its estimated costs. Two STRAP approaches were compared based on different polymer precipitation techniques: precipitation by the addition of an antisolvent (STRAP-A) and precipitation by decreasing the solvent temperature (STRAP-B). Both approaches were able to separate the constituent polymers in a post-industrial film composed primarily of polyethylene (PE), ethylene vinyl alcohol (EVOH), and polyethylene terephthalate (PET) with near 100 % material efficiency. Technoeconomic analysis indicates that the minimum selling price (MSP) of the recycled resins with STRAP-B is 21.0 % lower than that achieved with STRAP-A. This provides evidence that thermally driven polymer precipitation is an option to reduce the use of antisolvents, making the STRAP process more economically and environmentally attractive. A third process, STRAP-C, was demonstrated with another post-industrial multilayer film of a different composition. Here, the results demonstrate that this process can also recover polymers at similar costs to those of virgin resins, indicating that the STRAP technology is flexible and can remain economically competitive as the plastic feed complexity is increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Highly Selective Carbon-Supported Boron for Oxidative Dehydrogenation of Propane

Bulk boron materials, such as hexagonal boron nitride (h-BN), are highly selective catalysts for the oxidative dehydrogenation of propane (ODHP). Previous attempts to improve the productivity of these systems involved the immobilization of boron on silica and resulted in less selective catalysts. Here, we report that acid-treated, activated carbon-supported boron prepared via incipient wetness impregnation with boric acid (B/OAC) exhibits equal propylene selectivity and improved productivity (kg propylene kg cat -1 hr -1 ) as compared to h-BN. Characterization of the fresh and spent catalysts with infrared, Raman, X-ray photoelectron, and solid-state NMR spectroscopies reveals the presence of oxidized/hydrolyzed boron that is clustered on the surface of the support.

03 NATURAL GAS↗
DOE OSTI2021

Assessment and comparison of ordered & non-ordered supported metal oxide catalysts for upgrading propane to propylene

Propylene is an important chemical feedstock that is largely produced via cracking of oil-derived naphtha. Direct conversion of propane into propylene may be a more attractive alternative. Specifically, propane dehydrogenation (DH) and oxidative dehydrogenation (ODH) are promising for this transformation, albeit only DH has been industrially implemented. However, even the best DH catalysts (Pt-based) still suffer from deactivation. VO x - and BO x -based ODH catalysts result in significant over-oxidation and lack a mechanistic understanding. A common challenge in developing these catalysts is the broad distribution of surface species caused by the use of non-ordered catalyst supports. This hampers clear structure-performance correlations. Recent progress in the preparation of well-defined active sites on ordered supports has brought about improved catalysts, as well as fundamental insight into the working mechanism. This review will highlight recent advancements in the development of these catalysts and provide direction on the use of ordered supports for propane upgrading.

03 NATURAL GAS↗