Engineering topics

Herndon, J. N.

Publications and source records attributed to Herndon, J. N..

8 records

NASA NTRS1992

NASA Laboratory Telerobotic Manipulator control system architecture

In support of the National Aeronautics and Space Administration (NASA) goals to increase the utilization of dexterous robotic systems in space, the Oak Ridge National Laboratory (ORNL) has developed the Laboratory Telerobotic Manipulator (LTM) system. It is a dexterous, dual-arm, force reflecting teleoperator system with robotic features for NASA ground-based research. This paper describes the overall control system architecture, including both the hardware and software. The control system is a distributed, modular, and hierarchical design with flexible expansion capabilities for future enhancements of both the hardware and software.

Rowe, J. C.↗

NASA NTRS1991

NASA Laboratory telerobotic manipulator control system architecture

Rowe, J. C.↗

NASA NTRS1990

Design of a telerobotic controller with joint torque sensors

The purpose was to analytically show how to design a joint controller for a telerobotic system when joint torque sensors are available. Other sensors such as actuator position, actuator velocity, joint position, and joint velocity are assumed to be accessible; however, the results will also be useful when only partial measurements are available. The controller presented can be applied to either mode of operation of a manipulator (i.e., teleoperation or robotic). Mechanical manipulators with high levels of friction are assumed. The results are applied to a telerobotic system built for NASA. Very high levels of friction have been reduced using high-gain feedback while avoiding limit cycles.

Jansen, J. F.↗

NASA NTRS1989

The laboratory telerobotic manipulator program

New opportunities for the application of telerobotic systems to enhance human intelligence and dexterity in the hazardous environment of space are presented by the NASA Space Station Program. Because of the need for significant increases in extravehicular activity and the potential increase in hazards associated with space programs, emphasis is being heightened on telerobotic systems research and development. The Laboratory Telerobotic Manipulator (LTM) program is performed to develop and demonstrate ground-based telerobotic manipulator system hardware for research and demonstrations aimed at future NASA applications. The LTM incorporates traction drives, modularity, redundant kinematics, and state-of-the-art hierarchical control techniques to form a basis for merging the diverse technological domains of robust, high-dexterity teleoperations and autonomous robotic operation into common hardware to further NASA's research.

Herndon, J. N.↗

NASA NTRS1989

Robotic control of the seven-degree-of-freedom NASA laboratory telerobotic manipulator

A computationally efficient robotic control scheme for the NASA Laboratory Telerobotic Manipulator (LTM) is presented. This scheme utilizes the redundancy of the seven-degree-of-freedom LTM to avoid joint limits and singularities. An analysis to determine singular configurations is presented. Performance criteria are determined based on the joint limits and singularity analysis. The control scheme is developed in the framework of resolved rate control using the gradient projection method, and it does not require the generalized inverse of the Jacobian. An efficient formulation for determining the joint velocities of the LTM is obtained. This control scheme is well suited for real-time implementation, which is essential if the end-effector trajectory is continuously modified based on sensory feedback. Implementation of this scheme on a Motorola 68020 VME bus-based controller of the LTM is in progress. Simulation results demonstrating the redundancy utilization in the robotic mode are presented.

Dubey, R. V.↗

NASA NTRS1988

Telerobotic manipulator developments for ground-based space research

New opportunities for the application of telerobotic systems to enhance human intelligence and dexterity in the hazardous environment of space are presented by the National Aeronautics and Space Administration (NASA) Space Station Program. Because of the need for significant increases in extravehicular activity and the potential increase in hazards associated with space programs, emphasis is being heightened on telerobotic systems research and development. The Automation Technology Branch at NASA Langley Research Center currently is sponsoring the Laboratory Telerobotic Manipulator (LTM) program at Oak Ridge National Laboratory to develop and demonstrate ground-based telerobotic manipulator system hardware for research and demonstrations aimed at future NASA applications. The LTM incorporates traction drives, modularity, redundant kinematics, and state-of-the-art hierarchical control techniques to form a basis for merging the diverse technological domains of robust, high-dexterity teleoperations and autonomous robotic operation into common hardware to further NASA's research.

Herndon, J. N.↗

NASA NTRS1987

Telerobotic technology for nuclear and space applications

Developments in telerobotics applicable to nuclear and space environments are discussed. The advanced servomanipulator (ASM) slave arm force-reflected servomanipulators designed for modular remote maintainability of the Advanced Integrated Maintenance System is examined. Consideration is given to the master controller, transporter, interface package, operator control station, and the control system for the ASM arm. A prototype of a telerobot capable of performing the activity of an astronaut during EVA is developed. The mechanical and control system features of the telerobot are described.

Herndon, J. N.↗

NASA NTRS1987

Traction-drive telerobot for space manipulation

The National Aeronautics and Space Administration (NASA) Space Station Program marks the begining of a new era in space utilization and habitation. Extensive use of remote manipulation and robotics to reduce astronaut extra-vehicular activity is expected. Emphasis on teleoperator technology in early Space Station phases, followed by growth of autonomous robotics capabilities, is planned. A new telerobot concept has been developed at Oak Ridge National Laboratory (ORNL) under NASA Langley Research Center sponsorship, to address the technical needs of both teleoperations and telerobotics for these future NASA programs. The concept is based on traction drives, redundant kinematics, modular construction, and a state-of-the-art distributed, hierarchical control system.

Herndon, J. N.↗