Search NASA⌕ Search

Engineering topics

Hersam, Mark C

Publications and source records attributed to Hersam, Mark C.

Not Your Normal Power Box

Representing the Center for Electrical Energy Storage (CEES), this document is one of the entries in the Ten Hundred and One Word Challenge and was awarded "Best Science Lesson." As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE: energy. The mission of the CEES is to acquire a fundamental understanding of interfacial phenomena controlling electrochemical processes that will enable dramatic improvements in the properties and performance of energy storage devices, notably Li ion batteries.

25 ENERGY STORAGE↗

Graphene Oxide Interlayers for Robust, High-Efficiency Organic Photovoltaics

Organic photovoltaic (OPV) materials have recently garnered significant attention as enablers of high power conversion efficiency (PCE), low-cost, mechanically flexible solar cells. Nevertheless, further understanding-based materials developments will be required to achieve full commercial viability. In particular, the performance and durability of many current generation OPVs are limited by poorly understood interfacial phenomena. Careful analysis of typical OPV architectures reveals that the standard electron-blocking layer, poly-3,4-ethylenedioxy-thiophene:poly(styrene sulfonate) (PEDOT:PSS), is likely a major factor limiting the device durability and possibly performance. Here we report that a single layer of electronically tuned graphene oxide is an effective replacement for PEDOT:PSS and that it significantly enhances device durability while concurrently templating a performance-optimal active layer {pi}-stacked face-on microstructure. Such OPVs based on graphene oxide exhibit PCEs as high as 7.5% while providing a 5x enhancement in thermal aging lifetime and a 20x enhancement in humid ambient lifetime versus analogous PEDOT:PSS-based devices.

14 SOLAR ENERGY↗

Separation of carbon nanotubes in density gradients

The separation of single-walled carbon nanotubes (SWNTs), by chirality and/or diameter, using centrifugation of compositions of SWNTs in and surface active components in density gradient media.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Large-scale, nonsubtractive patterning of transparent conducting oxides by ion bombardment

While significant progress has been achieved in the fabrication and performance of transparent electronic devices, substantially less research effort has been devoted to transparent interconnects, despite their critical importance for transparent integrated circuitry. Here, we exploit the crystal disorder induced by Ar{sup +} ion bombardment to achieve efficient fabrication of electrically conductive patterns on indium oxide surfaces. The resulting ion-induced patterns are characterized by conductive atomic force microscopy, secondary ion mass spectrometry, and four-point charge transport measurements. Massively parallel patterning is demonstrated over square centimeter areas with a patterned electrical conductivity of {approx}10{sup 4} S cm{sup -1}.

36 MATERIALS SCIENCE↗

Building Conjugated Organic Structures on Si(111) Surfaces via Microwave-Assisted Sonogashira Coupling

A novel step-by-step method employing microwave-assisted Sonogashira coupling is developed to grow fully conjugated organosilicon structures. As the first case study, p-(4-bromophenyl)acetylene is covalently conjugated to a p-(4-iodophenyl)acetylene-derived monolayer on a Si(111) surface. By bridging the two aromatic rings with C {triple_bond} C, the pregrown monolayer is structurally extended outward from the Si surface, forming a fully conjugated (p-(4-bromophenylethynyl)phenyl)vinylene film. The film growth process, which reaches 90% yield after 2 h, is characterized thoroughly at each step by using X-ray reflectivity (XRR), X-ray standing waves (XSW), and X-ray fluorescence (XRF). The high yield and short reaction time offered by microwave-assisted surface Sonogashira coupling chemistry make it a promising strategy for functionalizing Si surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Separation of carbon nanotubes in density gradients

The separation of single-walled carbon nanotubes (SWNTs), by chirality and/or diameter, using centrifugation of compositions of SWNTs in and surface active components in density gradient media.

Hersam, Mark C↗

Phenylacetylene One-Dimensional Nanostructures on the Si(100)-2 1:H Surface

Using ultrahigh vacuum (UHV) scanning tunneling microscopy (STM), many olefins have been shown to self-assemble on the hydrogen-passivated Si(100)-2 1 surface into one-dimensional nanostructures. This paper demonstrates that similar one-dimensional nanostructures can also be realized using alkynes. In particular, UHV STM, sum frequency generation (SFG), and density functional theory (DFT) are employed to study the growth mechanism and binding configuration of phenylacetylene (PA) one-dimensional nanostructures on the Si(100)-2 1:H surface. Molecular-resolution UHV STM images reveal the binding position and spacing of PA with respect to the underlying silicon dimer rows. Furthermore, UHV STM characterization of heteromolecular one-dimensional nanostructures of styrene and PA shows distinct electronic contrast between the two molecules, which is confirmed using simulated STM images derived from DFT and provides insight into the nature of PA binding to silicon. Additional evidence from SFG measurements corroborates the conclusion that the terminal carbon atoms of PA retain -conjugation following reaction to the Si(100)-2 1:H surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Probing Surface-Adlayer Conjugation on Organic-Modified Si(111) Surfaces with Microscopy, Scattering, Spectroscopy, and Density Functional Theory

Highly conjugated molecules bound to silicon are promising candidates for organosilicon electronic devices and sensors. In this study, 1-bromo-4-ethynylbenzene was synthesized and reacted with a hydrogen-passivated Si(111) surface via ultraviolet irradiation. Through an array of characterization and modeling tools, the binding configuration and morphology of the reacted molecule were thoroughly analyzed. Atomic force microscopy confirmed an atomically flat surface morphology following reaction, while X-ray photoelectron spectroscopy verified reaction to the surface via the terminal alkyne moiety. In addition, synchrotron X-ray characterization, including X-ray reflectivity, X-ray fluorescence, and X-ray standing wave measurements, enabled sub-angstrom determination of the position of the bromine atom with respect to the silicon lattice. This structural characterization was quantitatively compared with density functional theory (DFT) calculations, thus enabling the {pi}-conjugation of the terminal carbon atoms to be deduced. The X-ray and DFT results were additionally corroborated with the vibrational spectrum of the organic adlayer, which was measured with sum frequency generation. Overall, these results illustrate that the terminal carbon atoms in 1-bromo-4-ethynylbenzene adlayers on Si(111) retain {pi}-conjugation, thus revealing alkyne molecules as promising candidates for organosilicon electronics and sensing.

43 PARTICLE ACCELERATORS↗