Search NASA⌕ Search

Engineering topics

Heus, Thijs

Publications and source records attributed to Heus, Thijs.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Observed Temperature and Moisture Advection Characteristics in the Southern Great Plains

Until recently, advection profiles in the planetary boundary layer have been difficult to quantify from observations. As a result, not much is known about its basic characteristics, like magnitude and diurnal cycles, or how these differ as a function of large-scale environments. Here, to provide insight into advective characteristics, a Green’s Theorem–based method for calculating profiles of advection in the lowest 3 km from an array of ground-based thermodynamic and kinematic profiling instruments has been applied to 2 years of observations from the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) observing site. Since advection largely depends on synoptic-scale forcing, a self-organizing map (SOM) was used to classify days based on mean sea level pressure analyses; from that, the diurnal evolution of vertical profiles of advection for different synoptic environments was quantified. The overall mean magnitude of the potential temperature advection is approximately ±3 K h −1 , while the moisture advection is approximately ±1.5 g kg −1 h −1 , with substantial variability in the sign and magnitude of the advective tendencies at different heights and throughout the diurnal cycle. Advection magnitude is strongly connected to the strength of synoptic-scale forcing, which varies depending on the time of year. Variability in advection is larger for potential temperature than it is for moisture, and strongly forced environments, like midlatitude cyclones, feature greater variability in the advection magnitude than weakly forced or quiescent environments.

advection↗
DOE OSTI2024

Characterizing Land-Atmosphere Interactions During the Afternoon-to-Evening Transition Using ARM SGP Observations

The land-atmosphere (LA) system consists of the soil, vegetation, and lowest layer of the atmosphere. The energy and water transport processes in this system contribute to the structure and the daily cycle of the atmospheric boundary layer (ABL), which is the layer between the land surface and the free troposphere that controls the exchange of momentum, energy, and water. The state of the ABL is the result of complex two-way interactions between local processes such as surface fluxes and entrainment at the ABL top as well as large-scale and mesoscale processes such as advection and subsidence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Department of Energy’s Atmospheric System Research (ASR) Program’s Workshop on the Future of Atmospheric Large Eddy Simulation (LES): Workshop Report

Large-eddy simulation (LES) is used as a tool to understand physical processes such as turbulence, aerosols, clouds, precipitation, radiation, the interactions among all these, and their interactions with the underlying surface. Over the next 10 years, LES will drive fundamental progress in open scientific questions in these areas as LES is increasingly used to gain understanding of complex interacting physical processes involving atmospheric turbulence. This growth will be driven both by scientific demand and the expansion of computational resources needed to conduct LES, and the form that the growth takes will largely be determined by how computational resources are leveraged for scientific gain. In particular, we suggest that computational resources are likely to be leveraged in two separate but not necessarily distinct ways. On one hand, growth in computational resources will allow LES to be made more routine, that is, performed more frequently, while on the other hand, the computational expense (measured in total floating point operations) afforded to individual LES will expand dramatically, allowing simulations to increase in both domain size and resolution as well as physical detail. Current U.S. Department of Energy (DOE) projects such as LES ARM Symbiotic Simulation and Observation Activity (LASSO) are leading the way in conducting routine LES, building large, public databases that are accessible for data science, sensitivity studies, and training for machine learning. LES will also become more routine as it becomes more accessible for individual researchers to address their scientific questions of interest. Scientific questions addressed by LES over the next 10 years are likely to include cloud organization and aggregation; aerosol cloud interactions and atmospheric chemistry (including geo-engineering); urban-scale LES; atmospheric extreme events, ranging from small-scale severe weather to wildfires; and ocean-wave-atmosphere interactions. Further LES-related research will likely grow significantly in areas related to societal impact studies of air quality and extreme weather events, applications to renewable energy forecasting and resource assessment, and aid in decision-making processes. The growth in the use of LES in atmospheric science research will drive the need for better physical process representations (e.g., cloud aerosol microphysics, radiation, and atmospheric chemistry) at the scales resolved by LES. To date, many of the process representations used by LES have been taken directly from coarser-resolution models. Promising methods for LES process representations include superdroplet and quadrature methods for microphysics, 3D approaches for radiation, and better representation of chemistry and aerosol processes. At LES resolution, land-atmosphere interactions for complex terrains, land cover/types, biogeochemistry, and plant canopy models are needed as an improvement beyond traditional and widely used Monin-Obuhkov similarity theory.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Department of Energy’s Atmospheric System Research (ASR) Program’s Workshop on the Future of Atmospheric Large Eddy Simulation (LES) (Workshop Report)

Large-eddy simulation (LES) is used as a tool to understand physical processes such as turbulence, aerosols, clouds, precipitation, radiation, the interactions among all these, and their interactions with the underlying surface. Over the next 10 years, LES will drive fundamental progress in open scientific questions in these areas as LES is increasingly used to gain understanding of complex interacting physical processes involving atmospheric turbulence. This growth will be driven both by scientific demand and the expansion of computational resources needed to conduct LES, and the form that the growth takes will largely be determined by how computational resources are leveraged for scientific gain. In particular, we suggest that computational resources are likely to be leveraged in two separate but not necessarily distinct ways. On one hand, growth in computational resources will allow LES to be made more routine, that is, performed more frequently, while on the other hand, the computational expense (measured in total floating point operations) afforded to individual LES will expand dramatically, allowing simulations to increase in both domain size and resolution as well as physical detail.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Science Plan for the Deployment of the Third ARM Mobile Facility to the Southeastern United States at the Bankhead National Forest, Alabama (AMF3 BNF)

In 2018, the U.S. Department of Energy (DOE) held a workshop for the Atmospheric Radiation Measurement (ARM) (Mather and Voyles 2013) user facility to discuss critical climate challenges and locations where key ARM Mobile Facility (AMF) observational assets could impact Earth system modeling (ESM). As an outcome, the southeast United States (SE U.S.) was identified as a high-priority region to target climate-process studies that promote a deeper understanding of the climate system and bolster ARM interactions with the community to drive ESM advancement. The DOE ARM user facility is a globally recognized leader in deploying and operating strategically located observation sites around the world for studying the properties of aerosols and clouds and their interaction with radiation, precipitation, and the Earth’s surface. In partnering with the DOE Atmospheric System Research (ASR) program, ARM solicited a multi-agency Site Science Team approach to provide input and close interaction with ARM management towards a successful SE U.S. deployment of the ARM third Mobile Facility (AMF3) (Miller et al. 2016). These efforts included identifying key locations, science drivers and instruments, and measurement strategies to address the wider climate-process needs and ESM improvement. Community input served a vital role in establishing, refining, and informing the relevant drivers and decisions regarding this AMF3 deployment. The team has identified Northern Alabama (N. AL) as regionally representative to unlock the key opportunities that will improve our understanding and model representation of aerosol, cloud, and land-surface processes and their couplings in the SE U.S. A defining aspect of the AMF3 deployment is its commitment to long-term (anticipated five-year) observations to mitigate potential seasonal-to-annual variability that often limits appropriate attribution of phenomena to local or larger-scale processes. The proposed location may leverage nearby surface networks and multi-agency and partner assets to enrich this multi-year deployment. One motivation is to understand the role of spatiotemporal variability (thermodynamic, land-surface) across aspects of the climate system, with our AMF3 team anticipating future demands on characterizing the relationships between local-to-regional cloud development and surface processes across a diverse patchwork of natural, managed, and urban landscapes as found throughout the N. AL regions. The main site targets an intact, representative, forested region – the Bankhead National Forest (BNF) – underscoring further team commitment to regionally important land-atmosphere two-way interactive studies “from the canopy to the clouds”, with enhanced tower instrumentation augmenting traditional ARM capabilities adjacent to this site. Multiple supplemental sites will also be distributed across this region, prioritizing added needs for biodiversity. Anticipated high-priority cloud science themes will target N. AL as a regional SE U.S. hotbed for high-impact weather, convective cloud onset, and shallow-to-deep cloud transitioning. Anticipated aerosol drivers will focus on chemical processes that control the evolution of organic aerosol, the seasonality and spatial distribution of water vapor and particle-phase water, and its role on aerosol optical properties. Anticipated land-atmosphere drivers consider the two-way feedbacks between surface influence on aerosols, clouds, and precipitation properties and the associated radiative impacts on plant physiology and canopy-scale fluxes. Emphasis will include the study of the impact of surface processes on aerosols via precursor emission, and on clouds via moisture flux and thermal development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Department of Energy’s Atmospheric System Research (ASR) Program’s Workshop on the Future of Atmospheric Large Eddy Simulation (LES) (Workshop Report)

Large-eddy simulation (LES) is used as a tool to understand physical processes such as turbulence, aerosols, clouds, precipitation, radiation, the interactions among all these, and their interactions with the underlying surface. Over the next 10 years, LES will drive fundamental progress in open scientific questions in these areas as LES is increasingly used to gain understanding of complex interacting physical processes involving atmospheric turbulence. This growth will be driven both by scientific demand and the expansion of computational resources needed to conduct LES, and the form that the growth takes will largely be determined by how computational resources are leveraged for scientific gain. In particular, we suggest that computational resources are likely to be leveraged in two separate but not necessarily distinct ways. On one hand, growth in computational resources will allow LES to be made more routine, that is, performed more frequently, while on the other hand, the computational expense (measured in total floating point operations) afforded to individual LES will expand dramatically, allowing simulations to increase in both domain size and resolution as well as physical detail. Current U.S. Department of Energy (DOE) projects such as LES ARM Symbiotic Simulation and Observation Activity (LASSO) are leading the way in conducting routine LES, building large, public databases that are accessible for data science, sensitivity studies, and training for machine learning. LES will also become more routine as it becomes more accessible for individual researchers to address their scientific questions of interest. Scientific questions addressed by LES over the next 10 years are likely to include cloud organization and aggregation; aerosol cloud interactions and atmospheric chemistry (including geo-engineering); urban-scale LES; atmospheric extreme events, ranging from small-scale severe weather to wildfires; and ocean-wave-atmosphere interactions. Further LES-related research will likely grow significantly in areas related to societal impact studies of air quality and extreme weather events, applications to renewable energy forecasting and resource assessment, and aid in decision-making processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Science Plan for the Deployment of the Third ARM Mobile Facility to the Southeastern United States at the Bankhead National Forest, Alabama (AMF3 BNF)

In 2018, the U.S. Department of Energy (DOE) held a workshop for the Atmospheric Radiation Measurement (ARM) (Mather and Voyles 2013) user facility to discuss critical climate challenges and locations where key ARM Mobile Facility (AMF) observational assets could impact Earth system modeling (ESM). As an outcome, the southeast United States (SE U.S.) was identified as a high-priority region to target climate-process studies that promote a deeper understanding of the climate system and bolster ARM interactions with the community to drive ESM advancement. The DOE ARM user facility is a globally recognized leader in deploying and operating strategically located observation sites around the world for studying the properties of aerosols and clouds and their interaction with radiation, precipitation, and the Earth’s surface. In partnering with the DOE Atmospheric System Research (ASR) program, ARM solicited a multi-agency Site Science Team approach to provide input and close interaction with ARM management towards a successful SE U.S. deployment of the ARM third Mobile Facility (AMF3) (Miller et al. 2016). These efforts included identifying key locations, science drivers and instruments, and measurement strategies to address the wider climate-process needs and ESM improvement. Community input served a vital role in establishing, refining, and informing the relevant drivers and decisions regarding this AMF3 deployment. The team has identified Northern Alabama (N. AL) as regionally representative to unlock the key opportunities that will improve our understanding and model representation of aerosol, cloud, and land surface processes and their couplings in the SE U.S. A defining aspect of the AMF3 deployment is its commitment to long-term (anticipated five-year) observations to mitigate potential seasonal-to-annual variability that often limits appropriate attribution of phenomena to local or larger-scale processes. The proposed location may leverage nearby surface networks and multi-agency and partner assets to enrich this multi-year deployment. One motivation is to understand the role of spatiotemporal variability (thermodynamic, land-surface) across aspects of the climate system, with our AMF3 team anticipating future demands on characterizing the relationships between local-to-regional cloud development and surface processes across a diverse patchwork of natural, managed, and urban landscapes as found throughout the N. AL regions. The main site targets an intact, representative, forested region – the Bankhead National Forest (BNF) – underscoring further team commitment to regionally important land atmosphere two-way interactive studies “from the canopy to the clouds”, with enhanced tower instrumentation augmenting traditional ARM capabilities adjacent to this site. Multiple supplemental sites will also be distributed across this region, prioritizing added needs for biodiversity. Anticipated high-priority cloud science themes will target N. AL as a regional SE U.S. hotbed for high-impact weather, convective cloud onset, and shallow to-deep cloud transitioning. Anticipated aerosol drivers will focus on chemical processes that control the evolution of organic aerosol, the seasonality and spatial distribution of water vapor and particle-phase water, and its role on aerosol optical properties. Anticipated land atmosphere drivers consider the two-way feedbacks between surface influence on aerosols, clouds, and precipitation properties and the associated radiative impacts on plant physiology and canopy-scale fluxes. Emphasis will include the study of the impact of surface processes on aerosols via precursor emission, and on clouds via moisture flux and thermal development.

Doppler lidar, aerosols, convection↗
DOE OSTI2022

Shallow Cumulus Entrainment Dynamics in a Sheared Environment

Abstract Vertical wind shear has long been known to tilt convective towers and reduce thermal ascent rates. The purpose of this study is to better understand the physical mechanisms responsible for reduced ascent rates in shallow convection. In particular, the study focuses on cloud-edge mass flux to assess how shear impacts mass-flux profiles of both the ensemble and individual clouds of various depths. A compositing algorithm is used to distill large-eddy simulation (LES) output to focus on up- and down-shear cloud edges that are not influenced by complex cloud geometry or nearby clouds. A direct entrainment algorithm is used to estimate the mass flux through the cloud surface. We find that the dynamics on the up- and down-shear sides are fundamentally different, with the entrainment of environmental momentum and dilution of buoyancy being primarily responsible for the reduced down-shear ascent rates. Direct estimates of fluid flow through the cloud interface indicate a counter-shear organized flow pattern that entrains on the down-shear side and detrains on the up-shear side, resulting from the subcloud shear being lifted into the cloud layer by the updraft. In spite of organized regions of entrainment and detrainment, the overall net lateral mass flux remains unchanged with respect to the no shear run, with weak detrainment present throughout cloud depth.

Meteorology & Atmospheric Sciences↗
DOE OSTI2022

Size-Dependent Characteristics of Surface-Rooted Three-Dimensional Convective Objects in Continental Shallow Cumulus Simulations

A segmentation algorithm is applied to high resolution simulations of shallow continental convection to identify individual convective 3D objects within the convective boundary layer, in order to investigate which properties of the objects vary with the object width. The study analyses the geometry of the objects, along with their profiles of vertical velocity and total water, to assess various assumptions often used in spectral mass-flux convection schemes. The methodology of this paper is unique in that we use (a) a novel application of the watershed algorithm to detect individual objects in the constantly evolving continental boundary layer efficiently, and (b) an unprecedentedly large number of simulations being analyzed. In total, 26 days of LASSO simulations at the Atmospheric Radiation Measurement Southern Great Plains site are analyzed, yielding roughly one million objects. Plume-like surface-rooted objects are found to be omnipresent, the vertical extent of which is strongly dependent on the object width. The vertical velocity and moisture anomaly profiles of the widest objects are roughly consistent with the classic buoyancy-driven rising plume model. The kinematic and thermodynamic properties of the objects vary with object width. This width dependence is strongest above cloud base, but much weaker below. Finally the impact of neglecting the contribution of covariances to the vertical moisture flux, which is commonly used in mass-flux parameterizations, is investigated. The average effect of neglecting covariances increases linearly with object width, leading to a 20% flux underestimation for 2 km wide objects. Implications of the results for spectral convection scheme development are briefly discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Observing Profiles of Derived Kinematic Field Quantities Using a Network of Profiling Sites

Abstract Observations of thermodynamic and kinematic parameters associated with derivatives of the thermodynamics and wind fields, namely, advection, vorticity, divergence, and deformation, can be obtained by applying Green’s theorem to a network of observing sites. The five nodes that comprise the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) profiling network, spaced 50–80 km apart, are used to obtain measurements of these parameters over a finite region. To demonstrate the applicability of this technique at this location, it is first applied to gridded model output from the High-Resolution Rapid Refresh (HRRR) numerical weather prediction model, using profiles from the locations of ARM network sites, so that values calculated from this method can be directly compared to finite difference calculations. Good agreement is found between both approaches as well as between the model and values calculated from the observations. Uncertainties for the observations are obtained via a Monte Carlo process in which the profiles are randomly perturbed in accordance with their known error characteristics. The existing size of the ARM network is well suited to capturing these parameters, with strong correlations to model values and smaller uncertainties than a more closely spaced network, yet it is small enough that it avoids the tendency for advection to go to zero over a large area.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Lagrangian Study of Interfaces at the Edges of Cumulus Clouds

Abstract Interfaces at the edge of an idealized, nonprecipitating, warm cloud are studied using direct numerical simulation (DNS) complemented with a Lagrangian particle tracking routine. Once a shell has formed, four zones can be distinguished: the cloud core, visible shell, invisible shell, and the environment. The union of the visible and invisible regions is the shell commonly referred to in literature. The boundary between the invisible shell and the environment is the turbulent–nonturbulent interface (TNTI), which is typically not considered in cloud studies. Three million particles were seeded homogeneously across the domain and properties were recorded along individual trajectories. The results demonstrate that the traditional cloud boundary (separating cloudy and noncloudy regions using thresholds applied on liquid condensate or updraft velocity) are some distance away from the TNTI. Furthermore, there is no dynamic difference between the traditional liquid-condensate boundary and the region extending to the TNTI. However, particles crossing the TNTI exhibit a sharp jump in enstrophy and a smooth increase in buoyancy. The traditional cloud boundary coincides with the location of minimum buoyancy in the shell. The shell premixes the entraining and detraining air and analysis reveals a highly skewed picture of entrainment and detrainment at the traditional cloud boundary. A preferential entrainment of particles with velocity and specific humidity higher than the mean values in the shell is observed. Large-eddy simulation of a more realistic setup detects an interface with similar properties using the same thresholds as in the DNS, indicating that the DNS results extrapolate beyond their idealized conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Effects of Surface and Top Wind Shear on the Spatial Organization of Marine Stratocumulus-Topped Boundary Layers

Typically, the convective nature of Stratocumulus topped boundary layers (STBL) involves the motion of updrafts and downdrafts, driven by surface fluxes and radiative cooling, respectively. The balance between shear and buoyant forcings at the surface can determine the organization of updrafts between cellular and roll structures. We investigate the effect of varying shear at the surface and top of the STBL using Large Eddy Simulations, taking DYCOMS II RF01 as a base case. We focus on spatial identification of the following features: coherent updrafts and downdrafts, and observe how they are affected by varying shear. Stronger surface shear organizes the updrafts in rolls, causes less well-mixed thermodynamic profiles, and decreases cloud fraction and liquid water path (LWP). Stronger top shear also decreases cloud fraction and LWP more than surface shear, by thinning the cloud from the top. Features with stronger top than surface shear are associated with a net downward momentum transport and show early signs of decoupling. Classifying updrafts and downdrafts based on their vertical span and horizontal size confirms the dominance of tall objects spanning the whole STBL. Tall objects occupy 30% of the volume in the STBL, while short ones occupy less than 1%. For updraft and downdraft fluxes, these tall objects explain 65% of the vertical velocity variance and 83% of the buoyancy flux, on average. Stronger top shear also weakens the contribution of downdrafts to the turbulent fluxes and tilts the otherwise vertical development of updrafts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The Contributions of Shear and Turbulence to Cloud Overlap for Cumulus Clouds

The causes of vertical cloud overlap, the ratio between the cloud fraction by area and the cloud fraction by volume, are studied for fields of cumulus convection. Using large-eddy simulations, the structure of individual clouds within the cloud field is inspected and connected to the overall cloud cover of the entire cloud field. First, it is shown that the cloud overlap of the entire field can be well approximated by the total cloud overlap of the individual clouds. It is then shown that a simple maximum overlap assumption, which is commonly used for cloud fields with small layer depth, can only account for roughly half of the overlap inefficiency. This is due to the fact that maximum overlap only represents variations in cloud width as a function of depth but does not take other factors into account, most notably shear or turbulence. The effects of turbulence and wind shear on the overlap of individual clouds are first estimated as a function of cloud depth, which closes the discrepancy between observed cloud overlap and the maximum overlap assumption. Then, an empirical model is developed for the shear and turbulence contributions on overlap as a function of cloud depth and of synoptic conditions. Finally, it is shown that our model is capable of accurately predicting overlap for a large number of cloud fields and under a variety of meteorological conditions.

54 ENVIRONMENTAL SCIENCES↗