Search NASA⌕ Search

Engineering topics

Hickey, Robert J.

Publications and source records attributed to Hickey, Robert J..

4 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Revealing Deformation Mechanisms in Polymer-Grafted Thermoplastic Elastomers via In Situ Small-Angle X-ray Scattering

The tunable properties of thermoplastic elastomers (TPEs), through polymer chemistry manipulations, enable these technologically critical materials to be employed in a broad range of applications. The need to “dial-in” the mechanical properties and responses of TPEs generally requires the design and synthesis of new macromolecules. In these designs, TPEs with nonlinear macromolecular architectures outperform the mechanical properties of their linear copolymer counterparts, but the differences in the deformation mechanism providing enhanced performance are unknown. Here, in situ small-angle X-ray scattering (SAXS) measurements during uniaxial extension reveal distinct deformation mechanisms between a commercially available linear poly(styrene)–poly(butadiene)–poly(styrene) (SBS) triblock copolymer and the grafted SBS version containing grafted poly(styrene) (PS) chains from the poly(butadiene) (PBD) midblock. The neat SBS (φ SBS = 100%) sample deforms congruently with the macroscopic dimensions, with the domain spacing between spheres increasing and decreasing along and transverse to the stretch direction, respectively. At high extensions, end segment pullout from the PS-rich domains is detected, which is indicated by a disordering of SBS. Conversely, the PS-grafted SBS that is 30 vol % SBS and 70% styrene (φ SBS = 30%) exhibits a lamellar morphology, and in situ SAXS measurements reveal an unexpected deformation mechanism. During deformation, there are two simultaneous processes: significant lamellar domain rearrangement to preferentially orient the lamellae planes parallel to the stretch direction and crazing. The samples whiten at high strains as expected for crazing, which corresponds with the emergence of features in the 2D SAXS pattern during stretching consistent with fibril-like structures that bridge the voids in crazes. The significant domain rearrangement in the grafted copolymers is attributed to the new junctions formed across multiple PS domains by the grafting of a single chain. In conclusion, the in situ SAXS measurements provide insights into the enhanced mechanical properties of grafted copolymers that arise through improved physical cross-linking that leads to nanostructure domain reorientation for self-reinforcement and craze formation where fibrils help to strengthen the polymer.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anion chemical composition of poly(ethylene oxide)-based sulfonylimide and sulfonate lithium ionomers controls ion aggregation and conduction

Maximizing ion conduction in single-ion-conducting ionomers is essential for their application in energy-related technologies such as Li-ion batteries. Understanding the anion chemical composition impacts on ion conduction offers new perspectives to maximize ion transport, since the current approach of lowering T g has apparently reached a limit (lowest T g ~ 190 K, highest conductivity ~10 -5 –10 -4 S cm -1 ). Here, a series of random ionomers are synthesized by copolymerizing poly(ethylene glycol)methacrylate with either sulfonylimide lithium methacrylate (MTLi) or sulfonate lithium methacrylate (MSLi) using reversible addition–fragmentation chain transfer (RAFT) polymerization. Li-Ion conduction and self-diffusion coefficients (DLi+) of the ionomers are characterized with dielectric relaxation spectroscopy (DRS) and pulsed-field-gradient (PFG) NMR diffusometry, respectively. Increasing ion content decreases the Li-ion conductivity and D Li+ , as expected from the increased T g . Moreover, a considerably lower ionic conductivity and D Li+ are observed for MSLi compared to MTLi at constant ion content and T g /T. As revealed from X-ray scattering, strong ion aggregation in MSLi results in much lower conductivity and DLi+ compared with less aggregated MTLi based on the more delocalized sulfonylimide anion. These results emphasize the detrimental and molecularly specific role of ion aggregation in Li-ion conductivity, and highlight the necessity for minimizing ion aggregation via the rational choice of anion chemical composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of chemical substituents attached to the zwitterion cation on dielectric constant

Materials with high dielectric constant, ε s , are desirable in a wide range of applications including energy storage and actuators. Recently, zwitterionic liquids have been reported to have the largest ε s of any liquid and, thus, have the potential to replace inorganic fillers to modulate the material ε s . Although the large ε s for zwitterionic liquids is attributed to their large molecular dipole, the role of chemical substituents attached to the zwitterion cation on ε s is not fully understood, which is necessary to enhance the performance of soft energy materials. Here, we report the impact of zwitterionic liquid cation chemical substituents on ε s (50 < ε s < 300 at room temperature). Dielectric relaxation spectroscopy reveals that molecular reorientation is the main contributor to the high ε s . The low Kirkwood factor g calculated for zwitterionic liquids (e.g., 0.1–0.2) suggests the tendency for the antiparallel zwitterion dipole alignment expected from the strong electrostatic intermolecular interactions. With octyl cation substituents, the g is decreased due to the formation of hydrophobic-rich domains that restrict molecular reorientation under applied electric fields. In contrast, when zwitterion cations are functionalized with ethylene oxide (EO) segments, g increases due to the EO segments interacting with the cations, allowing more zwitterion rotation in response to the applied field. The reported results suggest that high ε s zwitterionic liquids require a large molecular dipole, compositionally homogeneous liquids (e.g., no aggregation), a maximized zwitterion number density, and a high g, which is achievable by incorporating polar chemical substituents onto the zwitterion cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗