Search NASA⌕ Search

Engineering topics

Hiesinger, H.

Publications and source records attributed to Hiesinger, H..

A Fresh Look at the Stratigraphy of Northern Australe

The roughly circular collection of mare deposits centered at ~38.9°S, 93°E is often re- ferred to as Mare Australe. It is located outside of the Procellarum KREEP Terrain. The circular arrangement of Australe’s mare patches has suggested an ancient, heavily degraded or relaxed impact basin roughly 900 km in diameter. The mare deposits are generally thought to have erupted into smaller post- basin craters. The type, volume, and distribution of mare eruptions potentially resembles the early stages of basin-filling mare events, but which are preserved in Australe and some farside locations. Gravity data suggest that if there was a basin, it is much smaller than originally proposed (now ~600 km) and located in the northern part of Mare Australe, between Humboldt, Milne, and Jenner craters. As a whole, Mare Australe lacks the topography typically associated with a basin; however, northern Australe has a slight topographic depression that roughly corresponds to the basin-like Bouguer gravity signature in the same area. The compositions exposed in Humboldt crater suggest that a preexisting basin might have excavated deeper crustal material. However, the underlying cause of the circularity of Mare Australe’s deposits, particularly those extending outside of the potential impact basin setting, is not yet understood. Thus, Australe may preserve fundamental information about mare volcanism potentially uncoupled from basin formation and structure. The objectives of this study are to use new high- resolution data (images, gravity, topography, and com- position) to reassess Australe’s mare deposits, deter- mine the timing and style of volcanism, identify discrete basalt deposits, and to further characterize the evolution of magmatism and subsurface structure in this area. Here, we focus on the northern Australe deposits (between Humboldt, Jenner, and Milne). As originally noted by Whitford-Stark (1979), Humboldt crater and its ejecta make an excellent stratigraphic marker that can be traced across much of the Australe region. The ejecta serves as a stratigraphic constraint for absolute model ages (AMAs) derived from crater size-frequency distributions (CSFDs).

Stopar, J. D.↗

Re-examination of the Population, Stratigraphy, and Sequence of Mercurian Basins: Implications for Mercury’s Early Impact History and Comparison with the Moon

Mercury has one of the best preserved impact records in the inner Solar System due to the absence of an atmosphere, but it has much higher rates of surface modification than on the Moon. The earliest geological mapping of the planet revealed a variety of important differences from the Moon, regarding the impact basin (D ≥ 300 km) and cratering record, as well as the extensive volcanic plains of Mercury [1-3]. It has been shown [3] that the bombardment history of the terrestrial planets is lunar-like and linked in terms of impactor population(s) and impact rates. Recent studies suggest that Mercury and the Moon had the same early impactor populations based on the similarity of their crater size-frequency distributions (CSFD), however the impact rates on Mercury are higher than on the Moon. Catalogued and characterized the basin population on Mercury using early optical data obtained by the MESSENGER spacecraft and found 46 certain and probable impact basins, as well as 41 tentative.

Orgel, C.↗

Constraining Solar System Bombardment Using In Situ Radiometric Dating

The leading, but contentious, model for lunar impact history includes a pronounced increase in impact events at around 3.9 Ga. This late heavy bombardment would have scarred Mars and the terrestrial planets, influenced the course of biologic evolution on the early Earth, and rearranged the very architecture of our Solar System. But what if it's not true? In the last decade, new observations and sample analyses have reinterpreted basin ages and "pulled the pin" on the cataclysm - we may only have the age of one large basin (Imbrium). The Curie mission would constrain the onset of the cataclysm by determining the age of a major pre-Imbrium lunar basin (Nectaris or Crisium), characterize new lunar lithologies far from the Apollo and Luna landing sites, including the basalts in the basin-filling maria and olivine-rich lithologies in the basin margins, and provide a unique vantage point to assess volatiles in the lunar regolith from dawn to dusk.

Cohen, Barbara A.↗

Young Lunar Volcanism: Irregular Mae Patches as Drained Lava Ponds and Inflated Flows

Irregular mare patches (IMPs) were previously proposed as sites of young lunar volcanism and/or endogenic activity [1-3], raising the possibility that volcanism on the Moon may not have ended approximately 1 Ga as determined from surface ages [4]. The wide-spread occurrence of more than 70 IMPs on the lunar nearside suggests a correlation with Th-rich PKT regions and a basaltic composition [1,2]. IMPs exhibit at least two types of deposit morphologies: (a) dome-like, steep-sided and smooth mounds and (b) low-relief ropy (LRR) to hummocky (LRH) materials (Fig. 1). Morphologic indicators such as steep (>40 deg) margin slopes across distances <10 m and crisp boundaries imply ages less than a few 100 Ma [e.g.,1-3]. The IMPs also have relatively few superposed craters >10 m in diameter, and young absolute model ages, which when combined with their superposition on young crater deposits like the continuous ejecta of Aristarchus crater, imply ages approximately 10 Ma to 100 Ma [1,2]. However, the mounds do not exhibit blocky crater morphologies, nor fracturing typical of young volcanic deposits, and the mound texture resembles that of mature regolith [e.g., 2,5], implying a much older age (approximately 3.5 Ga). These contrasting indicators have led to the proposal of widely varying formation mechanisms that range from ancient volcanism modified by recent tectonism [6] or outgassing [3,7], ancient volcanism of atypical materials [8], to Copernican-era volcanism [1,2].

Stopar, J. D.↗

Remote Sensing and Geologic Studies of Mare Australe: The North Australe Region

A key goal of the Lunar Reconnaissance Orbiter (LRO) mission is to investigate volcanic processes at different temporal and physical scales, with one emphasis being the characterization of ancient (meaning, greater than 3.9 Ga) volcanic units. One such ancient volcanic terrain is Mare Australe, a loosely-circular collection of mare basalts centered at approximately 38.9 deg S, 93 deg E (Fig. 1). Mare Australe is a complex, extensive, and poorly understood volcanic region.

Lawrence, S. J.↗

The Miniature Radio Frequency Instruments (Mini-RF) Global Observations of Earth's Moon

Radar provides a unique means to analyze the surface and subsurface physical properties of geologic deposits, including their wavelength-scale roughness, the relative depth of the deposits, and some limited compositional information. The NASA Lunar Reconnaissance Orbiter's (LRO) Miniature Radio Frequency (Mini-RF) instrument has enabled these analyses on the Moon at a global scale. Mini-RF has accumulated 67% coverage of the lunar surface in S-band (12.6 cm) radar with a resolution of 30 m/pixel. Here we present new Mini-RF global orthorectified uncontrolled S-band maps of the Moon and use them for analysis of lunar surface physical properties. Reported here are readily apparent global- and regional-scale differences in lunar surface physical properties that suggest three distinct terranes, namely: a (1) Nearside Radar Dark Region; (2) Orientale basin and continuous ejecta; and the (3) Highlands Radar Bright Region. Integrating these observations with new data from LRO's Diviner Radiometer rock abundance maps, as well Clementine and Lunar Prospector derived compositional values show multiple distinct lunar surface terranes and sub-terranes based upon both physical and compositional surface properties. Previous geochemical investigations of the Moon suggested its crust is best divided into three to four basic crustal provinces or terranes (Feldspathic Highlands Terrane (-An and -Outer), Procellarum KREEP Terrane, and South Pole Aitken Terrane) that are distinct from one another. However, integration of these geochemical data sets with new geophysical data sets allows us to refine these terranes. The result shows a more complex view of these same crustal provinces and provides valuable scientific and hazard perspectives for future targeted human and robotic exploration.

Radar observations↗

Vesta Evolution from Surface Mineralogy: Mafic and Ultramafic Mineral Distribution

Vesta is the only intact, differentiated, rocky protoplanet and it is the parent body of HED meterorites. Howardite, eucrite and diogenite (HED) meteorites represent regolith, basaltic-crust, lower-crust and possibly ultramafic-mantle samples of asteroid Vesta. Only a few of these meteorites, the orthopyroxene-rich diogenites, contain olivine, a mineral that is a major component of the mantles of differentiated bodies, including Vesta. The HED parent body experienced complex igneous processes that are not yet fully understood and olivine and diogenite distribution is a key measurement to understand Vesta evolution. Here we report on the distribution of olivine and its constraints on vestan evolution models.

DeSanctis, M. C.↗

Mineralogical Composition of the Different Types of Bright Deposits on Vesta

VIR-MS, Dawn's Visible and Infrared Mapping Spectrometer, obtained hyperspectral images of a wide part of Vesta's surface at a variety of spatial resolutions [1]. Vesta spectra are similar to those of the howardite-eucrite-diogenite (HED) meteorites. Moreover, they are characterized by the two iron-bearing pyroxene bands at 0.9 (band I) and 1.9 microns (band II). Vesta surface's is dominated by eucrite/howardite with some diogenitic regions situated in the southern hemisphere near the Rheasilvia basin [2]. The surface is heavily craterized and impacts can expose fresh material, thus generating the Bright Material Deposits (BMD) observed within and surrounding certain craters. BMD can be classified into six different types based on their morphological characteristics: Crater Wall/Scarp Material (CWM), Radial Material (RM), Slope Material (SM), Patchy Material (PM), Spot Material (SpM) and Diffuse Plains Material (DPM) [3]. The most widespread BMD are CWM, SM and RM. CWM, SM, RM originate from impacts. CWM is situated on the edge of the craters. Mass wasting from the crater walls and generates the SM, while RM is associated with the ejecta of the craters [4]. BMD are characterized by albedo greater than that of the vestan average, 0.38 [5]. Therefore the different types of deposits present distinct levels of reflectance respect to the Surrounding Regions (SR), in particular: the CWM and SM is approx.40% brighter, the RM is approx.30- 40% brighter; the SpM is about 20-25% brighter and the PM is about 20% brighter. Near the edge of the Rheasilvia basin it is possible to find some extremely bright areas ~80% brighter than the vestan average [6].

Zambon, F.↗

Spectral Characterization of Bright Materials on Vesta

The surface of Vesta, as observed by the camera and imaging spectrometer onboard the Dawn spacecraft, displays large surface diversity in terms of its geology and mineralogy with noticeably dark and bright areas on the surface often associated with various geological features and showing remarkably different forms. Here we report our initial attempt to spectrally characterize the areas that are distinctively brighter than their surroundings.

Capaccioni, Fabrizio↗

Types and Distribution of Bright Materials in 4 Vesta

A strong case can be made that Vesta is the parent asteroid of the howardite, eucrite and diogenite (HED) meteorites [1]. As such, we have over a century of detailed sample analysis experience to call upon when formulating hypotheses regarding plausible lithologic diversity on Vesta. It thus came as a surprise when Dawn s Framing Camera (FC) first revealed distinctly localized materials of exceptionally low and high albedos, often closely associated. To understand the nature and origin of these materials, and how they inform us of the geological evolution of Vesta, task forces began their study. An initial step of the scientific endeavor is to develop a descriptive, non-genetic classification of objects to use as a basis for developing hypotheses and observational campaigns. Here we present a catalog of the types of light-toned deposits and their distribution across Vesta. A companion abstract [2] discusses possible origins of bright materials and the constraints they suggest for vestan geology.

Mittlefehldt, D. W.↗

Visible Color and Photometry of Bright Materials on Vesta

The Dawn Framing Camera (FC) collected images of the surface of Vesta at a pixel scale of ~70 m in the High Altitude Mapping Orbit (HAMO) phase through its clear and seven color filters spanning from 430 nm to 980 nm. The surface of Vesta displays a large diversity in its brightness and colors, evidently related to the diverse geology [1] and mineralogy [2]. Here we report a detailed investigation of the visible colors and photometric properties of the apparently bright materials on Vesta in order to study their origin. The global distribution and the spectroscopy of bright materials are discussed in companion papers [3, 4], and the synthesis results about the origin of Vestan bright materials are reported in [5].

Schroder, S. E.↗

Colors and Photometry of Bright Materials on Vesta as Seen by the Dawn Framing Camera

The Dawn spacecraft has been in orbit around the asteroid Vesta since July, 2011. The on-board Framing Camera has acquired thousands of high-resolution images of the regolith-covered surface through one clear and seven narrow-band filters in the visible and near-IR wavelength range. It has observed bright and dark materials that have a range of reflectance that is unusually wide for an asteroid. Material brighter than average is predominantly found on crater walls, and in ejecta surrounding caters in the southern hemisphere. Most likely, the brightest material identified on the Vesta surface so far is located on the inside of a crater at 64.27deg S, 1.54deg . The apparent brightness of a regolith is influenced by factors such as particle size, mineralogical composition, and viewing geometry. As such, the presence of bright material can indicate differences in lithology and/or degree of space weathering. We retrieve the spectral and photometric properties of various bright terrains from false-color images acquired in the High Altitude Mapping Orbit (HAMO). We find that most bright material has a deeper 1-m pyroxene band than average. However, the aforementioned brightest material appears to have a 1-m band that is actually less deep, a result that awaits confirmation by the on-board VIR spectrometer. This site may harbor a class of material unique for Vesta. We discuss the implications of our spectral findings for the origin of bright materials.

Schroeder, S. E.↗

Investigating the Origin of Bright Materials on Vesta: Synthesis, Conclusions, and Implications

The Dawn spacecraft started orbiting the second largest asteroid (4) Vesta in August 2011, revealing the details of its surface at an unprecedented pixel scale as small as approx.70 m in Framing Camera (FC) clear and color filter images and approx.180 m in the Visible and Infrared Spectrometer (VIR) data in its first two science orbits, the Survey Orbit and the High Altitude Mapping Orbit (HAMO) [1]. The surface of Vesta displays the greatest diversity in terms of geology and mineralogy of all asteroids studied in detail [2, 3]. While the albedo of Vesta of approx.0.38 in the visible wavelengths [4, 5] is one of the highest among all asteroids, the surface of Vesta shows the largest variation of albedos found on a single asteroid, with geometric albedos ranging at least from approx.0.10 to approx.0.67 in HAMO images [5]. There are many distinctively bright and dark areas observed on Vesta, associated with various geological features and showing remarkably different forms. Here we report our initial attempt to understand the origin of the areas that are distinctively brighter than their surroundings. The dark materials on Vesta clearly are different in origin from bright materials and are reported in a companion paper [6].

Li, Jian-Yang↗

Geoscientific Mapping of Vesta by the Dawn Mission

The geologic objectives of the Dawn Mission are to derive Vesta's shape, map the surface geology, understand the geological context and contribute to the determination of the asteroids' origin and evolution. Geomorphology and distribution of surface features will provide evidence for impact cratering, tectonic activity, volcanism, and regolith processes. Spectral measurements of the surface will provide evidence of the compositional characteristics of geological units. Age information, as derived from crater size-frequency distributions, provides the stratigraphic context for the structural and compositional mapping results into the stratigraphic context and thusrevealing the geologic history of Vesta.

lunar mapping↗

Design and Manufacture of a Highly Reliable, Miniaturized and Low Mass Shutter Mechanism

This paper describes the development, manufacturing and testing of a lightweight shutter mechanism made of titanium for the MERTIS Instrument. MERTIS is a thermal infrared imaging spectrometer onboard ESA's future BepiColombo mission to Mercury. The mechanism is built as a parallelogram arrangement of flexible hinges, actuated by a voice coil. In a first test run, it was shown that the selected EDM processing led to the generation of titanium oxides and an oxygen-enriched surface layer on the substrate (so called alpha-case layer). In the revised version of the shutter, it was possible to manufacture the complex geometry by micro-milling and an adjacent pickling procedure. The adequacy of this approach was verified by lifetime and vibration testing.

Manhart, M.↗

Spectral and multispectral imaging studies of lunar mantled mare deposits

Near-IR reflectance spectra (0.6-2.5 microns) and CCD images in the extended visible range (0.4-1.0 microns) obtained with Earth-based telescopes have been used to investigate the composition and origin of formations in the Schiller-Schickard region of the Moon. Of particular interest are the Schickard light plains, which represent an area of mantled mare basalt, or cryptomare. Here local pre-existing mare basalts were eroded and incorporated into a highlands-rich deposit by eject a from the Orientale Basin. Spectra observations of mature and immature highland and mare surfaces, as well as dark-halo crater materials provide information on the mafic mineralogy of features in the area. Analyses of the '1 micron' absorption band and spectral mixing models indicate that selected spots in the light plains contain on the order of 50 percent mare basalt. CCD image cubes can be used to map the amount of basalt in the light plains and evaluate changes with radial distance from Orientale.

Blewett, D. T.↗