Engineering topics

Higginson, D. P.

Publications and source records attributed to Higginson, D. P..

At least 19 records

DOE OSTI2024

Neutron-producing gas puff Z-pinch experiments on a fast, low-impedance, 0.5 MA linear transformer driver

A study on the neutron production from single and double gas puff Z-pinches on the CESZAR linear transformer driver with ~0.45 MA current and 170 ns rise time is presented. Total neutron yield measurements made with a LaBr activation detector are compared for three configurations, using a double nozzle setup. When a single, hollow, deuterium gas shell was used, reliable implosions could only be attained at higher load mass than the optimal value to match implosion time with the driver rise time, with neutron yields of ~10 6 per pulse. The use of a double gas puff configuration with a deuterium center jet allowed a reduction in the shell density and operation closer to machine-matched conditions, recording up to (4.1 ± 0.3) × 10 7 neutrons/pulse when either Kr or D 2 was used in the shell. For a comparable mass and implosion time, using a higher atomic-number gas in the outer shell results in more unstable plasma surface and smaller plasma radius at the location of instability bubbles, which, however, do not seem to consistently correlate with a higher neutron yield. Comparing implosion dynamics with models and neutron yields with literature scaling suggests that the machine current is not well coupled to the plasma during the final stages of compression. Optimizing current and energy coupling to the pinched plasma is critical to improving performance, particularly in low-impedance drivers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

PANDA-FES: Portable and Adaptable Neutron Diagnostics for Advancing Fusion Energy Science

Nuclear fusion is a potential source of carbon-free electricity with many concepts in development. The Portable and Adaptable Neutron Diagnostics for Advancing Fusion Energy Science (PANDA-FES) suite has been deployed since 2021 to measure neutron yield, energy, and spatiotemporal source location at two different Z-pinch fusion devices. This diagnostic can be used at a variety of facilities pursuing fusion in the magnetic, inertial, and magneto-inertial regimes. These different regimes have a wide range of time scales from less than 100 ns to a few μ s, neutron yields from 10 6 to 10 11 , and noise environments. Neutron yield is measured through activation of 79 Br and 89 Y with calibrated detectors. Temporal, spatial, and energy dependence of neutrons is measured with scintillators coupled to photomultiplier tubes (PMTs). Experimental setups and data analysis methods have been developed for these conditions. Finally, neutron yield, neutron energy anisotropy, and spatiotemporal evolution of the source have been measured.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Elevated Electron Temperature Coincident with Observed Fusion Reactions in a Sheared-Flow-Stabilized Z Pinch

The sheared-flow-stabilized Z pinch concept has been studied extensively and is able to produce fusion-relevant plasma parameters along with neutron production over several microseconds. In this work, we present elevated electron temperature results spatially and temporally coincident with the plasma neutron source. An optical Thomson scattering apparatus designed for the FuZE device measures temperatures in the range of 1–3 keV on the axis of the device, 20 cm downstream of the nose cone. The 17-fiber system measures the radial profiles of the electron temperature. Scanning the laser time with respect to the neutron pulse time over a series of discharges allows the reconstruction of the T e temporal response, confirming that the electron temperature peaks simultaneously with the neutron output, as well as the pinch current and inductive voltage generated within the plasma. Comparison to spectroscopic ion temperature measurements suggests a plasma in thermal equilibrium. The elevated T e confirms the presence of a plasma assembled on axis, and indicates limited radiative losses, demonstrating a basis for scaling this device toward net gain fusion conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Demonstrating imaging plate detector stacks for proton radiography using exploding pusher capsules

A new detector design has been fielded on the Omega-60 laser facility using a D 3 He backlighter capsule to radiograph a magnetized experiment. D 3 He capsules produce a low flux (~ 10 8 total yield in 4π) of protons requiring detectors with close-to single-particle sensitivity to be employed. The new detector stack consisted of both imaging plate (IP) and CR-39 to detect 14.7 MeV protons where, historically, only CR-39 has been used. IP is sensitive to significant contributions in signal from both x-rays and protons so additional filtering has to be added to attenuate the x-rays. Here, the signals and features observed from a single shot are detected by both IP and CR-39, giving confirmation that it is protons creating the signatures on the IP. Measurements of PSL/pixel are used to calculate approximate on-shot proton yields and agree with commonly measured yields. A second IP is used at the rear of the stack to measure, and subsequently remove, a background signal. The spatial resolution at the IP is limited, primarily, by a range of proton energies with varying deflections being recorded at the detector, causing potential ‘blurring’ of features. We find for this setup that the blurring effect is less than the smallest identifiable features observed at the detector, and therefore of minimal impact. A large benefit to this new stack design is that IP can be scanned and processed on much faster timescales than CR-39 allowing for prompt shot feedback. Future designs and modifications to the stack design fielded on this experiment could help improve the contrast of the radiograph on IP, as well as detecting protons produced at alternative energies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

Electron Injection via Modified Diffusive Shock Acceleration in High-Mach-number Collisionless Shocks

The ability of collisionless shocks to efficiently accelerate nonthermal electrons via diffusive shock acceleration (DSA) is thought to require an injection mechanism capable of preaccelerating electrons to high enough energy where they can start crossing the shock front potential. We propose, and show via fully kinetic plasma simulations, that in high-Mach-number shocks electrons can be effectively injected by scattering in kinetic-scale magnetic turbulence produced near the shock transition by the ion Weibel, or current filamentation, instability. We describe this process as a modified DSA mechanism where initially thermal electrons experience the flow velocity gradient in the shock transition and are accelerated via a first-order Fermi process as they scatter back and forth. The electron energization rate, diffusion coefficient, and acceleration time obtained in the model are consistent with particle-in-cell simulations and with the results of recent laboratory experiments where nonthermal electron acceleration was observed. This injection model represents a natural extension of DSA and could account for electron injection in high-Mach-number astrophysical shocks, such as those associated with young supernova remnants and accretion shocks in galaxy clusters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Kinetic mix at gas-shell interface in inverted corona fusion targets

Gas-filled, laser-driven “inverted corona” fusion targets have attracted interest as a low-convergence neutron source and platform for studying kinetic physics. At the fill pressures under investigation, ejected particles from the shell can penetrate deeply into the gas before colliding, leading to significant mixing across the gas–shell interface. Here, we use kinetic-ion, fluid-electron hybrid particle-in-cell simulations to explore the nature of that mix. Simulations of the system demonstrate characteristics of a weakly collisional electrostatic shock, whereby a strong electric field accelerates shell ions into the rarefied gas and reflects upstream gas ions. This interpenetration is mediated by collisional processes: At higher initial gas pressure, fewer shell particles pass into the mix region and reach the hotspot. This effect is detectable through neutron yield scaling vs gas pressure. Predictions of neutron yield scaling show excellent agreement with experimental data recorded at the OMEGA laser facility, suggesting that 1D kinetic mechanisms are sufficient to capture the mix process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

First Experiments and Radiographs on the MegaJOuLe Neutron Imaging Radiography (MJOLNIR) Dense Plasma Focus

We report a dense plasma focus (DPF) is a relatively compact coaxial plasma gun, which completes its discharge as a Z-pinch. These devices are designed to operate at a variety of scales to produce short (<100 ns) pulses of ions, X-rays, and/or neutrons. LLNL recently constructed and brought into operation a new device, the MegaJOuLe Neutron Imaging Radiography (MJOLNIR) DPF, which is designed for radiography and high-yield operations. This device has been commissioned and has achieved neutron yields of up to 3.8E11 neutrons/pulse at 2.5-MA peak current while operating at up to 1 MJ of stored energy in its original pulsed power configuration. MJOLNIR is equipped with a wide range of diagnostics, including nuclear activation detectors, neutron time-of-flight (nToF) detectors, a fast-framing camera, optical light gates, and a time-gated neutron and X-ray imager. LLNL also runs unique particle-in-cell (PIC) simulations of DPF discharges in the Chicago code and has gained significant insight into the various physical factors that influence neutron yield. MJOLNIR is one of the first DPFs whose design and continual upgrades are heavily influenced by model predictions. In this article, we describe insights from modeling, device operation, and recent results. Comparisons between modeling predictions and measurements, as well as X-ray and neutron images are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Laboratory disruption of scaled astrophysical outflows by a misaligned magnetic field

The shaping of astrophysical outflows into bright, dense, and collimated jets due to magnetic pressure is here investigated using laboratory experiments. Here we look at the impact on jet collimation of a misalignment between the outflow, as it stems from the source, and the magnetic field. For small misalignments, a magnetic nozzle forms and redirects the outflow in a collimated jet. For growing misalignments, this nozzle becomes increasingly asymmetric, disrupting jet formation. Our results thus suggest outflow/magnetic field misalignment to be a plausible key process regulating jet collimation in a variety of objects from our Sun’s outflows to extragalatic jets. Furthermore, they provide a possible interpretation for the observed structuring of astrophysical jets. Jet modulation could be interpreted as the signature of changes over time in the outflow/ambient field angle, and the change in the direction of the jet could be the signature of changes in the direction of the ambient field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Electron acceleration in laboratory-produced turbulent collisionless shocks

Astrophysical collisionless shocks are among the most powerful particle accelerators in the Universe. Generated by violent interactions of supersonic plasma flows with the interstellar medium, supernova remnant shocks are observed to amplify magnetic fields and accelerate electrons and protons to highly relativistic speeds. In the well-established model of diffusive shock acceleration, relativistic particles are accelerated by repeated shock crossings. However, this requires a separate mechanism that pre-accelerates particles to enable shock crossing. This is known as the ‘injection problem’, which is particularly relevant for electrons, and remains one of the most important puzzles in shock acceleration. In most astrophysical shocks, the details of the shock structure cannot be directly resolved, making it challenging to identify the injection mechanism. In this letter we report results from laser-driven plasma flow experiments, and related simulations, that probe the formation of turbulent collisionless shocks in conditions relevant to young supernova remnants. We show that electrons can be effectively accelerated in a first-order Fermi process by small-scale turbulence produced within the shock transition to relativistic non-thermal energies, helping overcome the injection problem. Our observations provide new insight into electron injection at shocks and open the way for controlled laboratory studies of the physics underlying cosmic accelerators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Measurement of Kinetic-Scale Current Filamentation Dynamics and Associated Magnetic Fields in Interpenetrating Plasmas

Here, we present the first local, quantitative measurements of ion current filamentation and magnetic field amplification in interpenetrating plasmas, characterizing the dynamics of the ion Weibel instability. The interaction of a pair of laser-generated, counterpropagating, collisionless, supersonic plasma flows is probed using optical Thomson scattering (TS). Analysis of the TS ion-feature revealed anticorrelated modulations in the density of the two ion streams at the spatial scale of the ion skin depth c/ω pi = 120 μm, and a correlated modulation in the plasma current. The inferred current profile implies a magnetic field amplitude ~30 ± 6 T , corresponding to ~1% of the flow kinetic energy, indicating that magnetic trapping is the dominant saturation mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Hybrid particle-in-cell simulations of laser-driven plasma interpenetration, heating, and entrainment

Kinetic-ion, quasineutral, fluid-electron particle-in-cell simulations of interpenetrating carbon–carbon plasma flows in 2D RZ cylindrical geometry are presented. The simulations are initialized with solid density targets that are subsequently irradiated by 10 14 W/cm 2 intensity lasers using a raytracing package. The ablation, interpenetration, heating, slowing, entrainment, and stagnation of the plasma flows evolve self-consistently within the code. The particle density, velocity phase space, and fits to the velocity distribution functions are used, along with analytical collisional stopping rates, to interpret the dynamics of the flow evolution. Comparisons to multifluid simulations are described and used to highlight ion-kinetic effects in the setup. Synthetic Thomson scattering diagnostic signals are generated using detailed knowledge of the plasma distribution functions. The large scale of the system, 1 × 1 mm for 2 ns, and the detailed dynamics extracted demonstrate that such hybrid codes are powerful tools for the design and evaluation of laboratory-scale high-energy-density plasma physics experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

The response function of Fujifilm BAS-TR imaging plates to laser-accelerated titanium ions

Calibrated diagnostics for energetic particle detection allow for the systematic study of charged particle sources. The Fujifilm BAS-TR imaging plate (IP) is a reusable phosphorescent detector for radiation applications such as x-ray and particle beam detection. The BAS-TR IP has been absolutely calibrated to many low-Z (low proton number) ions, and extending these calibrations to the mid-Z regime is beneficial for the study of laser-driven ion sources. The Texas Petawatt Laser was used to generate energetic ions from a 100 nm titanium foil, and charge states Ti 10+ through Ti 12+ , ranging from 6 to 27 MeV, were analyzed for calibration. A plastic detector of CR-39 with evenly placed slots was mounted in front of the IP to count the number of ions that correspond with the IP levels of photo-stimulated luminescence (PSL). Here, a response curve was fitted to the data, yielding a model of the PSL signal vs ion energy. Comparisons to other published response curves are also presented, illustrating the trend of PSL/nucleon decreasing with increasing ion mass.

47 OTHER INSTRUMENTATION↗

DOE OSTI2019

Laboratory investigation of particle acceleration and magnetic field compression in collisionless colliding fast plasma flows

In many natural phenomena in space (cosmic-rays, fast winds), non-thermal ion populations are produced, with wave-particle interactions in self-induced electromagnetic turbulence being suspected to be mediators. However, the processes by which the electromagnetic energy is bestowed upon the particles is debated, and in some cases requires field compression. Here we show that laboratory experiments using high-power lasers and external strong magnetic field can be used to infer magnetic field compression in the interpenetration of two collisionless, high-velocity (0.01–0.1c) quasi-neutral plasma flows. This is evidenced through observed plasma stagnation at the flows collision point, which Particle-in-Cell (PIC) simulations suggest to be the signature of magnetic field compression into a thin layer, followed by its dislocation into magnetic vortices. Acceleration of protons from the plasma collision is observed as well. As a possible scenario, with 1D and 2D PIC simulations we consider a compression of the vortices against dense plasma remnants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Kinetic simulations of sheared flow stabilization in high-temperature Z-pinch plasmas

We present that the first fully kinetic particle-in-cell (PIC) simulations of sheared flow stabilized Z-pinch plasmas show the suppression of the sausage instability by shear, ∂ r v z ≠ 0, with flow Mach numbers ≲1, consistent with experimental observations. Experimental investigations of sheared-flow stabilized Z-pinches demonstrated stability for 10 s of microseconds, over 1000 Alfvén radial transit times, in quasi steady-state plasmas that are an intermediate between conventional inertial and magnetic confinement systems. The observed stability coincides with the presence of radial shear in axial flow profiles with peak speeds less than Mach 1, and experiments are underway to validate scaling this design to fusion conditions. The experimentally observed stability agrees with models of m = 1 kink mode suppression by sheared flows, but existing models of the m = 0 sausage mode underestimate the efficacy of sheared flow stabilization. These models rely on fluid approximations and find that stabilization requires flows ranging from Mach 1.7 to 4.3, and in some cases, stabilization is not reproduced in the models. This is faster than the measured flows in long-lived plasmas and would necessitate substantial energy convection out of the Z-pinch and the need to drive and sustain supersonic flows in future devices. The MHD models typically used in the literature are invalid in the high-temperature, high-current environments desirable for many Z-pinch applications, and they ignore large Larmor radius effects and viscous dissipation which are known to impact Z-pinch stability. PIC simulations can capture all these effects as well as kinetic instabilities that could influence the performance of high-temperature sheared flow stabilized Z-pinch plasmas. The PIC simulations presented here show the suppression and damping of m = 0 modes by sheared flows ∂ r v z = 0.75v A /r 0 with flow Mach numbers ≲1. Lastlyl, equivalent stability occurs under plasma conditions ranging from the limits of present-day experimental capabilities to the projected conditions of a sheared flow stabilized Z-pinch reactor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Effect of polarity on beam and plasma target formation in a dense plasma focus

Dense plasma focus (DPF) devices are conventionally operated with a polarity such that the inner electrode (IE) is the anode. It has been found that interchanging the polarity of the electrodes (i.e., IE as the cathode) can cause an order of magnitude decrease in the neutron yield. This polarity riddle has previously been studied empirically through several experiments and is yet not well understood. Herein, we have performed kinetic simulations using the particle-in-cell modeling to investigate the problem. This is the first time that both polarities have been studied with simulations in great detail. In our simulations, we have modeled the entire beam and plasma target formation processes, but we did not consider differences in break-down conditions caused by the two polarities. We have found that when using reverse polarity ions are still accelerated and, in fact, attain similar energy spectra as in the standard polarity case. The difference is that the fields are flipped and thus ions are accelerated in the opposite direction. So, in the reverse polarity case, the majority of the “plasma target” (formed by the imploding plasma) is in the opposite direction of the beam, and thus, the beam hits the IE and produces few neutrons. With a better inner electrode configuration, reverse polarity is able to create a high-quality ion beam as well as a high-density target. Both can be comparable to that generated by standard polarity. Furthermore, we will show that it is easier to add an additional solid catcher target to a DPF device with reverse polarity, potentially enabling it to generate more neutrons than standard polarity.

Plasma sheaths↗

DOE OSTI2019

Sustained Neutron Production from a Sheared-Flow Stabilized Z Pinch

The sheared-flow stabilized Z pinch has demonstrated long-lived plasmas with fusion-relevant parameters. Here we present the first experimental results demonstrating sustained, quasi-steady-state neutron production from the fusion Z -pinch experiment, operated with a mixture of 20% deuterium/80% hydrogen by pressure. Neutron emissions lasting approximately 5 μs are reproducibly observed with pinch currents of approximately 200 kA during an approximately 16 μs period of plasma quiescence. The average neutron yield is estimated to be ( 1.25 ± 0.45 ) x 10 5 neutrons / pulse and scales with the square of the deuterium concentration. Coincident with the neutron signal, plasma temperatures of 1–2 keV and densities of approximately 10 17 cm -3 with 0.3 cm pinch radii are measured with fully integrated diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Kinetic effects on neutron generation in moderately collisional interpenetrating plasma flows

Collisional kinetic modifications of ion distributions in interpenetrating flows are investigated by irradiating two opposing targets, either CD/CD or CD/CH, on the National Ignition Facility. In the CD/CD case, neutron time-of-flight diagnostics are successfully used to infer the ion temperature, 5–6 keV, and velocity, 500 km/s per flow, of the flows using a multi-fluid approximation of beam-beam nuclear fusion. These values are found to be in agreement with simulations and other diagnostics. However, for CD/CH, the multi-fluid assumption breaks down, as fusion is quasi-thermonuclear in this case and thus more dependent on the details of the ion velocity distribution. Using kinetic-ion, hydrodynamic-electron, and hybrid particle-in-cell modeling, this is found to be partially due to a skewed deviation from a Maxwellian in the ion velocity distribution function resulting from ion-ion collisions. This skew causes a downshift in the mean neutron velocity that partially resolves the observation in the CD/CH case. Finally, we note that the discrepancy is not completely resolved via collisional effects alone and may be a signature of collisionless electromagnetic interactions such as the Weibel-filamentation instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2018

Maximizing neutron yields by scaling hollow diameter of a dense plasma focus anode [Neutron yield maximization and anode surface damage characterization by scaling hollow diameters of a DPF anode]

Experiments were performed to maximize the neutron yield from a 2 kJ dense plasma focus (DPF) and characterize the amount of copper sputtered from the surface of an anode by varying the diameter of the anodes’ on-axis hollow. The hollow is a void in the copper material along the longitudinal axis of the anode. All the anodes had an outer diameter of 1.2 in. and the diameter of the hollow varied from 0 in. (no hollow) to 1 in. The anodes with a hollow produced a greater number of neutrons per discharge than the anode without a hollow. Over 40 discharges, the hollow anode that yielded the most neutrons (9.1±0.4×10 6 neutrons per discharge produced with the 0.75 in. hollow) produced >6 times more neutrons than the anode with no hollow. A qualitative observation of the anodes after 130 discharges showed less surface damage on anodes with a larger hollow. Quantitative sputter measurements were performed by characterizing the amount of copper sputtered onto on-axis quartz targets for three newly machined anodes, each with a particular hollow diameter. The quantitative results matched the qualitative observations: the copper sputter was reduced using larger hollows. Finally, the largest hollow sputtered 17±1.0 nm/sr/discharge of copper, a reduction of 69% compared to the anode with the most damage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗