Search NASA⌕ Search

Engineering topics

Hill, G. F.

Publications and source records attributed to Hill, G. F..

At least 19 records

Carbon monoxide and methane over Canada: July - August 1990

Carbon monoxide (CO) and methane (CH4) were measured in the 0.15- to 6-km portion of the troposphere over subarctic and boreal landscapes of midcontinent and eastern Canada during July - August 1990. In the mid-continent region, Arctic air entering the region was characterized by relatively uniform CO concentrations (86-108 parts per billion by volume (ppbv)) and CH4 concentrations (1729-1764 ppbv). Local biomass burning and long-range transport of CO into the area from industrial/urban sources and distant fires did frequently produce enhanced and variable concentrations. Emissions of CH4 from the Hudson Bay lowlands was the primary source for enhanced and variable concentrations, especially at altitudes of 0.15-1 km. In eastern Canada, most of the observed variability in CO and CH4 was similar in origin to the phenomena described for the midcontinent region. However, unexpectedly low concentrations of CO (51 ppbv) and CH4 (1688 ppbv) were measured in the midtroposphere on several flights. Combined meteorological and chemical data indicated that the low CO-CH4 events were the result of long-range transport of tropical Pacific marine air to subarctic latitudes.

Harriss, R. C.↗

The role of airborne eddy correlation measurements in global change studies

We have obtained measurements of the mean and turbulent quantities of heat, moisture, momentum, O3, CO, and CH4 from an airborne platform. Species flux measurements obtained from these data provide unique regional-scale information which can be used to evaluate 'scaled-up' flux estimates based on smaller scale observations. Airborne flux data also provide a basis for assessing the uncertainties associated with large-scale ground level flux extrapolations. Airborne constituent budget analyses are possible with this suite of measurements. The local change in the mean value of a parameter can be explained in terms of horizontal advection, vertical turbulent transport, and, in the case of chemically reactive species (i.e., O3), in situ production or destruction. This technique is used to indicate a direct relationship between O3 precursors and the measured in situ production rate.

Ritter, J. A.↗

Airborne tunable diode laser sensor for high-precision concentration and flux measurements of carbon monoxide and methane

An airborne tunable diode laser instrument is described that is capable of operating in two measurement modes. One mode provides high precision (0.1 percent CH4; 1 percent CO) measurements of CH4 and CO with a 5 second response time, and a second mode achieves the very fast response time that is necessary to make airborne eddy correlation flux measurements. Examples of data from atmospheric expeditions of the Global Tropospheric Experiment are presented.

Sachse, G. W.↗

Carbon monoxide over the Amazon Basin during the wet season

Measurements of the distribution of carbon monoxide in the lower atmosphere (150-5000 m) over the Amazon region of Brazil during the wet season, taken in conjunction with the 1987 NASA Global Tropospheric Experiment/Amazon Boundary Layer Experiment (ABLE 2B), are analyzed. About 100 hr of airborne, in situ CO measurements were obtained using a tunable diode laser system, providing insights into factors influencing the basin-scale distribution of CO in the Amazonian troposphere during wet season conditions. Distribution of CO over the altitudes 0.15-4.5 km was influenced by such factors as surface emissions from biological sources and long-range transport of pollutants from Northern Hemisphere sources. It is noted that the disruption of mixed layer growth and decay processes has a particularly important influence on CO concentration in the daytime lower troposphere and that the correlation of CO with O3 was positive under conditions influenced by Northern Hemisphere air and negative under all other conditions observed.

Harriss, R. C.↗

An intercomparison of results from ferrous sulphate and photolytic converter techniques for measurements of NO(x) made during the NASA GTE/CITE 1 aircraft program

Two techniques designed for measurements of NO(x (NO + NO2) were intercompared during aircraft flights made in the spring of 1984 in the middle free troposphere over the eastern Pacific Ocean and southwestern U.S. One NO chemiluminescence instrument was equipped with a ferrous sulphate converter, another with a photolytic converter. The ferrous sulphate-equipped instrument was apparently much less specific for NO2. It registered levels about three times larger than the photolytic converter and gave NO2/NO ratios that were much larger than photochemical calculations would indicate as reasonable. Additionally, the results imply that active NO(x) was only 10-20 percent of the total odd nitrogen in the middle free troposphere.

Ridley, B. A.↗

Carbon monoxide over the Amazon Basin during the 1985 dry season

During the Amazon Boundary Layer Experiment, approximately 100 hours of in situ carbon monoxide measurements were obtained using a tunable diode laser sensor that provided continuous, fast-response (about 1 s) measurements. This data set, taken on board the NASA Electra between July 12 and August 12, 1985, characterizes the temporal and spatial changes in the CO distribution over the Amazon Basin as meteorological conditions progressed from the early to middle phases of the 1985 day season. Early dry-season CO values of 75-95 ppbv were generally observed in the PBL. As the dry season became well established, biomass burning and a persistent capping inversion at about 3 km profoundly altered the CO distribution, with PBL values typically reaching 150-275 ppbv. Concentrations as high as 800 ppbv were measured within identifiable haze layers. An analysis of satellite imagery shows that biomass burning was occurring along the Amazon River system and in savannah areas located more than 1000 km south of the region sampled.

Sachse, G. W.↗

Biomass-burning emissions and associated haze layers over Amazonia

The characteristics of haze layers, which were visually observed over the central Amazon Basin during many of the Amazon Boundary Layer Experiment 2A flights in July/August 1985, were investigated by remote and in situ measurements, using the broad range of instrumentation and sampling equipment on board the Electra aircraft. It was found that these layers strongly influenced the chemical and optical characteristics of the atmosphere over the eastern Amazon Basin. Relative to the regional background, the concentrations of CO, CO2, O3, and NO were significantly elevated in the plumes and haze layers, with the NO/CO ratio in fresh plumes much higher than in the aged haze layers. The haze aerosol was composed predominantly of organic material, NH4, K(+), NO3(-), SO4(2-), and organic anions (formate, acetate, and oxalate).

Andreae, M. O.↗

Meteorological context for fall experiments including distributions of water vapor, ozone, and carbon monoxide

Meteorological contexts for the NASA GTE/CITE 1 fall 1983 flight series are presented and discussed. The large-scale wind, cold cloud, and moisture patterns are illustrated by composite diagrams based on the National Oceanic and Atmospheric Administration 700-, 500-, and 250-mbar analyses and the GOES-West broadband and 6.7-micron (water vapor) infrared photographs. Detailed flight path diagrams are included for seven maritime flights and one continental flight in the free troposphere and boundary layer. For three flights from Hickam Field, in Honolulu, HI, to the Intertropical Convergence Zone, vertical profiles of temperature, dew/frost point departures, wind velocity, and ozone, and carbon monoxide mixing ratios are also presented and discussed. Excellent agreement is demonstrated between the in situ and remote measurements. In particular, the predictive and diagnostic value of the 6.7-micron water vapor photographs is demonstrated.

Danielsen, Edwin F.↗

Three-dimensional analysis of potential vorticity associated with tropopause folds and observed variations of ozone and carbon monoxide

The usability and reliability of potential vorticity as a meteorological stratospheric tracer are evaluated. The concept of potential vorticity conservation during transport in which stratospheric and tropospheric air are mixing is tested. Aircraft data collected on April 20, 1984 in the western and southwestern U.S. are analyzed in order to derive potential vorticity data; vertical cross sections of constant-pressure data and temperature and wind speed gradients are examined. The tropopause fold observed during the April 20, 1984 aircraft flights is described. The potential vorticity, ozone mixing ratio, and carbon monoxide mixing ratio are compared; a positive correlation between potential vorticity and the ozone mixing ratio and a negative correlation between the potential vorticity and the carbon monoxide mixing ratio are detected. The data support the concepts of the conservation of potential vorticity, the entrainment and mixing of tropospheric air across the boundaries of the fold, and the applicability of potential vorticity as a stratospheric tracer.

Danielsen, Edwin F.↗

Correlations between ozone and carbon monoxide in the lower stratosphere, folded tropopause, and maritime troposphere

The variations of ozone and carbon monoxide with respect to the atmospheric flow structure are investigated for two aircraft flights: one in the upper troposphere/lower stratosphere over the continental United States on April 20, 1984, and the other in the marine troposphere over the eastern Pacific on April 26, 1984. The high frequency (1 Hz) and precision of the measurements allow detailed analysis of the species distribution down to length scales of the order of 1 km. Correlations between the two species are made on large, medium, and small scales of motion, and the results are interpreted. In general, the correlations are negative with some regions of positive correlation. The interpretation of these results is discussed.

Hipskind, R. Stephen↗

An intercomparison of carbon monoxide measurement techniques

Results from an intercomparison of techniques to measure tropospheric levels of carbon monoxide (CO) are discussed. The intercomparison was conducted as part of the National Aeronautics and Space Administration's Global Tropospheric Experiment (GTE) and was held at Wallops Island, VA, in July 1983. Instruments intercompared included a laser differential absorption method and three grab sample/gas chromatograph methods. The intercomparison consisted of simultaneous measurements of ambient levels of CO and controlled injections of CO from a common manifold. Results from the techniques exhibited a high degree of correlation among themselves and with changes in the CO mixing ratio. The results suggested a level of agreement among the techniques of about 15 percent. However, a day-to-day bias between the techniques was observed, which resulted in differences between techniques as large as 38 percent.

Hoell, J. M., Jr.↗

Airborne tunable diode laser system for trace gas measurements

Sachse et al. (1976) have reported the development of an airborne tunable diode laser (TDL) system, named the Differential Absorption CO Monitor (DACOM). The absorption path was 10 m long and located in the free airstream along the fuselage of a C-54 aircraft. The present investigation is concerned with a modification of the DACOM instrument. Differences between the new instrument and the original one are related to a replacement of the external absorption path with a White cell. The instrument has the capability to suppress TDL excess noise. The laser refrigerator has been redesigned to permit an alternative method of cooling the TDL when electric power is not available.

Sachse, G. W.↗

Summary of 1978 Southeastern Virginia Urban Plume study: Aircraft results for carbon monoxide, methane, nonmethane hydrocarbons, and ozone

The characteristics of the Southeastern Virginia urban plume were defined with emphasis on the photon-oxidant species. The measurement area was a rectangle, approximately 150 km by 100 km centered around Cape Charles, Virginia. Included in this area are the cities of Norfolk, Virginia Beach, Chesapeake, Newport News, and Hampton. The area is bounded on the north by Wallops Island, Virginia, and on the south by the Hampton Roads area of Tidewater Virginia. The major axis of the rectangle is oriented in the southwest-northeast direction. The data set includes aircraft measurements for carbon monoxide, methane, nonmethane hydrocarbons, and ozone. The experiment shows that CO can be successfully measured as a tracer gas and used as an index for determining localized and urban plumes. The 1978 data base provided sufficient data to assess an automated chromatograph with flame ionization detection used for measuring methane and nonmethane hydrocarbons in flight.

Hill, G. F.↗

Differential laser absorption monitoring of the atmosphere

In the airborne detection system of atmospheric constituents and pollutants described, double-ended differential absorption measurement is accomplished by rapidly current tuning the wavelength of a PbSSe diode laser across a single line of the species under consideration. As the laser wavelength sweeps periodically across the absorption line, the laser beam is amplitude modulated and is then synchronously detected. With this technique, a minimum detectable differential transmission of 0.02 percent is obtained for a 1-sec integration time.

Rubin, B.↗

DACOM - A rapid, high sensitivity airborne carbon monoxide monitor

A rapid, high sensitivity differential absorption carbon monoxide monitor (DACOM) has been developed to measure CO from an aircraft. The differential absorption measurement is accomplished by rapidly current tuning the wavelength of a PbSSe diode laser across a single 4.7 micron CO absorption line. As the laser wavelength sweeps periodically across the absorption line, the laser beam is amplitude modulated and is then synchronously detected. With this technique a minimum detectable differential transmission of 0.02% is obtained for a 1 second integration time. This performance is equivalent to a CO sensitivity of 5 ppb for a 10 meter absorption path. The techniques used to achieve this high sensitivity will be discussed. In the aircraft installation a 10 meter absorption path is located in the airstream along the fuselage of a C-54 aircraft. During flight tests of DACOM, a sensitivity of 20 ppb for a 1-second integration time has been achieved.

Sachse, G. W.↗