Search NASA⌕ Search

Engineering topics

Hoffman, Forrest

Publications and source records attributed to Hoffman, Forrest.

At least 37 records · Page 2

The Effects of Phosphorus Cycle Dynamics on Carbon Sources and Sinks in the Amazon Region: A Modeling Study Using ELM v1

Tropical forests play a crucial role in the global carbon cycle, accounting for one third of the global net primary productivity and containing about 25% of global vegetation biomass and soil carbon. This is particularly true for tropical forests in the Amazon region, as these comprise approximately 50% of the world's tropical forests. It is therefore important for us to understand and represent the processes that determine the fluxes and storage of carbon in these forests. In this study, we show that the implementation of phosphorus (P) cycle and P limitation in the version 1 of the Energy Exascale Earth System Model land model (ELM v1) improves simulated spatial pattern of wood productivity. The P-enabled ELM v1 is able to capture the declining west-to-east gradient of productivity, consistent with field observations. We also show that by improving the representation of mortality processes using soils data, ELMv1 is able to reproduce the observed spatial pattern of above ground biomass. Our model simulations show that the consideration of P availability leads to a smaller carbon sink associated with CO 2 fertilization effect and lower carbon emissions due to land use and land cover change. Our simulations suggest P limitation would significantly reduce the carbon sink associated with CO 2 fertilization effects through the 21st century. We conclude that P cycle dynamics affect both sources and sinks of carbon in the Amazon region, and the effects of P limitation would become increasingly important as CO 2 increases. Finally, P limitation must be considered for projecting future carbon dynamics in tropical ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Biogeochemical Equation of State for the Sea-Air Interface

We have recently argued that marine interfacial surface tension must have a distinctive biogeography because it is mediated by fresh surfactant macromolecules released locally through the food web. Here we begin the process of quantification for associated climate flux implications. A low dimensionality (planar) equation of state is invoked at the global scale as our main analysis tool. For the reader’s convenience, fundamental surfactant physical chemistry principles are reviewed first, as they pertain to tangential forces that may alter oceanic eddy, ripple, and bubble fields. A model Prandtl (neutral) wind stress regime is defined for demonstration purposes. It is given the usual dependence on roughness, but then in turn on the tension reduction quantity known as surface pressure. This captures the main net influences of biology and detrital organics on global microlayer physics. Based on well-established surrogate species, tangent pressures are related to distributed ecodynamics as reflected by the current marine systems science knowledge base. Reductions to momentum and related heat-vapor exchange plus gas and salt transfer are estimated and placed on a coarse biogeographic grid. High primary production situations appear to strongly control all types of transfer, whether seasonally or regionally. Classic chemical oceanographic data on boundary state composition and behaviors are well reproduced, and there is a high degree of consistency with conventional micrometeorological wisdom. But although our initial best guesses are quite revealing, coordinated laboratory and field experiments will be required to confirm the broad hypotheses even partially. We note that if the concepts have large scale validity, they are super-Gaian. Biological control over key planetary climate-transfer modes may be accomplished through just a single rapidly renewed organic monolayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arctic Vegetation Mapping Using Unsupervised Training Datasets and Convolutional Neural Networks

Land cover datasets are essential for modeling and analysis of Arctic ecosystem structure and function and for understanding land–atmosphere interactions at high spatial resolutions. However, most Arctic land cover products are generated at a coarse resolution, often limited due to cloud cover, polar darkness, and poor availability of high-resolution imagery. A multi-sensor remote sensing-based deep learning approach was developed for generating high-resolution (5 m) vegetation maps for the western Alaskan Arctic on the Seward Peninsula, Alaska. The fusion of hyperspectral, multispectral, and terrain datasets was performed using unsupervised and supervised classification techniques over a ~343 km 2 area, and a high-resolution (5 m) vegetation classification map was generated. An unsupervised technique was developed to classify high-dimensional remote sensing datasets into cohesive clusters. We employed a quantitative method to add supervision to the unlabeled clusters, producing a fully labeled vegetation map. We then developed convolutional neural networks (CNNs) using the multi-sensor fusion datasets to map vegetation distributions using the original classes and the classes produced by the unsupervised classification method. To validate the resulting CNN maps, vegetation observations were collected at 30 field plots during the summer of 2016, and the resulting vegetation products developed were evaluated against them for accuracy. Our analysis indicates the CNN models based on the labels produced by the unsupervised classification method provided the most accurate mapping of vegetation types, increasing the validation score (i.e., precision) from 0.53 to 0.83 when evaluated against field vegetation observations.

54 ENVIRONMENTAL SCIENCES↗

Wildfire Mapping in Interior Alaska Using Deep Neural Networks on Imbalanced Datasets

Wildfires are the dominant disturbance impacting many regions in Alaska and is expected to intensify due to climate change. Accurate tracking and quantification of wildfires are important for climate modeling and ecological studies in this region. Remote sensing platforms (e.g., MODIS, Landsat) are an important tool for mapping wildfires in Alaska at varying spatial and temporal scales. Deep neural networks (DNN) have shown superior performance in many classification problems such as high-dimensional remote sensing data. Detection of wildfires is an imbalanced classification problem where one class contains a much smaller or larger sample size and DNNs performance can decline. We take a known weight-selection strategy during DNN training and apply them to MODIS variables (e.g., NDVI, surface reflectance) for a binary classification (i.e., wildfire or no-wildfire) across Alaska during the 2004 wildfire year, which is one of the largest on record. The method splits the input training data into sets, one for training the DNN to update weights and the other that splits into a validation set that is equally balanced between the wildfire and no-wildfire class. The performance is monitored on the validation set to select the weights based on the best validation-loss score. This approach was applied to two sampled datasets, such as where the no-wildfire class can significantly outweigh the wildfire class. The normal DNN training strategy was unable to map wildfires for the highly imbalanced dataset, however, the weight-selection strategy was able to map wildfires very accurately (0.96 recall score for 78,702 wildfire pixels (500×500 m)).

Langford, Zach↗

Parallel k-means Clustering of Geospatial Data Sets Using Manycore CPU Architectures

The increasing availability of high-resolution geospatiotemporal data sets from sources such as observatory networks, remote sensing platforms, and computational Earth system models has opened new possibilities for knowledge discovery and mining of weather, climate, ecological, and other geoscientific data sets fused from disparate sources. Many of the standard tools used on individual workstations are impractical for the analysis and synthesis of data sets of this size; however, new algorithmic approaches that can effectively utilize the complex memory hierarchies and the extremely high levels of parallelism available in state-of-the-art high-performance computing platforms can enable such analysis. Here, we describe pKluster, an open-source tool we have developed for accelerated k-means clustering of geospatial and geospatiotemporal data, and discuss algorithmic modifications and code optimizations we have made to enable it to effectively use parallel machines based on novel CPU architectures—such as the Intel “Knights Landing” Xeon Phi and Skylake Xeon processors—with many cores and hardware threads, and employing significant single instruction, multiple data (SIMD) parallelism. We outline some applications of the code in ecology and climate science contexts and present a detailed discussion of the performance of the code for one such application, LiDAR-derived vertical vegetation structure classification.

Mills, Richard T↗

Does Marine Surface Tension Have Global Biogeography? Addition for the OCEANFILMS Package

We apply principles of Gibbs phase plane chemistry across the entire ocean-atmosphere interface to investigate aerosol generation and geophysical transfer issues. Marine surface tension differences comprise a tangential pressure field controlling trace gas fluxes, primary organic inputs, and sea spray salt injections, in addition to heat and momentum fluxes. Mapping follows from the organic microlayer composition, now represented in ocean system models. Organic functional variations drive the microforcing, leading to (1) reduced turbulence and (by extension) laminar gas-energy diffusion; plus (2) altered bubble film mass emission into the boundary layer. Interfacial chemical behaviors are, therefore, closely reviewed as the background. We focus on phase transitions among two dimensional “solid, liquid, and gaseous” states serving as elasticity indicators. From the pool of dissolved organic carbon (DOC) only proteins and lipids appear to occupy significant atmospheric interfacial areas. The literature suggests albumin and stearic acid as the best proxies, and we distribute them through ecodynamic simulation. Consensus bulk distributions are obtained to control their adsorptive equilibria. We devise parameterizations for both the planar free energy and equation of state, relating excess coverage to the surface pressure and its modulus. Constant settings for the molecular surrogates are drawn from laboratory study and successfully reproduce surfactant solid-to-gas occurrence in compression experiments. Since DOC functionality measurements are rare, we group them into super-ecological province tables to verify aqueous concentration estimates. Outputs are then fed into a coverage, tension, elasticity code. The resulting two dimensional pressure contours cross a critical range for the regulation of precursor piston velocity, bubble breakage, and primary aerosol sources plus ripple damping. Concepts extend the water-air adsorption theory currently embodied in our OCEANFILMS aerosol emissions package, and the two approaches could be inserted into Earth System Models together. Uncertainties in the logic include kinetic and thermochemical factors operating at multiple scales.

54 ENVIRONMENTAL SCIENCES↗

Climate Change Impacts on Natural Sulfur Production: Ocean Acidification and Community Shifts

Utilizing the reduced-complexity model Hector, a regional scale analysis was conducted quantifying the possible effects climate change may have on dimethyl sulfide (DMS) emissions within the oceans. The investigation began with a review of the sulfur cycle in modern Earth system models. We then expanded the biogeochemical representation within Hector to include a natural ocean component while accounting for acidification and planktonic community shifts. The report presents results from both a latitudinal and a global perspective. This new approach highlights disparate outcomes which have been inadequately characterized via planetary averages in past publications. Our findings suggest that natural sulfur emissions (ESN) may exert a forcing up to 4 times that of the CO 2 marine feedback, 0.62 and 0.15 Wm –2 , respectively, and reverse the radiative forcing sign in low latitudes. Additionally, sensitivity tests were conducted to demonstrate the need for further examination of the DMS loop. As a result, the present work attempts to include dynamic ESN within reduced-complexity simulations of the sulfur cycle, illustrating its impact on the global radiative budget.

54 ENVIRONMENTAL SCIENCES↗

Convolutional Neural Network Approach for Mapping Arctic Vegetation Using Multi-Sensor Remote Sensing Fusion

Accurate and high-resolution maps of vegetation are critical for projects seeking to understand the terrestrial ecosystem processes and land-atmosphere interactions in Arctic ecosystems, such as U.S. Department of Energy's Next Generation Ecosystem Experiment (NGEE) Arctic. However, most existing Arctic vegetation maps are at a coarse resolution and with a varying degree of detail and accuracy. Remote sensing-based approaches for mapping vegetation, while promising, are challenging in high latitude environments due to frequent cloud cover, polar darkness, and limited availability of high-resolution remote sensing datasets (e.g., ~ 5 m). This study proposes a new remote sensing based multi-sensor data fusion approach for developing high-resolution maps of vegetation in the Seward Peninsula, Alaska. We focus detailed analysis and validation study around the Kougarok river, located in the central Seward Peninsula of Alaska. We seek to evaluate the integration of hyper-spectral, multi-spectral, radar, and terrain datasets using unsupervised and supervised classification techniques over a ~343.72 km 2 area for generating vegetation classifications at a variety of resolutions (5 m and 12.5 m). We fist applied a quantitative goodness-of-fit method, called Mapcurves, that shows the degree of spatial concordance between the public coarse resolution maps and k-means clustering values and relabels the k values based on the best overlap. We develop a convolutional neural network (CNN) approach for developing high resolution vegetation maps for our study region in Arctic. We compare two CNN approaches: (1) breaking up the images into small patches (e.g., 6 × 6) and predict the vegetation class for entire patch and (2) semantic segmentation and predict the vegetation class for every pixel. We also perform accuracy assessments of the developed data products and evaluate varying CNN architectures. The fusion of hyperspectral and optical datasets performed the best, with accuracy values increased from 0.64 to 0.96-0.97 when using a training map produced by unsupervised clustering and Mapcurves labeling for both CNN models.

Langford, Zach↗

Transient dynamics of terrestrial carbon storage: Mathematical foundation and its applications

Terrestrial ecosystems have absorbed roughly 30% of anthropogenic CO 2 emissions over the past decades, but it is unclear whether this carbon (C) sink will endure into the future. Despite extensive modeling and experimental and observational studies, what fundamentally determines transient dynamics of terrestrial C storage under global change is still not very clear. Here we develop a new framework for understanding transient dynamics of terrestrial C storage through mathematical analysis and numerical experiments. Our analysis indicates that the ultimate force driving ecosystem C storage change is the C storage capacity, which is jointly determined by ecosystem C input (e.g., net primary production, NPP) and residence time. Since both C input and residence time vary with time, the C storage capacity is time-dependent and acts as a moving attractor that actual C storage chases. The rate of change in C storage is proportional to the C storage potential, which is the difference between the current storage and the storage capacity. The C storage capacity represents instantaneous responses of the land C cycle to external forcing, whereas the C storage potential represents the internal capability of the land C cycle to influence the C change trajectory in the next time step. The influence happens through redistribution of net C pool changes in a network of pools with different residence times. Moreover, this and our other studies have demonstrated that one matrix equation can replicate simulations of most land C cycle models (i.e., physical emulators). As a result, simulation outputs of those models can be placed into a three-dimensional (3-D) parameter space to measure their differences. The latter can be decomposed into traceable components to track the origins of model uncertainty. In addition, the physical emulators make data assimilation computationally feasible so that both C flux- and pool-related datasets can be used to better constrain model predictions of land C sequestration. Altogether, this new mathematical framework offers new approaches to understanding, evaluating, diagnosing, and improving land C cycle models.

54 ENVIRONMENTAL SCIENCES↗

Transient dynamics of terrestrial carbon storage: Mathematical foundation and numeric examples

Terrestrial ecosystems absorb roughly 30% of anthropogenic CO 2 emissions since preindustrial era, but it is unclear whether this carbon (C) sink will endure into the future. Despite extensive modeling, experimental, and observational studies, what fundamentally determines transient dynamics of terrestrial C storage under climate change is still not very clear. Here we develop a new framework for understanding transient dynamics of terrestrial C storage through mathematical analysis and numerical experiments. Our analysis indicates that the ultimate force driving ecosystem C storage change is the C storage capacity, which is jointly determined by ecosystem C input (e.g., net primary production, NPP) and residence time. Since both C input and residence time vary with time, the C storage capacity is time-dependent and acts as a moving attractor that actual C storage chases. The rate of change in C storage is proportional to the C storage potential, the difference between the current storage and the storage capacity. The C storage capacity represents instantaneous responses of the land C cycle to external forcing, whereas the C storage potential represents the internal capability of the land C cycle to influence the C change trajectory in the next time step. The influence happens through redistribution of net C pool changes in a network of pools with different residence times. Furthermore, this and our other studies have demonstrated that one matrix equation can exactly replicate simulations of most land C cycle models (i.e., physical emulators). As a result, simulation outputs of those models can be placed into a three-dimensional (3D) parameter space to measure their differences. The latter can be decomposed into traceable components to track the origins of model uncertainty. Moreover, the emulators make data assimilation computationally feasible so that both C flux- and pool-related datasets can be used to better constrain model predictions of land C sequestration. We also propose that the C storage potential be the targeted variable for research, market trading, and government negotiation for C credits.

54 ENVIRONMENTAL SCIENCES↗

Mapping Arctic plant functional type distributions in the Barrow Environmental Observatory using WorldView-2 and LiDAR datasets

Multi-scale modeling of Arctic tundra vegetation requires characterization of the heterogeneous tundra landscape, which includes representation of distinct plant functional types (PFTs). We combined high-resolution multi-spectral remote sensing imagery from the WorldView-2 satellite with light detecting and ranging (LiDAR)-derived digital elevation models (DEM) to characterize the tundra landscape in and around the Barrow Environmental Observatory (BEO), a 3021-hectare research reserve located at the northern edge of the Alaskan Arctic Coastal Plain. Vegetation surveys were conducted during the growing season (June August) of 2012 from 48 1 m 1 m plots in the study region for estimating the percent cover of PFTs (i.e., sedges, grasses, forbs, shrubs, lichens and mosses). Statistical relationships were developed between spectral and topographic remote sensing characteristics and PFT fractions at the vegetation plots from field surveys. These derived relationships were employed to statistically upscale PFT fractions for our study region of 586 hectares at 0.25-m resolution around the sampling areas within the BEO, which was bounded by the LiDAR footprint. We employed an unsupervised clustering for stratification of this polygonal tundra landscape and used the clusters for segregating the field data for our upscaling algorithm over our study region, which was an inverse distance weighted (IDW) interpolation. We describe two versions of PFT distribution maps upscaled by IDW from WorldView-2 imagery and LiDAR: (1) a version computed from a single image in the middle of the growing season; and (2) a version computed from multiple images through the growing season. This approach allowed us to quantify the value of phenology for improving PFT distribution estimates. We also evaluated the representativeness of the field surveys by measuring the Euclidean distance between every pixel. This guided the ground-truthing campaign in late July of 2014 for addressing uncertainty based on representativeness analysis by selecting 24 1 m 1 m plots that were well and poorly represented. Ground-truthing indicated that including phenology had a better accuracy (R 2 =0.75, RMSE=9.94) than the single image upscaling (R 2 =0.63 , RMSE=12.05) predicted from IDW. We also updated our upscaling approach to include the 24 ground-truthing plots, and a second ground-truthing campaign in late August of 2014 indicated a better accuracy for the phenology model (R 2 =0.61 , RMSE=13.78 ) than only using the original 48 plots for the phenology model (R 2 =0.23 , RMSE=17.49). After all, we believe that the cluster-based IDW upscaling approach and the representativeness analysis offer new insights for upscaling high-resolution data in fragmented landscapes. This analysis and approach provides PFT maps needed to inform land surface models in Arctic ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Remote sensing-based characterization, 2-m, Plant Functional Type Distributions, Barrow Environmental Observatory, 2010

Remote sensing-based characterization of plant functional type distributions at the Barrow Environmental Observatory. Dataset DOI: https://doi.org/10.5440/1123668 Additional details are available in the associated paper Langford, et. al. 2016. Mapping Arctic Plant Functional Type Distributions in the Barrow Environmental Observatory Using WorldView-2 and LiDAR Datasets. Remote Sens. 2016, 8, 733. http://dx.doi.org/10.3390/rs8090733

54 ENVIRONMENTAL SCIENCES↗

C4MIP – The Coupled Climate–Carbon Cycle Model Intercomparison Project: Experimental protocol for CMIP6

Coordinated experimental design and implementation has become a cornerstone of global climate modelling. Model Intercomparison Projects (MIPs) enable systematic and robust analysis of results across many models, by reducing the influence of ad hoc differences in model set-up or experimental boundary conditions. As it enters its 6th phase, the Coupled Model Intercomparison Project (CMIP6) has grown significantly in scope with the design and documentation of individual simulations delegated to individual climate science communities. The Coupled Climate–Carbon Cycle Model Intercomparison Project (C4MIP) takes responsibility for design, documentation, and analysis of carbon cycle feedbacks and interactions in climate simulations. These feedbacks are potentially large and play a leading-order contribution in determining the atmospheric composition in response to human emissions of CO 2 and in the setting of emissions targets to stabilize climate or avoid dangerous climate change. For over a decade, C4MIP has coordinated coupled climate–carbon cycle simulations, and in this paper we describe the C4MIP simulations that will be formally part of CMIP6. While the climate–carbon cycle community has created this experimental design, the simulations also fit within the wider CMIP activity, conform to some common standards including documentation and diagnostic requests, and are designed to complement the CMIP core experiments known as the Diagnostic, Evaluation and Characterization of Klima (DECK). C4MIP has three key strands of scientific motivation and the requested simulations are designed to satisfy their needs: (1) pre-industrial and historical simulations (formally part of the common set of CMIP6 experiments) to enable model evaluation, (2) idealized coupled and partially coupled simulations with 1 % per year increases in CO 2 to enable diagnosis of feedback strength and its components, (3) future scenario simulations to project how the Earth system will respond to anthropogenic activity over the 21st century and beyond. This study documents in detail these simulations, explains their rationale and planned analysis, and describes how to set up and run the simulations. Particular attention is paid to boundary conditions, input data, and requested output diagnostics. It is important that modelling groups participating in C4MIP adhere as closely as possible to this experimental design.

54 ENVIRONMENTAL SCIENCES↗

Estimating heterotrophic respiration at large scales: challenges, approaches, and next steps

Heterotrophic respiration (HR), the aerobic and anaerobic processes mineralizing organic matter, is a key carbon flux but one impossible to measure at scales significantly larger than small experimental plots. This impedes our ability to understand carbon and nutrient cycles, benchmark models, or reliably upscale point measurements. Given that a new generation of highly mechanistic, genomic-specific global models is not imminent, we suggest that a useful step to improve this situation would be the development of "Decomposition Functional Types" (DFTs). Analogous to plant functional types (PFTs), DFTs would abstract and capture important differences in HR metabolism and flux dynamics, allowing models to efficiently group and vary these characteristics across space and time. We argue that DFTs should be initially informed by top-down expert opinion, but ultimately developed using bottom-up, data-driven analyses, and provide specific examples of potential dependent and independent variables that could be used. We present and discuss an example clustering analysis to show how model-produced annual HR can be broken into distinct groups associated with global variability in biotic and abiotic factors, and demonstrate that these groups are distinct from already-existing PFTs. A similar analysis, incorporating observational data, could form a basis for future DFTs. Finally, we suggest next steps and critical priorities: collection and synthesis of existing data; more in-depth analyses combining open data with high-performance computing; rigorous testing of analytical results; and planning by the global modeling community for decoupling decomposition from fixed site data. These are all critical steps to build a foundation for DFTs in global models, thus providing the ecological and climate change communities with robust, scalable estimates of HR at large scales.

carbon cycle↗

Biological and Environmental Research Exascale Requirements Review. An Office of Science review sponsored jointly by Advanced Scientific Computing Research and Biological and Environmental Research, March 28-31, 2016, Rockville, Maryland

Understanding the fundamentals of genomic systems or the processes governing impactful weather patterns are examples of the types of simulation and modeling performed on the most advanced computing resources in America. High-performance computing and computational science together provide a necessary platform for the mission science conducted by the Biological and Environmental Research (BER) office at the U.S. Department of Energy (DOE). This report reviews BER’s computing needs and their importance for solving some of the toughest problems in BER’s portfolio. BER’s impact on science has been transformative. Mapping the human genome, including the U.S.-supported international Human Genome Project that DOE began in 1987, initiated the era of modern biotechnology and genomics-based systems biology. And since the 1950s, BER has been a core contributor to atmospheric, environmental, and climate science research, beginning with atmospheric circulation studies that were the forerunners of modern Earth system models (ESMs) and by pioneering the implementation of climate codes onto high-performance computers. See http://exascaleage.org/ber/ for more information.

54 ENVIRONMENTAL SCIENCES↗

Landscape Characterization and Representativeness Analysis for Understanding Sampling Network Coverage

Sampling networks rarely conform to spatial and temporal ideals, often comprised of network sampling points which are unevenly distributed and located in less than ideal locations due to access constraints, budget limitations, or political conflict. Quantifying the global, regional, and temporal representativeness of these networks by quantifying the coverage of network infrastructure highlights the capabilities and limitations of the data collected, facilitates upscaling and downscaling for modeling purposes, and improves the planning efforts for future infrastructure investment under current conditions and future modeled scenarios. The work presented here utilizes multivariate spatiotemporal clustering analysis and representativeness analysis for quantitative landscape characterization and assessment of the Fluxnet, RAINFOR, and ForestGEO networks. Results include ecoregions that highlight patterns of bioclimatic, topographic, and edaphic variables and quantitative representativeness maps of individual and combined networks.

54 ENVIRONMENTAL SCIENCES↗