Search NASA⌕ Search

Engineering topics

Hogle, Susan

Publications and source records attributed to Hogle, Susan.

Probing Optimal Reaction Energy for Synthesis of Element 119 from 51 V+ 248 Cm Reaction with Quasielastic Barrier Distribution Measurement

Here, the quasielastic barrier distribution of 51 V+ 248 Cm was extracted by measuring the excitation function of quasielastic backscattering using a gas-filled recoil ion separator, GARIS-III. The obtained barrier distribution is well explained by the coupled-channels calculation, indicating a significant effect of the rotational excitation of deformed 248 Cm. From the measured average Coulomb barrier height and deformation parameters of 248 Cm, the side-collision energy leading to a compact configuration of colliding nuclei was obtained. The relation between the side collision energy and the excitation function of the evaporation-residue cross sections in the 48 Ca+ 248 Cm system was evaluated as a reference for the 51 V+ 248 Cm case. The optimal reaction energy to synthesize a new element 119 at the 51 V+ 248 Cm fusion reaction (3n and 4n channels) was estimated with an aid of these experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrodeposition method development for Californium Rare Isotope Breeder Upgrade (CARIBU) Source

Electrodeposition is one of the most widely utilized techniques for thin-film production with high yields. Although it is used extensively, this technique still presents several issues limiting its usefulness, including excess thickness and frequent cracking of deposited films. Efforts to improve thin-film production recently undertaken at Oak Ridge Laboratory by the authors have included studying operating conditions and applied electrolytes. Samarium was used as a surrogate material for californium, and yield was compared with different deposition condition. The final procedure from the optimized condition will be applied during production of the californium-252 source for the Californium Rare Isotope Breeder Upgrade (CARIBU) project, and the fission fragment will be analyzed.

07 ISOTOPE AND RADIATION SOURCES↗

Production of Cf-252 and other transplutonium isotopes at Oak Ridge National Laboratory

In 1957 Glenn T. Seaborg conceived and advocated for the construction of the High Flux Isotope Reactor (HFIR) and the Transuranium Processing Plant (since then renamed the Radiochemical Engineering Development Center, or REDC) at Oak Ridge National Laboratory. There, heavily shielded hot cells, glove boxes, and laboratories allow recovery of transuranium elements produced in substantial quantities. Seaborg’s vision of HFIR and REDC producing milligram quantities of berkelium, californium, and einsteinium has been fulfilled beginning in 1966 through May 2019 with 78 production campaigns yielding a cumulative totals of 1.2 g of 249 Bk, 10.2 g of 252 Cf, 39 mg of 253 Es, and 15 pg of 257 Fm. Notably, 252 Cf is a neutron source used in many industrial applications including oil exploration; process control systems for the cement industry, coal analysis, and power production; sources to start nuclear reactors and perform nondestructive materials analyses; homeland security and national defense detection devices; and medical research. Isotopes made available through transplutonium production at HFIR/REDC have enabled scientists to study the nuclear properties and reactions, chemical properties, optical properties, and solid-state properties of transplutonium elements. Long-lived isotopes have served as targets in heavy ion accelerators to produce heavier elements leading to the discovery of 104 Rf, 105 Db, 106 Sg, 113 Nh, 114 Fl, 115 Mc, 116 Lv, 117 Ts, and 118 Og. This paper reviews the evolution of the processing flowsheets to produce, separate, and purify transplutonium isotopes, which have evolved over 50 years of operation at HFIR and REDC, and summarizes directions of future work to improve the efficiency of the production operations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Workshop on Nuclear Data Needs for Nonproliferation

Recently, the National Nuclear Security Agency, Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D) hosted the Nuclear Data Roadmapping and Enhancement Workshop (NDREW). This workshop brought together nuclear data experts, data users, and program leads to discuss nuclear data needs for the nonproliferation mission and to recommend a path forward. Results of this workshop will lead to a comprehensive nonproliferation nuclear data strategic document. This paper provides historical context, summarizes workshop discussions, and provides recommendations by the nuclear data community for a comprehensive nuclear data program.

Romano, Catherine↗