Search NASA⌕ Search

Engineering topics

Holland, Patrick L.

Publications and source records attributed to Holland, Patrick L..

At least 19 records

Iron( IV ) alkyl complexes: electronic structure contributions to Fe–C bond homolysis and migration reactions that form N–C bonds from N 2

High-valent iron alkyl complexes are rare, as they are prone to Fe–C bond homolysis. Here, we describe an unusual way to access formally iron(IV) alkyl complexes through double silylation of iron(I) alkyl dinitrogen complexes to form an NNSi 2 group. Spectroscopically validated computations show that the disilylehydrazido(2−) ligand stabilizes the formal iron(IV) oxidation state through a strongly covalent Fe–N π-interaction, in which one π-bond fits an “inverted field” description. This means that the two bonding electrons are localized more on the metal than the ligand, and thus an iron(II) resonance structure is a significant contributor, similar to the previously-reported phenyl analogue. However, in contrast to the phenyl complex which has an S = 1 ground state, the ground state of the alkyl complex is S = 2, which places one electron in the π* orbital, leading to longer and weaker Fe–N bonds. The reactivity of these hydrazido(2−) complexes is dependent on the steric and electronic properties of the specific alkyl group. When the alkyl group is the bulky trimethylsilylmethyl, the formally iron(IV) species is stable at room temperature and no migration of the alkyl ligand is observed. However, the analogous complex with the smaller methyl ligand does indeed undergo migration of the carbon-based ligand to the NNSi 2 group to form a new N–C bond. This migration is followed by isomerization of the hydrazido ligand, and the product exists as two isomers that have distinct η 1 and η 2 binding of the hydrazido group. Lastly, when the alkyl group is benzyl, the Fe–C bond homolyzes to give a three-coordinate hydrazido(2−) complex which is likely due to the greater stability of a benzyl radical compared to that for methyl or trimethylsilylmethyl. These studies demonstrate the availability of a hydrocarbyl migration pathway at formally iron(IV) centers to form new N–C bonds directly to N 2 , though product selectivity is highly dependent on the identity of the migrating group.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Well-Defined Iron Sites in Crystalline Carbon Nitride

Carbon nitride materials can be hosts for transition metal sites, but Mössbauer studies on iron complexes in carbon nitrides have always shown a mixture of environments and oxidation states. Here we describe the synthesis and characterization of a crystalline carbon nitride with stoichiometric iron sites that all have the same environment. The material (formula C 6 N 9 H 2 Fe 0.4 Li 1.2 Cl, abbreviated PTI/FeCl 2 ) is derived from reacting poly(triazine imide)·LiCl (PTI/LiCl) with a low-melting FeCl 2 /KCl flux, followed by anaerobic rinsing with methanol. X-ray diffraction, X-ray absorption and Mössbauer spectroscopies, and SQUID magnetometry indicate that there are tetrahedral high-spin iron(II) sites throughout the material, all having the same geometry. As a result, the material is active for electrocatalytic nitrate reduction to ammonia, with a production rate of ca. 0.1 mmol cm –2 h –1 and Faradaic efficiency of ca. 80% at −0.80 V vs RHE.

Anions↗

Dinitrogen Binding and Functionalization from a Low-Coordinate Alkynyliron Complex

Alkynyl complexes of low-coordinate transition metals offer a sterically open environment and interesting bonding opportunities. Here, in this work, we explore the capacity of iron(I) alkynyl complexes to bind N 2 and isolate a N 2 complex including its X-ray crystal structure. Silylation of the N 2 complex gives an isolable, formally iron(IV) complex with a disilylhydrazido(2−) ligand, but natural bond orbital analysis indicates that an iron(II) formulation is preferable. The structure of this compound is similar to an earlier reported phenyl complex in which phenyl migration forms a new N–C bond, but the alkynyl group does not migrate. DFT calculations are used to test the possible reasons why the alkynyl is resistant to migration, and these show that the large Fe–C bond energy in the alkynyl complex is a factor that could contribute to the lack of migration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of Nitrogen-Carbon Bond Formation from Iron(IV) Disilylhydrazido Intermediates during N 2 Reduction

We recently reported a reaction sequence that activates C–H bonds in simple arenes as well as the N–N triple bond in N 2 , delivering the aryl group to N 2 to form a new N–C bond ( Nature 2020 , 584, 221). This enables the transformation of abundant feedstocks (arenes and N 2 ) into N-containing organic compounds. The key N–C bond forming step occurs upon partial silylation of N 2 . However, the pathway through which reduction, silylation, and migration occurred was unknown. Here, in this work, we describe synthetic, structural, magnetic, spectroscopic, kinetic, and computational studies that elucidate the steps of this transformation. N 2 must be silylated twice at the distal N atom before aryl migration can occur, and sequential silyl radical and silyl cation addition is a kinetically competent pathway to a formally iron(IV)–NN(SiMe 3 ) 2 intermediate that can be isolated at low temperature. Kinetic studies show its first-order conversion to the migrated product, and DFT calculations indicate a concerted transition state for migration. The electronic structure of the formally iron(IV) intermediate is examined using DFT and CASSCF calculations, which reveal contributions from iron(II) and iron(III) resonance forms with oxidized NNSi 2 ligands. The depletion of electron density from the Fe-coordinated N atom makes it electrophilic enough to accept the incoming aryl group. This new pathway for the N–C bond formation offers a method for functionalizing N 2 using organometallic chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dinitrogen Binding and Functionalization

This chapter presents fundamental aspects of the coordination chemistry of N 2 , including structure, spectroscopy, reactivity, and catalysis. We start by comparing and contrasting the binding of N 2 with the isoelectronic CO ligand that is familiar to organometallic chemists, and show that though they are isolobal, there are significant differences. We also describe the numerous practical considerations to bear in mind when preparing, studying, and interpreting the properties and reactions of N 2 complexes, and include pitfalls from the perspective of practitioners. The different binding modes and reactions of N 2 complexes are tabulated, giving representative examples of various complexes and reactions. Formation of new bonds between N 2 and H sources such as protons and H 2 , as well as multiatomic groups containing Si, C, and B, give insight into the status of the field and opportunities for the future.

ammonia↗

Coupling dinitrogen and hydrocarbons through aryl migration

A persistent challenge in chemistry is to activate abundant molecules such as hydrocarbons and atmospheric N 2 , because these compounds are often inert. In particular, forming C–N bonds from N 2 typically requires a reactive organic precursor, which limits the ability to design catalytic cycles. In this article, we report an diketiminate-supported iron system that is able to sequentially activate benzene and N 2 , forming aniline derivatives. The key to this new coupling reaction is the partial silylation of a reduced iron-N 2 complex, which is followed by migratory insertion of a benzene-derived phenyl group to the nitrogen. Further reduction releases the nitrogen products, and the iron product can re-enter the resulting cyclic pathway. Using a mixture of sodium powder, crown ether, and trimethylsilyl bromide, an easily prepared diketiminate iron bromide complex can mediate the one-pot conversion of several petroleum-derived liquid compounds into the corresponding silylated aniline derivatives using N 2 as the nitrogen source. Numerous compounds along the cyclic pathway have been isolated and crystallographically characterized; their reactivity outlines the mechanism including the hydrocarbon activation step and the N 2 functionalization step. This new strategy incorporates nitrogen atoms from N 2 directly into abundant hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dinitrogen Reduction to Ammonium at Rhenium Utilizing Light and Proton-Coupled Electron Transfer

The direct scission of the triple bond of dinitrogen (N 2 ) by a metal complex is an alluring entry point into the transformation of N 2 to ammonia (NH 3 ) in molecular catalysis. Reported herein is a pincer-ligated rhenium system that reduces N 2 to NH 3 via a well-defined reaction sequence involving reductive formation of a bridging N 2 complex, photolytic N 2 splitting, and proton-coupled electron transfer (PCET) reduction of the metal–nitride bond. The new complex (PONOP)ReCl 3 (PONOP = 2,6-bis(diisopropylphosphinito)pyridine) is reduced under N 2 to afford the trans,trans-isomer of the bimetallic complex [(PONOP)ReCl 2 ] 2 (μ-N 2 ) as an isolable kinetic product that isomerizes sequentially upon heating into the trans,cis and cis,cis isomers. All isomers are inert to thermal N 2 scission, and the trans,trans-isomer is also inert to photolytic N 2 cleavage. In striking contrast, illumination of the trans,cis and cis,cis-isomers with blue light (405 nm) affords the octahedral nitride complex cis-(PONOP)Re(N)Cl 2 in 47% spectroscopic yield and 11% quantum yield. The photon energy drives an N 2 splitting reaction that is thermodynamically unfavorable under standard conditions, producing a nitrido complex that reacts with SmI 2 /H 2 O to produce a rhenium tetrahydride complex (38% yield) and furnish ammonia in 74% yield.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isolation and characterization of a high-spin mixed-valent iron dinitrogen complex

Here, we report a rare example of a mixed-valence iron compound with an FeNNFe core, which gives insight into the structural, spectroscopic, and magnetic influences of single-electron reductions and oxidations. In the new compound, the odd electron is localized as judged from Mössbauer spectra at 80 K and infrared spectra at room temperature, and the backbonding into the N 2 unit is intermediate between diiron(I) and diiron(0) congeners. Magnetic susceptibility and relaxation studies on the series of FeNNFe compounds show significant magnetic anisotropy, but through-barrier pathways enable fairly rapid magnetic relaxation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Beyond fossil fuel–driven nitrogen transformations

Nitrogen is fundamental to all of life and many industrial processes. The interchange of nitrogen oxidation states in the industrial production of ammonia, nitric acid, and other commodity chemicals is largely powered by fossil fuels. Here, a key goal of contemporary research in the field of nitrogen chemistry is to minimize the use of fossil fuels by developing more efficient heterogeneous, homogeneous, photo-, and electrocatalytic processes or by adapting the enzymatic processes underlying the natural nitrogen cycle. These approaches, as well as the challenges involved, are discussed in this Review.

09 BIOMASS FUELS↗

A [3Fe-4S] cluster is required for tRNA thiolation in archaea and eukaryotes

The sulfur-containing nucleosides in transfer RNA (tRNAs) are present in all three domains of life; they have critical functions for accurate and efficient translation, such as tRNA structure stabilization and proper codon recognition. The tRNA modification enzymes ThiI (in bacteria and archaea) and Ncs6 (in archaea and eukaryotic cytosols) catalyze the formation of 4-thiouridine (s 4 U) and 2-thiouridine (s 2 U), respectively. The ThiI homologs were proposed to transfer sulfur via cysteine persulfide enzyme adducts, whereas the reaction mechanism of Ncs6 remains unknown. In this, we show that ThiI from the archaeon Methanococcus maripaludis contains a [3Fe-4S] cluster that is essential for its tRNA thiolation activity. Furthermore, the archaeal and eukaryotic Ncs6 homologs as well as phosphoseryl-tRNA (Sep-tRNA):Cys-tRNA synthase (SepCysS), which catalyzes the Sep-tRNA to Cys-tRNA conversion in methanogens, also possess a [3Fe-4S] cluster similar to the methanogenic archaeal ThiI. These results suggest that the diverse tRNA thiolation processes in archaea and eukaryotic cytosols share a common mechanism dependent on a [3Fe-4S] cluster for sulfur transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Mechanism of N–N Double Bond Cleavage by an Iron(II) Hydride Complex

The use of hydride species for substrate reductions avoids strong reductants, and may enable nitrogenase to reduce multiple bonds without unreasonably low redox potentials. Here in this work, we explore the N=N bond cleaving ability of a high-spin iron(II) hydride dimer with concomitant release of H 2 . Specifically, this diiron(II) reacts with azobenzene (PhN=NPh) to perform the fourelectron reduction to two imido groups, where two electrons come from H 2 reductive elimination and the other two come from iron oxidation. The rate law of the H 2 releasing reaction indicates that diazene binding occurs prior to H 2 elimination, and the negative entropy of activation and inverse kinetic isotope effect indicate that H-H bond formation is the rate-limiting step. Thus, substrate binding causes reductive elimination of H 2 that formally reduces the metals, and the metals use the additional two electrons to cleave the N-N multiple bond.

36 MATERIALS SCIENCE↗