Engineering topics
Homa, Daniel
Publications and source records attributed to Homa, Daniel.
Behavior of the Fused Quartz Suspended Core Acoustic Waveguide Sensor in Gamma Radiation
Previously, a fused-quartz acoustic waveguide named the suspended core waveguide with tight-field confinement in a small diameter was developed and its sensing potential in harsh environment was demonstrated with the fabricated periodic acoustic fiber Bragg grating. In this paper, the acoustic sensor was exposed to around 70 Gy/h gamma radiation at room temperature for 3550 h at Oak Ridge National Laboratory. For comparisons, a thermocouple and two optical fiber Bragg gratings were tested under the same conditions. The central frequency reading of the acoustic sensor was found to encounter a relatively fast decrease of 0.5 kHz in the first 800 hours. The reading then became stable, centering at 478.5 kHz with a fluctuation of ±0.2 kHz, and responded to small environmental temperature variations less than 1.2 °C. The major effect to the fluctuation was concluded to be radiation-induced material compaction and expansion. For optical fiber Bragg gratings, the same one-directional fast change of readings in the first 500 hours were observed as well. Although the optical gratings were able to track temperature changes, they also showed continuous drifts. The survivability and consistency of the acoustic sensor under long-term gamma radiation could lead to new sensing methods in nuclear applications.
Heat-induced drift reduction of time of flight in fused quartz acoustic waveguides via annealing process
High temperature structural acoustic sensors play an important role in many applications. Fused quartz waveguide is a popular choice due to its resistance to harsh environments and its convenience of modification. However, time of flight between pulse and echo, which is widely used in these sensors, tends to encounter drifts in fast temperature changing process even after temperature returns to initial value. In this article, different annealing process are performed for a special modified fused quartz waveguide with a sensor node. Annealing treatment is found able to reduce the drift when the waveguide undergoes a sudden temperature spike to 1000 °C at 500 kHz operating acoustic frequency, and the best annealing condition could make the drift one magnitude smaller. A following temperature test up to 1000 °C shows consistent measurement readings.
Thermally induced emission from hydroxyl groups in fused silica optical fibers
Not Available
Fully integrated fused quartz acoustic horns for structural health monitoring
Non-destructive acoustic structural sensing is an imperative technology, applicable to many different fields such as aerospace and civil engineering. To maintain a high sensitivity or to mitigate acoustic loss, it is important to increase the signal-to-noise ratio by improving coupling efficiency from acoustic sources to the object under test, such as an acoustic waveguide. Here, a fully integrated fused quartz horn design is combined with a fused quartz acoustic waveguide. The resulting system is intended to demonstrate a high accuracy low cost alternative to current sensing systems and the present article report on the viability of using a merged acoustic horn and waveguide.
Reduced Mode Sapphire Optical Fiber and Sensing System
This is the final technical report for the Virginia Tech Center for Photonics Technology (VT-CPT) research project entitled “Reduced Mode Sapphire Optical Fiber and Sensing System”. The objective of the five-year effort was to develop a low modal volume (LMV) single crystal sapphire fiber and demonstrate its advantages in current state-of-the-art sapphire-based temperature sensors and in novel distributed ultra-high temperature sensing systems. The project, sponsored by the Crosscutting Research Program, began in 2014 and had the original goal of developing the next generation of harsh environment sensing systems. After successfully completing the original scope of the award, the project was expanded and extended to allow for the development of harsh environment packaging and testing of a prototype sensor system. These novel fiber optic sensing technologies provide real-time, accurate, and reliable temperature measurements at distributed locations in existing coal-fueled electricity generating units to improve the overall performance, reliability, and flexibility of the nation’s coal-fired power plant fleet. In the final year (2018) of the project, prototype sensing systems were successfully deployed and operated in small commercial coal and natural gas fired boilers at the Virginia Tech Power Plant. The harsh environment quasi-distributed temperature sensing technology was advanced from a (Technology Readiness Level) TRL=1 to a TRL=7 by demonstrating the full validation of the sensing system prototype in a relevant industrial environment. The real-time, accurate and reliable monitoring of temperatures at distributed locations is expected to lower operating costs by allowing more accurate measurement of the harsh conditions inside a boiler system to better control its operation. The technologies developed by Virginia Tech’s Center for Photonics Technology will support the mission of the National Energy Technology Laboratory (NETL) to advance energy options to fuel our economy, strengthen our security, and improve the environment.
Acoustic modal analysis of unique fused-silica fibers for passive non-destructive structural monitoring
The goal of non-destructive acoustic sensing is to passively monitor innate structural parameters such as temperature, strain, and pressure. Intended for use in harsh structural environments, a distributed acoustic sensing system has been created using a single mode, radiation hardened, fused-silica core rod and a high-resolution acoustic sensor. This study aims to enhance the capabilities of the acoustic sensor by manipulating the fused-silica core rod, geometrically, to induce and control additional acoustic reflections. Here, two geometries are demonstrated to markedly improve upon previous fiber designs and result in a consistent acoustic profile.
Investigation of High Temperature Silica Based Fiber Optic Materials (Final Report)
This report summarizes technical progress during the program “Investigation of High Temperature Silica Based Fiber Optic Materials”, performed by the Center for Photonics Technology of the Bradley Department of Electrical and Computer Engineering at Virginia Tech. The objective of this program was to investigate and characterize the performance of commercially available optical fibers at elevated temperatures in replicated fuel gas streams. It also includes performing a comprehensive study of the interactions with the chemical constituents with respect to structural, optical, and mechanical stability and developing design strategies to assure reliable performance of deployed optical fibers and sensors. In the eight quarters of the project, work was done to complete the database of test results and findings for the creation of an optical fiber selection guide for high temperature applications. It is anticipated that this design tool will provide the scientific community with the information necessary to deploy sensing systems with the most robust and reliable fused silica optical fibers. Standard telecommunications grade germanium doped single and multimode fibers have been shown to perform reliably up to temperatures of 1100°C in non-hydrogen environments and/or properly designed sensor applications. Pure silica core single mode and low OH, large core step index multimode fibers, which have also shown to perform reliability up to temperatures of 1000ºC, are recommended for hydrogen and moist environments.
Observation of temperature dependence of the IR hydroxyl absorption bands in silica optical fiber
Explore the source record for details and available documents.
Design and analysis of large-core single-mode windmill single crystal sapphire optical fiber
We present a large-core single-mode “windmill” single crystal sapphire optical fiber (SCSF) design, which exhibits single-mode operation by stripping off the higher-order modes (HOMs) while maintaining the fundamental mode. The “windmill” SCSF design was analyzed using the finite element analysis method, in which all the HOMs are leaky. The numerical simulation results show single-mode operation in the spectral range from 0.4 to 2 μm in the windmill SCSF, with an effective core diameter as large as 14 μm. Such fiber is expected to improve the performance of many of the current sapphire fiber optic sensor structures.
Modal reduction in single crystal sapphire optical fiber
A new type of single crystal sapphire optical fiber (SCSF) design is proposed to reduce the number of guided modes via a highly dispersive cladding with a periodic array of high and low index regions in the azimuthal direction. The structure retains a “core” region of pure single crystal (SC) sapphire in the center of the fiber and a “cladding” region of alternating layers of air and SC sapphire in the azimuthal direction that is uniform in the radial direction. The modal characteristics and confinement losses of the fundamental mode were analyzed via the finite element method by varying the effective core diameter and the dimensions of the “windmill” shaped cladding. The simulation results showed that the number of guided modes were significantly reduced in the “windmill” fiber design, as the radial dimension of the air and SC sapphire cladding regions increase with corresponding decrease in the azimuthal dimension. It is anticipated that the “windmill” SCSF will readily improve the performance of current fiber optic sensors in the harsh environment and potentially enable those that were limited by the extremely large modal volume of unclad SCSF.
Temperature dependence of sapphire fiber Raman scattering
Anti-Stokes Raman scattering in sapphire fiber has been observed for the first time. Temperature dependence of Raman peaks’ intensity, frequency shift, and linewidth were also measured. Three anti-Stokes Raman peaks were observed at temperatures higher than 300°C in a 0.72-m-long sapphire fiber excited by a second-harmonic Nd YAG laser. The intensity of anti-Stokes peaks are comparable to that of Stokes peaks when the temperature increases to 1033°C. We foresee the combination of sapphire fiber Stokes and anti-Stokes measurement in use as a mechanism for ultrahigh temperature sensing.
Submicron diameter single crystal sapphire optical fiber
In this work, a submicron-diameter single crystal sapphire optical fiber was demonstrated via wet acid etching at elevated temperatures. Etch rates on the order 2.3 µm/hr were achievable with a 3:1 molar ratio sulfuric-phosphoric acid solution maintained at a temperature of 343°C. A sapphire fiber with an approximate diameter of 800 nm was successfully fabricated from a commercially available fiber with an original diameter of 50 µm. The simple and controllable etching technique provides a feasible approach to the fabrication of unique waveguide structures via traditional silica masking techniques. The ability to tailor the geometry of sapphire optical fibers is the first step in achieving optical and sensing performance on par with its fused silica counterpart.