Search NASA⌕ Search

Engineering topics

Hoppe, Dan

Publications and source records attributed to Hoppe, Dan.

13 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Preliminary Considerations for Microwave Consolidation/Sintering of Lunar Regolith Simulant

As NASA prepares to establish permanent habitats on the Moon, a significant first stepis to be able to land multiple times in the same area. As was consistently shown during the Apolloprogram, the very fine granular structure of the lunar regolith (the Moon’s “soil”) poses significantphysical and health challenges [1]. One of the most concerning is the hyper-velocity lunarsurface ejecta that results from the engine exhaust that exits the rocket as it lands and takes off[2]. It has been determined that to mitigate this, the regolith must be consolidated.

Shulman, Holly↗
NASA NTRS2017

Development of an Ultra-wide band Receiver for the North America Array

The North America Array (NAA), also known as the next-generation Very Large Array (ngVLA), is a concept for a radio astronomical interferometric array operating in the frequency range 1.2 GHz to 116 GHz and designed to provide substantial improvements in sensitivity, angular resolution, and frequency coverage while reducing operational costs compared to the current Jansky Very Large Array (JVLA). At JPL, we are designing a single receiver package designed to operate across the 8 to 48 GHz frequency range, in contrast to the current JVLA, which covers this frequency range with five receiver packages. Reducing the number of receiving systems required to cover the full frequency range would reduce operating costs. We are developing a prototype integrated feed-receiver package with a system noise temperature that meets the requirements of the ngVLA/NAA primary science programs, with a design that meets the requirement of low long-term operational costs. The receiver package being developed at JPL consists of a feed horn, low-noise amplifier (LNA), and down-converters to analog intermediate frequencies. We report on the status of this receiver package development.

Lazio, Joseph↗
NASA NTRS2006

Advanced Ka-Band Transceiver With Monopulse Tracking

A proposed Ka-band transmitting/ receiving system would embody a unique combination of established and semi-proven design features. The proposed system (see figure) would include a monopulse receiving feedback loop and a mirror that could be moved by piezoelectric actuators in the feedback loop to adjust the aim of the transmitted and received radio beams. Unlike in a phased-array tracking system, phase shifters (which can be complex and expensive) would not be needed in this monopulse tracking system. Moreover, the monopulse-tracking loop could be combined with other subsystems used in established subreflector and antenna designs. The final transmitter power amplifier in the proposed system would be a quasi-optical power amplifier (QOPA) -- a combination of a planar array of 25 amplifiers and corresponding planar arrays of antenna elements, such that free-space power combining would take place at the output.

Khan, Abdur↗
NASA NTRS2005

HEBS and Binary 1-sinc masks simulations, HCIT experiments and results

Based on preliminary experiments and results with a binary 1-sinc mask in the HCIT early in August 2004, we planned for a detailed experiment to compare the performance of HEBS and Binary masks under nearly identical conditions in the HCIT. This report details the design and fabrication of the masks, simulated predictions, and experimental results.

HCIT↗
NASA NTRS2003

Engineered Carbon Nanotube Materials for High-Q Nanomechanical Resonators

This document represents a presentation offered by the Jet Propulsion Laboratory, with assistance from researchers from Brown University and Northrop Grumman. The presentation took place in Seoul, Korea in July 2003 and attempted to demonstrate the fabrication approach regarding the development of high quality factor (high-Q) mechanical oscillators (in the forms of a tunable nanotube resonator and a nanotube array radio frequency [RF] filter) aimed at signal processing and based on carbon nanotubes. The presentation also addressed parallel efforts to develop both in-plane single nanotube resonators as well as vertical array power devices.

chemical vapor depositions↗
NASA NTRS1989

A square multiflare horn with 1-megawatt CW power-handling capability

The analysis and low-power testing of a square multiflare horn designed for 1-megawatt CW operation is described. Design considerations for the five-port input section are discussed. The required aperture modes are determined from radiation pattern considerations, and analysis of the multiflare section is carried out using mode matching. Measurements demonstrate that a circularly symmetric beam is produced with relatively low sidelobes.

Hoppe, Dan↗