Rationale: Position-specific (PS) δ 13 C values of propane have proven their ability to provide valuable information on the evolution history of natural gases. Two major approaches to measure PS δ 13 C values of propane are isotopic 13 C nuclear magnetic resonance (NMR) and gas chromatography-pyrolysis-gas chromatography-isotope ratio mass spectrometry (GC-Py-GC-IRMS). Measurement accuracy of the isotopic 13 C NMR has been verified, but the requirements of large sample size and long experimental time limit its applications. GC-Py-GC-IRMS is a more versatile method with a small sample size, but its accuracy has not been demonstrated. Methods: We measured the PS δ 13 C values of propane from nine natural gases using both 13 C NMR and GC-Py-GC-IRMS, then evaluated the accuracy of the GC-Py-GC-IRMS method. Results: The results show that large carbon isotope fractionations occurred for both terminal and central carbons within propane during pyrolysis. The isotope fractionations during the pyrolysis are reproducible at optimum conditions, but vary between the two GC-Py-GC-IRMS systems tested, affected by experimental conditions (e.g., pyrolysis temperature, flow rate, and reactor conditions). Conclusions: It is necessary to evaluate and calibrate each GC-Py-GC-IRMS system using propane gases with accurately determined PS δ 13 C values. Finally, this study also highlights a need for PS isotope standards for propane and other molecules (e.g., butane and acetic acid).

03 NATURAL GAS↗

DOE OSTI2023

Microwave-enhanced methane cracking for clean hydrogen production in shale rocks

Here, steam methane reforming (SMR) generates about 95% of hydrogen (H 2 ) in the U.S. using natural gas as a main feedstock. However, this technology also generates a large amount of carbon dioxide (CO 2 ), a major greenhouse gas causing global warming. Carbon capture and storage (CCS) technique is required, but the cost and safety of storing CO 2 underground are a concern. Here we propose a new approach using microwave/electromagnetic irradiation to produce clean hydrogen from unrecovered hydrocarbons within petroleum reservoirs. Solid carbon or CO 2 produced during this process will be simultaneously sequestrated underground without involving CCS. In this paper, we perform a series of experiments to investigate the in-situ hydrogen production from shale gas (methane) conversion by passing a methane stream through a packed shale rock sample heated by microwave. We found that methane conversion was significantly enhanced in the presence of Fe and Fe 3 O 4 particles as catalysts, with a conversion of 40.5% and 100% at reaction temperature of 500 °C and 600 °C, respectively. Methane conversion is promoted at a lower reaction temperature by the catalytic effect of minerals in shale. Additionally, the influences of catalysts, shale rock, and methane flow rate are characterized.

08 HYDROGEN↗

DOE OSTI2022

Bulk and intramolecular carbon isotopic compositions of hydrocarbon gases from laboratory pyrolysis of oil shale of the Green River Formation: Implications for isotope structures of kerogens

Not provided.

Energy & Fuels↗

DOE OSTI2022

Low 13 C- 13 C abundances in abiotic ethane

Distinguishing biotic compounds from abiotic ones is important in resource geology, biogeochemistry, and the search for life in the universe. Stable isotopes have traditionally been used to discriminate the origins of organic materials, with particular focus on hydrocarbons. However, despite extensive efforts, unequivocal distinction of abiotic hydrocarbons remains challenging. Recent development of clumped-isotope analysis provides more robust information because it is independent of the stable isotopic composition of the starting material. Here, we report data from a 13 C- 13 C clumped-isotope analysis of ethane and demonstrate that the abiotically-synthesized ethane shows distinctively low 13 C- 13 C abundances compared to thermogenic ethane. A collision frequency model predicts the observed low 13 C- 13 C abundances (anti-clumping) in ethane produced from methyl radical recombination. In contrast, thermogenic ethane presumably exhibits near stochastic 13 C- 13 C distribution inherited from the biological precursor, which undergoes C-C bond cleavage/recombination during metabolism. Further, we find an exceptionally high 13 C- 13 C signature in ethane remaining after microbial oxidation. In summary, the approach distinguishes between thermogenic, microbially altered, and abiotic hydrocarbons. The 13 C- 13 C signature can provide an important step forward for discrimination of the origin of organic molecules on Earth and in extra-terrestrial environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Kinetic and equilibrium reactions on natural and laboratory generation of thermogenic gases from Type II marine shale

The phenomenon that laboratory pyrolysis experiments produce much wetter gases than those in natural reservoirs is a long-recognized and debated problem in the investigation of natural gases in sedimentary basins. In this study, we explore the discrepancy by pyrolyzing a type II kerogen from the Woodford Shale in Oklahoma, compared with the previous results on the produced natural gases from the Arkoma Basin generated from the same source rock (Liu et al., 2019) with the discussion of gas and isotopic compositions at bulk and position-specific (PS) levels. An improved GC-pyrolysis-GC IRMS method is applied for the determination of PS δ 13 C of propane produced in the pyrolysis of the Woodford Shale at Easy %R o from 0.76 to 3.27. Kinetic and thermodynamic considerations of the chemical and isotopic compositions of the natural and laboratory pyrolysis gases suggest that the generation of light hydrocarbons involves uni-directional cracking reactions, exchange reactions with water, and likely reversible reactions among light hydrocarbons and other H-containing volatiles. After the gas generation in the unconventional Woodford Shale reservoirs, the C 1 -C 4 gases might have approached close to chemical equilibrium of C 1 -C 3 and isotope equilibrium of C 2 -C 1 and C 3 -C 1 pairs at their peak temperatures. The capping H for the generation of C 1 -C 4 in the Woodford Shale gases appears to have experienced at least partial exchange with the water, while that in the pyrolysis gases is only originated from organic-bound compounds with large kinetic isotope effects (KIE). Our findings indicate that elevated compound-specific and PS δ 13 C values of propane in the wet-gas cracking stage are significantly influenced by the breakdown of the thermally stable compounds (e.g., remaining kerogen, residues). A first synthesis of PS δ 13 C and δ 2 H isotopic compositions of propane from this study and the literature data suggests relatively similar isotopic structures of propane precursors in kerogens. Finally, this study demonstrates that PS isotope analysis of propane can contribute to identifying various geological (e.g., maturation, wet-gas cracking, H exchange, diffusion) and biodegradation processes.

58 GEOSCIENCES↗

DOE OSTI2022

Gas generation and intramolecular isotope study in laboratory pyrolysis of the Springfield coal from the Illinois Basin

Position-specific (PS) isotopes of propane have been proposed as a potential geochemical tool to decipher various geological processes (e.g., thermal cracking, biodegradation, H exchange) in natural reservoirs. The limited studies have been conducted on the PS isotopes of propane from the pyrolysis gases from marine shales, and natural gases sourced from lacustrine and marine kerogens, but little is known on gases produced from the humic kerogen. Here, this study investigated the PS δ 13 C of propane in the closed-system pyrolysis of the Springfield coal, Illinois Basin, Indiana, at 310 to 470 °C (Easy %Ro: 0.76 to 3.07). The C kinetic isotope effect (KIE) of CH 4 produced in both this study and previous low-temperature pyrolysis of the same coal indicates the cleavage of C—O bonds is the main generation pathway at the early kerogen cracking stage, followed by the breakdown of alkyl groups. At the wet-gas cracking stage, C 3 H 8 production from thermally stable compounds has a significant influence on the bulk and position-specific C KIE in the pyrolysis of marine Woodford kerogen and Springfield coal. According to the PS δ 13 C of propane, the central site is likely more enriched in 13 C and the δ 13 C of the terminal site is relatively heterogeneous within the propyl group attached to different functional groups of the gas-prone kerogen. Our findings based on the pyrolysis experiments and natural gas samples indicate thermal cracking and biodegradation appear to alter the δ 13 C cen values more significantly than the δ 13 C ter values of propane. The larger magnitude of ΔC c-t in the kMC simulations (Peterson et al., 2018) compared with those from the marine shale and coal possibly implies the non-random distributions of 13 C of propane precursors in the kerogens. As a new dimension of intramolecular isotopic information of propane, the PS δ 13 C values can contribute to fingerprinting the gas origins and identifying the various geological processes (e.g., kerogen cracking, wet-gas cracking, microbial activities) in sedimentary basins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Position-specific isotope effects during alkaline hydrolysis of 2,4-dinitroanisole resolved by compound-specific isotope analysis, 13 C NMR, and density-functional theory

Compound-specific isotope analysis (CSIA), position-specific isotope analysis (PSIA), and computational modeling (e.g., quantum mechanical models; reactive-transport models) are increasingly being used to monitor and predict biotic and abiotic transformations of organic contaminants in the field. However, identifying the isotope effect(s) associated with a specific transformation remains challenging in many cases. We describe and interpret the position-specific isotope effects of C and N associated with a SN 2 Ar reaction mechanism by a combination of CSIA and PSIA using quantitative 13 C nuclear magnetic resonance spectrometry, and density-functional theory, using 2,4-dinitroanisole (DNAN) as a model compound. The position-specific 13 C enrichment factor of O–C 1 bond at the methoxy group attachment site (ε C1 ) was found to be approximately -41‰, a diagnostic value for transformation of DNAN to its reaction products 2,4-dinitrophenol and methanol. Theoretical kinetic isotope effects calculated for DNAN isotopologues agreed well with the position-specific isotope effects measured by CSIA and PSIA. This combination of measurements and theoretical predictions demonstrates a useful tool for evaluating degradation efficiencies and/or mechanisms of organic contaminants and may promote new and improved applications of isotope analysis in laboratory and field investigations.

13C NMR↗

DOE OSTI2021

Kinetics of propane cracking and position-specific isotope fractionation: Insights into the origins of natural gases

Not provided.

Geochemistry & Geophysics↗

DOE OSTI2021

Intra-Molecular Isotope Study of Light Hydrocarbons

Light hydrocarbons (C 1 -C 10 ) are the largest fraction of petroleum hydrocarbons and some of the most ubiquitous and mobile fluids within sedimentary basins. It has been increasingly recognized that hydrocarbons of varying chain-lengths can be stable even under mantle conditions and that their fluxes may play a key role in the carbon dynamics of the Earth. Major formation mechanisms of these light hydrocarbons include microbial, thermogenic, and abiogenic origins. Despite their proven utility, conventional approaches using the bulk or global stable isotopes of light hydrocarbons are often not sufficient to distinguish their sources (particularly, biogenic vs. abiogenic), maturation stages/temperatures, and migration-degradation processes. Most natural compounds, including light hydrocarbons, are composed of a set of diverse isotopic molecules that differ in the number of isotopic substitutions and/or positions of isotopic substitution within a given molecules. Many of light hydrocarbon molecules contain hydrogen and carbon in energetically non-equivalent positions: isotopomers or position-specific (intra-molecular) isotope fractionation. Position-specific isotopic compositions can differ due either to equilibrium or to path-dependent kinetic or biological processes. Thus, the position-specific isotopic fractionation between different carbon and hydrogen positions within a single molecular compound could be used regardless of their reactants and other products. We hypothesize that the formation, transport and degradation processes of light hydrocarbons in the subsurface induce and control significant, perhaps unique position-specific 13 C/ 12 C and 2 H/ 1 H isotope fractionation. In this proposal, we propose to develop a new dimension in stable isotope geochemistry of light hydrocarbons: intra-molecular isotope study of light hydrocarbons. The specific objectives of our proposal include: (a) develop robust and routine quantitative nuclear magnetic resonance (NMR) methods for high-precision/high-accuracy isotopomer analysis of propane and other light hydrocarbons (C 3 -C 10 ), (b) gain a first clear picture on position-specific δ 2 H and δ 13 C values of select light hydrocarbons of both natural and industrial sources, including samples of natural gases (C 3 and possibly C 4 -C 5 ) collected from select sedimentary basins with conventional and unconventional reservoirs, (c) acquire information on position-specific 13 C/ 12 C and 2 H/ 1 H isotope fractionation of light hydrocarbons in key natural processes (thermogenic formation and oxidative degradation) based on well-controlled laboratory experiments, and (d) establish a general framework for interpreting/modeling position-specific 13 C/ 12 C and 2 H/ 1 H isotope compositions of light hydrocarbons. Intra-molecular isotope study of light hydrocarbons is expected to open up great potentials that the bulk and position-specific isotope fractionation of light hydrocarbons, in combination with mathematical/theoretical kinetic models, could provide unprecedented wealth of information on the sources, transport, and sinks of light hydrocarbons in sedimentary basins and deep Earth.

03 NATURAL GAS↗

DOE OSTI2020

Equilibrium carbon isotope fractionation factors of hydrocarbons: Semi-empirical force-field method

Here, we have calculated the reduced partition function ratios for carbon isotopes (β-factor) of 67 hydrocarbons (alkanes, alkenes, alkynes, cycloalkanes, and aromatics), including their 267 single-substituted isotopomers. The calculations were performed using the harmonic oscillator – rigid rotator model and the Urey / Bigeleisen-Mayer approach. Normal frequencies of molecular vibrations of the isotopologues were calculated from the molecular structures data and valence field force constants stored in the Light-handled Elucidation of Vibrations (LEV) database elaborated by Dr. Gribov and his colleagues in Russia. The LEV database is constructed from experimental spectroscopic and structural data by solving inverse problems of molecular vibrations. The LEV is internally consistent and the most comprehensive database available to date. The β-factor were calculated in the temperature range of 200–800 K with a 10 K step. Our calculations predict that the β-factors increase with an increasing number of C atoms within the same groups of hydrocarbons (e.g., alkanes). Our calculations also show a general descending order of 13 C enrichments among the different groups of hydrocarbons: cycloalkanes, aromatics, alkenes (double bonds) and isoalkanes, alkanes, alkynes (triple bonds). Position-specific, intramolecular isotope effects within hydrocarbons are determined by the β-factors of C in the different functional groups in the order: quaternary (C), tertiary (methine, CH), secondary (methylene, CH 2 ), primary (methyl, CH 3 ) and double bond (C=C), saturated bond (C - C), triple bond (HC≡). Our calculations on bulk and position-specific carbon isotope β-factors of the hydrocarbons, which are generally consistent with very limited ab initio calculations in the literature, are internally consistent and the most comprehensive to date for future applications to position-specific isotope geochemistry of hydrocarbons.

58 GEOSCIENCES↗

DOE OSTI2020

Bulk and position-specific isotope geochemistry of natural gases from the Late Cretaceous Eagle Ford Shale, south Texas

Here, a dataset of bulk and position-specific isotope compositions of shale gases from the Late Cretaceous Eagle Ford Shale, south Texas is reported. The chemical and bulk isotopic compositions of the seven samples in this study and those available from the literature show that across the play, produced natural gas from the Eagle Ford Shale preserves a wide range of gas compositions (wetness, ~5 to >90%) and δ 13 C values of C 1 –C 3 . The depth profiles of the isotopic compositions suggest that the western region of the Eagle Ford Shale deposit had experienced as much as 700–800 m of uplift-erosion or gas migration. The timing of and lost-gas fractions by gas expulsion events very likely affected their gas compositions and bulk isotope compositions. Some deep (>3000–3500 m), matured (%Ro > 1.5) gases with heavy δ 13 C(C 1 –C 3 ) values indicate significant loss (>50%) of the early-stage gases. For the position-specific isotope deviations of propane, the ΔC 2-1 values of the five samples show small decrease with well depths, while the ΔH 2-1 values have a general increasing trend. Although some samples fall very close to the equilibrium model trajectories with reasonable calculated temperatures (138–148 °C), the position-specific isotope compositions of propane from the Eagle Ford Shale gases are likely results of thermal cracking of various organic molecules within the source rocks, which have different activation energy for cracking and non-statistical distributions of C/H isotope within them.

58 GEOSCIENCES↗

DOE OSTI2020

Intramolecular 13 C isotope distributions of butane from natural gases

A single-step method allowing the measurement of 13 C intramolecular distribution of butane isomers (n- and i-butane) from natural gas samples was developed. The method builds up on the one that has been developed for propane, using on-line pyrolysis followed by isotope analysis of the pyrolytic fragments. The isotopic filiation between n-butane and its pyrolytic fragments was elucidated using samples spiked with 13 C on terminal positions. The isotopic filiation for i-butane could not be shown experimentally due to the lack of commercially available enriched i-butane. We thus used a recent model named Reaction Mechanism Generator (RMG) to assess the origin of the fragments arising from i-butane pyrolysis. Butanes from natural gas samples from the Carnarvon Basin (Australia) and the Arkoma Basin (USA) were analyzed. The results are consistent with a model for thermogenic natural gas generation and suggest that combined intramolecular isotope composition of propane and n-butane can be related to the gas maturity. In addition, the method allows the detection and shed light on the mechanism of n-butane and i-butane biodegradation in natural gas reservoirs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗