Search NASA⌕ Search

Engineering topics

Horta, L. G.

Publications and source records attributed to Horta, L. G..

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Static Testing of an Inflatable/Rigidizable Hexapod Structure

Scientific application of large space antennas and telescopes is fostering the study of ultralightweight and inflatable structures. These so-called gossamer structures are tightly packaged for launch and subsequent deployment. Of particular interest is a hexapod configuration often found in vehicle ride simulators, ground-based telescopes, and antennas. One such configuration was modeled and tested at NASA Langley. Discrepancies between dynamic test data and predictions from a finite element model prompted additional static testing. This paper discusses static tests that were conducted to update stiffness parameters in the finite element model.

Berger, K. T.↗
NASA NTRS2002

Description of New Inflatable/Rigidizable Hexapod Structure Testbed for Shape and Vibration Control

Larger and more powerful space based instruments are needed to meet increasingly sophisticated scientific demand. To support this need, concepts for telescopes with apertures of 100 meters are being investigated, but the required technologies are not in hand today. Due to the capacity limits of launch vehicles, the idea of deploying, erecting, or inflating large structures in space is being considered. Recently, rigidization concepts of large inflatable structures have demonstrated the capability of weight reductions of up to 50% from current concepts with packaging efficiencies near 80%. One of the important aspects of inflatable structures is vibration mitigation and line-of-sight control. Such control tasks are possible only after actuators/sensors are properly integrated into a rigidizable concept. To study these issues, we have developed an inflatable/rigidizable hexapod structure testbed. The testbed integrates state of the art piezo-electric self-sensing actuators into an inflatable/rigidizable structure and a flat membrane reflector. Using this testbed, we plan to experimentally demonstrate achievable vibration and line-of-sight control. This paper contains a description of the testbed and an outline of the test plan.

Adetona, O.↗
NASA NTRS1989

Learning control for slewing of a flexible panel

This paper studies the applicability of a discrete-time learning control method to the slewing control of a large flexible panel. Among the issues discussed are feasibility of the desired trajectories and their specification schemes, learning control by linear feedback, limitation of the actuator device output, and robustness to parameter changes or modeling errors associated with the chosen learning control design. To demonstrate the effectiveness of learning control, the system is designed with a proportional controller of the base angle only. Then application of the learning control is shown to make the system learn quickly to achieve the desired slewing without residual vibration at the end of the maneuver. Simulation results are reported and discussed.

Phan, M.↗
NASA NTRS1989

Actuator placement by degree of controllability including the effect of actuator mass

Various concepts of the degree of controllability (DOC) have been previously developed for the purpose of choosing actuator locations in the control of large flexible spacecraft. A perturbation technique is presented to efficiently account for the actuator mass in the computation of the fuel-optimal, time-optimal, and energy-optimal DOC definitions. Methods are developed for computing each of the three DOCs, when the mass of the actuator is nonnegligible. The energy-optimal DOC is employed to find optimal actuator locations for a large spacecraft under study by the NASA Langley Research Center. The mass of the actuator is seen to have a significant effect on the optimal actuator locations and is shown to spread the actuator locations more evenly for large mass actuators. Results indicate that when the actuator mass is large when compared to the structural mass it should be included in selecting actuator locations.

Longman, R. W.↗
NASA NTRS1986

Effects of atmosphere on slewing control of a flexible structure

Air drag forces are introduced into the equations for a slewing control maneuver of a flexible structure to assess the effects of atmosphere on the controller design. Simulated modal parameters and transient responses are compared with experiments in normal atmosphere and in vacuum. Analytical techniques for control laws are examined and verified. Physical insight into the air damping is gained so that results in vacuum can be extrapolated from results in air.

Juang, J.-N.↗
NASA NTRS1985

Identifying approximate linear models for simple nonlinear systems

This paper addresses the identification (realization) of approximate linear models from response data for certain nonlinear dynamic systems. Response characteristics for several typical nonlinear joints are analyzed mathematically and represented by series expansions. The parameters of the series expansion are then compared with the modal parameters of a linear model identified by the Eigensystem Realization Algorithm. The agreement of the identified model and the analytically derived representation is excellent for the cases studied. Also laboratory data from a model which exhibited stiffening behavior was analyzed using the Eigensystem Realization algorithm and Fast Fourier Transform. The laboratory experiment demonstrated the ability of the technique to recover the model characteristics using real data.

Horta, L. G.↗
NASA NTRS1985

A sequential linear optimization approach for controller design

A linear optimization approach with a simple real arithmetic algorithm is presented for reliable controller design and vibration suppression of flexible structures. Using first order sensitivity of the system eigenvalues with respect to the design parameters in conjunction with a continuation procedure, the method converts a nonlinear optimization problem into a maximization problem with linear inequality constraints. The method of linear programming is then applied to solve the converted linear optimization problem. The general efficiency of the linear programming approach allows the method to handle structural optimization problems with a large number of inequality constraints on the design vector. The method is demonstrated using a truss beam finite element model for the optimal sizing and placement of active/passive-structural members for damping augmentation. Results using both the sequential linear optimization approach and nonlinear optimization are presented and compared. The insensitivity to initial conditions of the linear optimization approach is also demonstrated.

Horta, L. G.↗
NASA NTRS1985

A slewing control experiment for flexible structures

A hardware set-up has been developed to study slewing control for flexible structures including a steel beam and a solar panel. The linear optimal terminal control law is used to design active controllers which are implemented in an analog computer. The objective of this experiment is to demonstrate and verify the dynamics and optimal terminal control laws as applied to flexible structures for large angle maneuver. Actuation is provided by an electric motor while sensing is given by strain gages and angle potentiometer. Experimental measurements are compared with analytical predictions in terms of modal parameters of the system stability matrix and sufficient agreement is achieved to validate the theory.

Juang, J.-N.↗
NASA NTRS1983

Nonlinear effect on modal data analysis method

How the presence of nonlinearities in structural test data can be detected when using modern linear modal data analysis methods is discussed. The extent to which linear algorithms can provide useful information on nonlinear systems was discussed. The modal data analysis method successfully identified the frequency components (but not damping) of the true solution of a nonlinear systems. It was found that the approximate modal parameters of the linear system can be identified by the modal method when low levels of nonlinearities are present. The modal method successfully identified the modal parameters of a linear mode in the presence of a nonlinear response.

Horta, L. G.↗
NASA NTRS1983

A study of the effects of a cubic nonlinearity on a modern modal identification technique

The effect of a geometric nonlinearity on the Ibrahim Time Domain (ITD) modal data analysis technique has been studied using two analytically derived models and one laboratory model. Response data for the three models were analyzed by the ITD method. Indicators of nonlinear response were found which include harmonically related frequencies with repetitive mode shapes, clusters of frequencies in a narrow band around each harmonic, and variations in frequency with amplitude of oscillation. Also,for the cases studied, the presence of a nonlinearity has no detrimental effect on identifying linear responses. A potential for applying the algorithm to the identification of a certain class of nonlinear system was indicated.

Horta, L. G.↗