Evaluation of Light-Off Limits for a Novel Oxy-Combustion Process for Advanced EOR.
Abstract Not Provided
Engineering topics
Publications and source records attributed to Houf, William G.
Abstract Not Provided
No abstract prepared.
No abstract prepared.
The use of risk information in establishing code and standard requirements enables: (1) An adequate and appropriate level of safety; and (2) Deployment of hydrogen facilities are as safe as gasoline facilities. This effort provides a template for clear and defensible regulations, codes, and standards that can enable international market transformation.
Abstract Not Provided
Abstract Not Provided
Abstract Not Provided
Abstract Not Provided
The summary of this presentation is: (1) Barrier walls are used to reduce setbacks by factor of 2; (2) We found no ignition-timing vs. over-pressure sensitivities for jet flow obstructed by barrier walls; (3) Cryogenic vapor cloud model indicates hazard length scales exceed the room-temperature release; validation experiments are required to confirm; (4) Light-up maps developed for lean limit ignition; flammability factor model provides good indication of ignition probability; and (5) Auto-ignition is enhanced by blunt-body obstructions - increases gas temperature and promotes fuel/air mixing.
Abstract Not Provided
No abstract prepared.
No abstract prepared.
Separation distances are used in hydrogen refueling stations to protect people, structures, and equipment from the consequences of accidental hydrogen releases. Specifically, hydrogen jet flames resulting from ignition of unintended releases can be extensive in length and pose significant radiation and impingement hazards. Depending on the leak diameter and source pressure, the resulting separation distances can be unacceptably large. One possible mitigation strategy to reduce exposure to hydrogen flames is to incorporate barriers around hydrogen storage, process piping, and delivery equipment. The effectiveness of barrier walls to reduce hazards at hydrogen facilities has been previously evaluated using experimental and modeling information developed at Sandia National Laboratories. The effect of barriers on the risk from different types of hazards including direct flame contact, radiation heat fluxes, and overpressures associated with delayed hydrogen ignition has subsequently been evaluated and used to identify potential reductions in separation distances in hydrogen facilities. Both the frequency and consequences used in this risk assessment and the risk results are described. The results of the barrier risk analysis can also be used to help establish risk-informed barrier design requirements for use in hydrogen codes and standards.
The development of a set of safety codes and standards for hydrogen facilities is necessary to ensure they are designed and operated safely. To help ensure that a hydrogen facility meets an acceptable level of risk, code and standard development organizations are tilizing risk-informed concepts in developing hydrogen codes and standards.
A need exists for developing codes and standards to support the wide-spread delivery of liquid hydrogen bulk fuel and fueling station storage. To develop these codes and standards the consequences of planned and unplanned hydrogen releases must be understood. The systems under consideration are mainly those used in supplying hydrogen for transportation. These systems include production storage tanks, tanker trucks and tanks located at vehicle fueling stations. Typically these systems store hydrogen in the saturated state at approximately 11 atmospheres. Storage vessels are heavily insulated and sometimes actively cooled to minimize the rate of hydrogen boil-off (intended hydrogen release).