Search NASA⌕ Search

Engineering topics

Houim, Ryan W.

Publications and source records attributed to Houim, Ryan W..

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A Scaling Analysis of Post-Detonation Mixing With Detailed Chemical Kinetics

This report documents a scaling study of hemispherical pentaerythritol tetranitrate explosives detonated in ambient air. The focus is on the mixing layer and evolution of the chemical species. The HyBurn code developed at the University of Florida is used to simulate center initiated 12, 38, 120, and 1200 mm diameter charges. The results show blast structures commonly found in the literature. Azimuthal averaging is used to radially average the flow variables to get mean values. The charges exhibit self-similar behavior at early times in a primarily gas dynamic regime, but discrepancies between the scales form at later times due to the finite rate chemistry. The turbulent mixing layer is calculated and used to define a region to conditionally average by mixture fraction. The results of the conditional averages imply a transition from a kinetic-limited regime to a mixing-limited regime with increasing scale. The scaling of the total heat release rate confirms an early time gas dynamic regime, and a later time regime where mixing and chemistry becomes impactful.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Reaction Mechanism for Carbon Soot in Post-Detonation Flows

This report documents the generation of a mechanism to predict the inclusion of carbon soot particles in a high explosive flow. The mechanism includes gasification and oxidation reactions, formation, sublimation, radiation, and agglomeration. Each part of the mechanism is derived from properties in the literature. The influence of each part of the mechanism is explored using simple, example simulations consisting of a 12 mm diameter 2,4,6-Trinitrotoluene charge detonated in ambient air. The mechanism has not been quantitatively compared to experiments. Additional efforts will be required to tune and validate it, which will require continued advancements in experimental diagnostics and simulation techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Generating Skeletal Chemical Reaction Mechanisms for Post-Detonation Flows

This report documents the generation of a skeletal chemical reaction mechanism for use with hemispherical pentaerythritol tetranitrate charges. Skeletal mechanisms can substantially reduce computation time while maintaining accuracy. The methodology within uses faster running sample simulations to build a representative thermodynamic state space. These thermodynamic states are used with a constant-volume reactor analysis and a reaction flow analysis to remove unimportant species and reactions from a full chemical reaction mechanism. For the given test case, this results in a 6x speedup in computation time for directly comparable simulations in 2D axisymmetric simulations. We see a 30x speedup in simulations in 3D Cartesian coordainates when compared to a prior full kinetics simulation. There is strong agreement between temperature and species mass fraction profiles between the full and skeletal chemical reaction mechanisms. These methodologies can be applied to any explosive, given the availability of sample simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Post-detonation fireball modeling: Validation of freeze out approximations

A numerical simulation study was performed to examine the post-detonation reaction processes produced by the detonation of a 12 mm diameter hemispherical pentaerythritol tetranitrate (PETN) explosive charge. The simulations used a finite rate detailed chemical reaction model consisting of 59 species and 368 reactions to capture post-detonation reaction processes including air dissociation from Mach 19+ shock waves that initially break out of the PETN charge, reactions within the detonation products during expansion, and afterburning when the detonation products mix with the shock heated air. The multi-species and thermodynamically complete Becker-Kistiakowsky-Wilson real-gas equation of state is used for the gaseous phase to allow for the mixing of reactive species. A recent simplified reactive burn model is used to propagate the detonation through the charge and allow for detailed post-detonation reaction processes. The computed blast, shock structures, and mole fractions of species within the detonation products agree well with experimental measurements. A comparison of the simulation results to equilibrium calculations indicates that the assumption of a local equilibrium is fairly accurate until the detonation products rapidly cool to temperatures in the range of 1500-1900 K by expansion waves. Below this range, the computed results show mole fractions that are nearly chemically frozen within the detonation products for a significant portion of expansion. In conclusion, these results are consistent with the freeze out approximation used in the blast modeling community.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Experimental and computational investigation into the hydrodynamics and chemical dynamics of laser ablation aluminum plasmas

Laser ablation plasma chemistry is governed by a complex interplay between hydrodynamic plasma-gas mixing processes, thermodynamics, and rapid high-temperature chemical reactions. Here, in this work, we investigate the gas-phase oxidation chemistry of ns-laser ablation aluminum plasmas in air using optical spectroscopy combined with advanced multi-physics modeling. Experimental measurements demonstrate the formation of AlO in the plasma plume as early as 1 μs while computational results reveal that several Al x O y species are distributed in the periphery of the plume at even earlier times (<20 ns) in the presence of large temperature gradients and strong shockwaves. Interactions with the ablation crater during rapid plume expansion are shown to initiate vortex formation, followed by mixing dynamics that work to pull AlO into the vortices to react with gas-phase Al to form Al 2 O. Oxygen and several aluminum oxides are simultaneously pulled up through the stem of the fireball, encouraging further intermixing between reacting species and enhanced molecular formation. This work concludes that chemical dynamics in laser ablation plasmas is driven by diffusion processes, concentration gradients, and plume hydrodynamics while strong shockwaves generated during laser ablation do not impede chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Advancing the science of explosive fragmentation and afterburn fireballs though experiments and simulations at the benchtop scale

Detonation of explosive devices produces extremely hazardous fragments and hot, luminous fireballs. Prior experimental investigations of these post-detonation environments have primarily considered devices containing hundreds of grams of explosives. While relevant to many applications, such large- scale testing also significantly restricts experimental diagnostics and provides limited data for model validation. As an alternative, the current work proposes experiments and simulations of the fragmentation and fireballs from commercial detonators with less than a gram of high explosive. As demonstrated here, reduced experimental hazards and increased optical access significantly expand the viability of advanced imaging and laser diagnostics. Notable developments include the first known validation of MHz-rate optical fragment tracking and the first ever Coherent Anti-Stokes Raman Scattering (CARS) measures of post-detonation fireball temperatures. While certainly not replacing the need for full-scale verification testing, this work demonstrates new opportunities to accelerate developments of diagnostics and predictive models of post-detonation environments.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗