Engineering topics

Housner, Stein

Publications and source records attributed to Housner, Stein.

18 records

DOE OSTI2024

Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC) (Cooperative Research and Development Final Report, CRADA Number: CRD-22-22968)

This work generated a first-of-its-kind automated workflow to couple time-domain simulations of wave energy converters written in one software language with a set of design generation and evaluation scripts written in another software language. This automated workflow used an existing optimization package to analyze the sensitivity of different design parameters on the power output of a specific WEC, iProTech’s Pitching Inertial Pump (PIP). Geometric, inertial, and power take-off variables were all varied and optimized to find values that produced the highest amount of power generated over varying wave conditions. The findings on these parameter sensitivity studies are used to inform future design iterations of the PIP WEC. Including more design variables in the optimizations will only increase computational run time and further software development is needed to analyze a larger optimization.

16 TIDAL AND WAVE POWER↗

DOE OSTI2024

Reference Site Conditions for Floating Wind Arrays in the United States

17 WIND ENERGY↗

DOE OSTI2024

Reference Site Condition Datasets for Floating Wind Arrays in the United States

Floating offshore wind farm design is highly site-specific, requiring detailed information about the specific conditions of a project area for realistic design studies. Unfortunately, publicly available site condition data for potential floating offshore wind project sites in the United States is scarce. To support U.S. offshore wind research, we developed reference site condition datasets, including metocean and seabed information, for four potential floating wind project areas in the U.S.: Humboldt Bay, Morro Bay, the Gulf of Maine, and the Gulf of Mexico. These datasets were compiled using publicly available data. Our metocean analysis, covering wind, waves, and surface currents, utilized measurement data from 2000 to 2020. Sources included the National Renewable Energy Laboratory’s National Offshore Wind Dataset for wind data, National Data Buoy Center buoys for wave data, and the High Frequency Radar Network for surface currents. These data were integrated into hourly time series used to compute extreme return periods up to 500 years, monthly statistics, and joint probability clusters for fatigue analysis. Soil conditions were evaluated using the usSEABED database and bathymetry grids were interpolated from the NCEI Digital Elevation Model Global Mosaic. Further information on the datasets and how they were created can be found in: Biglu, M., M. Hall, E. Lozon, S. Housner. 2024. Reference Site Conditions for Floating Wind Arrays in the United States. Golden, CO: National Renewable Energy Laboratory (NREL). NREL/TP-5000-89897. The data are also available at: https://github.com/FloatingArrayDesign/SiteConditions The content of each dataset is as follows: _NOW23_wind.txt: Hourly NOW-23 wind data up to a height of 400 meter. _metocean_1hr.txt: Hourly time series including wind, wave, surface current and temperature data. _Summary.xlsx: Metocean data, including extreme values, joint probability distributions and monthly statistics. _usSEABED_soil.csv: Extract of the usSEABED database for this specific site. _bathymetry_200m.txt (and 500m, 1000m): Gridded seabed depth data.

16 TIDAL AND WAVE POWER↗

DOE OSTI2024

Challenges and Opportunities for Floating Offshore Wind Energy in Ultradeep Waters of the Central Atlantic

This study, funded under an interagency agreement between the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) and Bureau of Ocean Energy Management (BOEM), is intended to provide BOEM with key information to inform their decision making about current and future leasing in the Central Atlantic region of the United States. The report will also benefit state governments, developers, research institutions, and the public which are seeking technical and market-based information about the unique aspects of the offshore wind energy development along the outer continental shelf of the Central Atlantic region of the United States. The study provides a broad top-level assessment of the key challenges and opportunities that are unique to offshore wind energy development in the Central Atlantic region. It focuses on BOEM's Central-Atlantic region Call areas. The research is based on the most current technology, deployment, and stakeholder information available to NREL. The topics include assessments of the physical environment, current leasing status and major stakeholder issues, state and federal energy policy, an assessment of future leasing requirements based on state targets, status and limitations of the technology, and supply chain status. The primary intent is to inform the readers about the prospects for deploying offshore wind in the designated deep water Call areas, E and F, identified by BOEM. The report makes recommendations regarding development in these regions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Representative Project Design Envelope for Floating Offshore Wind Energy: A Focus on the California 2023 Federal Leases

NREL developed recommendations for a representative project design envelope (RPDE) for floating offshore wind energy projects in the California lease areas, considering industry feedback from offshore wind farm developers. The RPDE provides estimates of minimum and maximum values for project design parameters that are relevant for assessing environmental impacts. The design envelope considers the practical range of technology options that may be deployed and accounts for major physical constraints, technology feasibility, and supply chain readiness. In addition to the RPDE, this report presents four scenarios that illustrate some of the differences between technologies that could be used offshore California, as well as descriptions of the typical installation processes that are expected to be used for floating offshore wind farms.

17 WIND ENERGY↗

DOE OSTI2024

Shared mooring system designs and cost estimates for wave energy arrays

For floating renewable energy devices to become more cost-efficient and commercially scalable, their mooring system designs must be low-cost and suited for large-scale installations. Large arrays of floating devices, such as wave energy converters (WECs), will likely be designed with an individual mooring system for each device in the array. However, new mooring technology advancements provide options to use shared mooring lines to connect adjacent devices to one another, reducing the total number of anchors in the array, thereby reducing material use and cost. Here, this paper explores the design, modeling, and cost analysis of shared mooring systems for various sizes of arrays consisting of heaving oscillating water column (OWC) WECs. Shared mooring systems for WEC arrays sized in 2 x N and N x N grid layouts are designed to meet the relevant design standards, checking their performance with a nonlinear time-domain dynamic simulation, and the costs of each are calculated and compared. Several assumptions are taken in the design process to produce efficient results, providing a preliminary optimization for guidance on design decisions rather than a full, detailed design analysis. Mooring system costs per WEC were found to decrease as the number of WECs in the array increase, up to certain array sizes. The 2 x 3 array had the lowest mooring system cost per WEC out of all arrays considered, with a 60% cost reduction relative to using individual mooring systems. The 3 x 3 and 4 x 4 arrays achieved a 50% cost per WEC reduction. In addition to these significant cost reductions, the shared mooring system designs can provide advantages through smaller mooring system footprints, lower installation times, and less seabed disturbance.

16 TIDAL AND WAVE POWER↗

DOE OSTI2024

The IEA Wind Task 49 Reference Floating Wind Array Design Basis

International Energy Agency Wind Technology Collaboration Programme (IEA Wind) Task 49 on Integrated Design of Floating Wind Arrays is an international collaboration aiming to advance the development of large-scale floating wind farms by providing open-access resources to the research and development and planning communities. The work of Task 49 focuses on array-level challenges related to the colocation of many floating wind turbines; their layouts, mooring systems, and cabling systems; failure risks; logistical considerations; marine spatial planning needs; and future research needs and innovation directions. This report provides a general design basis for the development of reference floating wind farm designs. These reference array designs will extend the scope of existing reference floating wind turbine designs to facilitate research on array-level floating wind technology challenges and innovations. The design basis promotes coordination and consistency in developing the reference array designs.

17 WIND ENERGY↗

DOE OSTI2024

Floating Wind Farm Layout Optimization Considering Moorings and Seabed Variations

This paper presents a method for optimizing the layout of floating wind farms that accounts for realistic seabed variations and the consequent adjustments to the mooring systems required for different turbine positions. The mooring lines of floating wind farms create large spatial constraints that are depth-dependent, since mooring designs must adapt to variations in seabed conditions over the array area. We develop a layout optimization methodology that addresses this, adjusting mooring system designs based on the local seabed characteristics as the layout changes and using steady-state models for the wake effects and mooring lines. The approach includes design algorithms that adjust the anchor positions and line length to achieve the desired mooring line profile for different water depths, and a layout optimization framework that implements spatial constraints between the turbines, mooring lines, and lease area boundaries. Demonstrating the method on several cases shows the effect of the seabed and spatial-constraint factors, as well as their interactions, on the optimal array layout. This demonstration paves the way for scaling up the method, using more powerful optimization algorithms to handle larger farm sizes and situations with more intensely varied seabed conditions.

17 WIND ENERGY↗

DOE OSTI2024

Levelized Cost of Energy Comparison of Floating Wind Farms With and Without Shared Anchors

As part of the Innovative Deep-Water Mooring Systems for Floating Wind Farms (DeepFarm) R&D project, led by Principle Power Inc., the National Renewable Energy Laboratory (NREL) performed an LCOE analysis to compare the changes in LCOE between floating wind farms with individual anchors versus shared anchors. This report presents a comparative analysis of the LCOE of two different wind farms with different mooring systems: one with taut mooring lines each connected to individual suction pile anchors, and one with taut mooring lines connected to shared anchors. A brief description of the methodology employed to conduct the LCOE comparison is given, including the underlying assumptions. Then, results are presented with a compilation of key findings.

16 TIDAL AND WAVE POWER↗

DOE OSTI2023

Review of TEAMER Awards for WEC-Sim Support: Preprint

Testing Expertise and Access for Marine Energy Research (TEAMER) is a U.S. Department of Energy Water Power Technologies Office sponsored program, overseen by the Pacific Ocean Energy Trust, which aims to advance the state of marine energy technologies. The program connects technology developers with experts at U.S. facilities, including numerical modeling and analysis facilities, like WEC-Sim. The WEC-Sim facility is supported by the WEC-Sim development team at Sandia National Laboratories and the National Renewable Energy Laboratory. WEC-Sim (Wave Energy Converter SIMulator) is an open-source software for simulating wave energy converters. WEC-Sim can model the multi-body dynamics of devices comprised of bodies, joints, power take-off systems, and mooring systems. Since TEAMER's first round of support in 2020, there have been eighteen TEAMER awards focused on numerical model development in WEC-Sim. TEAMER awards for WEC-Sim support have modeled a wide range of wave energy converter archetypes, including point absorbers, attenuators, oscillating water columns, and many other novel architectures. A wide variety of studies have been conducted, leading to important insights for TEAMER partners and software improvements for WECSim. This article highlights several successful WEC-Sim TEAMER awards. The awards described herein include TEAMER recipients Ocean Motion Technologies, AquaHarmonics, iProTech, East Carolina University, Virginia Tech, Maiden Wave Energy, and the University of Massachusetts Dartmouth. The awards of these seven partners contain a wide range of investigations and cover the creation of baseline hydrodynamic models, PTO modeling, geometry optimization in both boundary element methods and WECSim, and model tuning and validation.

industry support↗

DOE OSTI2023

PacWave Anchoring and Mooring Study

PacWave, with its location in some of the most energetic waters in the nation and a buildout to support grid-connected devices, is poised to become a leader in field testing of wave energy converters (WECs) at high technology readiness levels. As part of the device deployment and testing protocols at PacWave, the client is responsible for providing all mooring system components, since there are currently no mooring system components specified for PacWave. NREL and PNNL have been tasked with conducting a preliminary analysis of permanent or temporary mooring systems at the PacWave South site. Previous work for this task included a global trade study of mooring systems used for WECs, and a site characterization of PacWave South. This current report will use the results of the previous studies to inform the design of various mooring systems to be installed at PacWave, which will allow cost analyses to be performed to compare the costs of acquisition of these mooring systems and the costs of mooring systems designed specifically for clients' devices.

16 TIDAL AND WAVE POWER↗

DOE OSTI2022

Design and analysis of a ten-turbine floating wind farm with shared mooring lines

This paper discusses the development and analysis of a novel design for a 10-turbine floating wind farm with shared mooring lines. Shared mooring lines tether adjacent floating platforms together, reducing the number of anchors required but increasing system complexity. We present a systematic, multistage design process for shared mooring systems, involving linearized analysis of array layout options, quasi-static mooring line optimization, and design refinement based on coupled dynamic loads analysis. The design developed from this process is thought to represent one of the most advantageous shared-mooring configurations for this scale of floating wind array. It features perpendicular anchor line pairs and allows shared, multiline anchors, making it an example of a shared-mooring-and-anchor array. Comparing the performance and cost characteristics of the shared-mooring design with more conventional three-line individual mooring systems shows equivalent dynamic response characteristics and stationkeeping system cost savings of 25% when using shared mooring lines and shared anchors. The design is also advantageous in the case of a mooring line failure, with offsets and redundancy characteristics similar to four-line individual mooring systems.

17 WIND ENERGY↗

DOE OSTI2022

Seabed bathymetry and friction modeling in MoorDyn

This paper presents the implementation and verification of a seabed bathymetry feature and seabed friction feature to the open-source, lumped-mass mooring system dynamics modeler, MoorDyn, which is part of the National Renewable Energy Laboratory’s aero-hydro-servo-elastic simulation tool, OpenFAST. Variations in seabed slope, as well as the frictional effects of mooring lines moving along the seabed, will affect the mooring line tensions of a floating platform and the consequent platform response. These new features are especially relevant for modeling mooring systems in deep-water coastal areas where seabed depth can change significantly over an entire mooring footprint. The bathymetry feature models the seabed as a rectangular grid of variable water depths in place of the existing, uniform water depth in MoorDyn. The friction force is primarily represented as a Coulombic friction force, or the product of a kinetic friction coefficient and the seabed contact normal force, with the ability to differentiate between transverse and axial motion of a line node on the seabed in any bathymetry grid. These capabilities were tested by running MoorDyn and OpenFAST simulations over a variety of seabed and environmental conditions; the resulting fairlead tensions, node tensions, and mooring line kinematics were verified against equivalent OrcaFlex simulations. The results match closely, meaning the features are verified, which will increase the overall fidelity of OpenFAST and FAST.Farm simulations.

17 WIND ENERGY↗

DOE OSTI2022

RAFT (Response Amplitudes of Floating Turbines) [SWR-22-40]

RAFT is a Python code for frequency-domain analysis of floating wind turbines. RAFT works in the frequency domain to provide efficient computations of a floating wind system's response spectra accounting for platform hydrodynamics, quasi-static mooring reactions, rotor aerodynamics, and linearized control. It can be used to calculate response amplitude operators (RAO's), power spectral densities, mean/static properties, and response metrics based on mean and root-mean-square values of each output. RAFT serves as the Level 1 model in the WEIS (Wind Energy with Integrated Servo-control) toolkit, and features an OpenMDAO wrapper.

Hall, Matthew↗

DOE OSTI2022

TEAMER: FOSWEC Mooring Modeling and Analysis, Post Access Report and Data

Floating oscillating surge wave energy converters (FOSWECs) offer several advantages over bottom-hinged oscillating surge wave energy converters, including large wave potential at deep-water sites with fewer permitting and environmental concerns outside territorial waters. As a team, Stevens Institute of Technology, Virginia Tech and Resolute Marine Energy are designing a 100 kW FOSWEC with DOE support (2020-2021) for the PacWave test site "PacWave". The proposed FOSWEC consists of a floating platform, two pivoting flaps, and an innovative power-take-off (PTO). The distance between the two flaps is around half the typical wavelength, resulting in out-of-phase motion and a reduction in motion of the frame and mooring loads. The overall goal of the project is to design, build, deploy and analyze a 1:2 scale (100-kW annual averaged electrical power output) device with reduced levelized cost of energy (LCOE) and peak-to-average power ratio, through the co-design and control of the PTO, WEC, and floating platform. This submission includes a Post Access Report and data for the project of Mooring Modeling and Analysis for Floating Oscillating Surge Wave Energy Converter that Powers Marine Aquaculture of RFTS2 (request for technical support). The data are used to generate all figures in the Post Access Report. Project was a collaboration between Virginia Tech and the National Renewable Energy Lab, with funding from TEAMER.

16 TIDAL AND WAVE POWER↗

DOE OSTI2022

An Open-Source Frequency-Domain Model for Floating Wind Turbine Design Optimization

A new frequency-domain dynamics model has been developed that uses open-source components to efficiently represent a complete floating wind turbine system. The model, called RAFT (Response Amplitudes of Floating Turbines), incorporates quasi-static mooring reactions, strip-theory and potential-flow hydrodynamics, blade-element-momentum aerodynamics, and linear turbine control. The formulation is compatible with a wide variety of support structure configurations and no manual or time-domain preprocessing steps are required, making RAFT very practical in design and optimization workflows. The model is applied to three reference floating wind turbine designs and its predictions are compared with results from time-domain OpenFAST simulations. There is good agreement in mean offsets as well the statistics and spectra of the dynamic response, verifying RAFT’s general suitability for floating wind analysis. Follow-on work will include verification of potential-flow and turbine-control features and application to optimization problems.

17 WIND ENERGY↗

DOE OSTI2021

Linearized modeling and optimization of shared mooring systems

Shared mooring systems, where adjacent platforms are tethered directly to each other, can reduce anchor quantities and mooring line lengths in a floating array but also introduce new modeling and design challenges. This paper presents and demonstrates a first-order approach to modeling and designing shared mooring systems that simplifies these challenges. We formulate a general, linearized model for the force-displacement response of shared mooring systems, including inter-platform couplings. Using this linearization, we realize significant simplifications to the shared mooring system design problem and propose a corresponding design optimization approach. Finally, we demonstrate the complete approach on a variety of shared-mooring floating wind farm layouts with generic design assumptions and constraints. Some fundamental observations about shared mooring systems can be made from the results. Polygonal array layouts with perpendicular anchor positions appear to maximize shared mooring system efficiency. Also, arrays with greater levels of sharing tend to exhibit larger deviations in offsets between platforms. Overall, the results show how the linearized approach can be applied to efficiently evaluate and systematically optimize preliminary shared mooring system designs.

17 WIND ENERGY↗

DOE OSTI2021

MoorPy (Quasi-Static Mooring Analysis in Python)

MoorPy is a quasi-static mooring model and a suite of associated functions for mooring system analysis. The core model supports quasi-static analysis of moored floating systems including any arrangement of mooring lines and floating platforms. It solves the distributed position and tension of each mooring line segment using standard catenary equations. Floating platforms can be represented with linear hydrostatic characteristics. MoorPy automatically computes a floating system's equilibrium state and can be queried to identify a mooring system's nonlinear force-displacement relationships. Linearized stiffness matrices are efficiently computed using semi-analytic Jacobians. MoorPy also includes plotting functions and a library of mooring component property and cost coefficients. MoorPy can be used directly from Python scripts to perform mooring design and analysis tasks, or it can be coupled with other tools to compute quasi-static mooring reactions as part of a larger simulation.

Hall, Mathew↗