Howard, Kevin | Search NASA

NASA NTRS2017

Multilfiltration Bed Replacement (MFBR) System for the International Space Station using Aquaporin Membranes and Humidity Condensate Ersatz Wastewater

The Multifiltration Bed system in the International Space Station (ISS) Water Processor Assembly (WPA) needs to be improved by reducing or eliminating the usage rate of expendable media, removing dimethylsilanediol (DMSD), and reducing the overall system mass. The WPA contains two multifiltration beds, each with a mass of approximately 50 kg. Reducing the mass of the WPA is an important part of evolving the ISS system for future exploration missions. The Multifiltration Bed Replacement (MFBR) technology is based on biomimetic membranes, which derive their unique characteristics from aquaporins, or water channel proteins. Aquaporin membranes were commercialized by the company Aquaporin AS. Tests were conducted using the Aquaporin Inside Hollow Fiber Module to determine the maximum water recovery ratio and membrane life. Samples were analyzed for total organic carbon (TOC), DMSD, acetate, ions, and volatiles such as ethanol and acetone. The results indicate that at a 97.498.1 water recovery ratio, the membrane module can reject approximately 50 of the TOC and specific conductance using the simulated ISS MSFC humidity condensate ersatz. Additionally, the life of the membrane was determined to be a minimum of 7103 hours.

humidity condensate ersatz↗

NASA NTRS2016

Results of the FY15 Brine Evaporation Bag (BEB) Technology Down-Select Testing

The Brine Evaporation Bag (BEB) recently participated in the Brine Concentrator Technology (BCT) Technology Down-Select (TDS). It was found that the BEB System is able to process ISS (International Space Station) Alternate Pretreat Brine at a rate high enough for ISS application as well as future deep space missions. The BEB System is also capable of processing the brine to a solid residue which will add to the stability and safety of storing the brine residue. The results of the BEB testing for the BCT-TDS will be presented in this paper.

recycling↗

NASA NTRS2016

Development of the Continuous-Fill Brine Evaporation Bag (BEB) System

The existing water recovery system on the International Space Station (ISS) is limited to 70 percent reclamation; consequently, long duration space missions are currently unfeasible due to the large quantity of water necessary to sustain the crew. The Brine Evaporation Bag (BEB) is a proposed system to supplement the existing water recovery system aboard the ISS and future deep space missions that can increase water recovery to 99 percent. The BEB project previously focused on the development of only the bag portion of the system. This paper focuses on the development of the BEB Evaporator. It will discuss the work to understand, optimize, and improve the entire BEB system while implementing a continuous-fill process. The results of that development and the advantages and limitations of the continuous-fill process will be presented.

Water Recovery↗

NASA NTRS2016

Results of the FY15 Brine Evaporation Bag (BEB) Technology Down-Select Testing

The Brine Evaporation Bag (BEB) recently participated in the Brine Concentrator Technology (BCT) Technology Down-Select (TDS). It was found that the BEB System is able to process ISS (International Space Station) Alternate Pretreat Brine at a rate high enough for ISS application as well as future deep space missions. The BEB System is also capable of processing the brine to a solid residue which will add to the stability and safety of storing the brine residue. The results of the BEB testing for the BCT-TDS will be presented in this paper.

Delzeit, Lance↗

NASA NTRS2016

Development of the Auto-Fill Brine Evaporation Bag (BEB) System

The existing water recovery system on the International Space Station (ISS) is limited to 70 percent reclamation; consequently, long duration space missions are currently unfeasible due to the large quantity of water necessary to sustain the crew. The Brine Evaporation Bag (BEB) is a proposed system to supplement the existing water recovery system aboard the ISS and future deep space missions that can increase water recovery to 99 percent. The BEB project previously focused on the development of only the bag portion of the system. This paper focuses on the development of the BEB Evaporator. It will discuss the work to understand, optimize, and improve the entire BEB system while implementing a continuous-fill process. The results of that development and the advantages and limitations of the continuous-fill process will be presented.

Delzeit, Lance↗

NASA NTRS2015

Results for the Brine Evaporation Bag (BEB) Brine Processing Test

The recent Brine Processing Test compared the NASA Forward Osmosis Brine Dewatering (FOBD), Paragon Ionomer Water Processor (IWP), UMPQUA Ultrasonic Brine Dewatering System (UBDS), and the NASA Brine Evaporation Bag (BEB). This paper reports the results of the BEB. The BEB was operated at 70 deg C and a base pressure of 12 torr. The BEB was operated in a batch mode, and processed 0.4L of brine per batch. Two different brine feeds were tested, a chromic acid-urine brine and a chromic acid-urine-hygiene mix brine. The chromic acid-urine brine, known as the ISS Alternate Pretreatment Brine, had an average processing rate of 95 mL/hr with a specific power of 5kWhr/L. The complete results of these tests will be reported within this paper.

BEB↗

NASA NTRS2015

Evaluation of Brine Processing Technologies for Spacecraft Wastewater

Brine drying systems may be used in spaceflight. There are several advantages to using brine processing technologies for long-duration human missions including a reduction in resupply requirements and achieving high water recovery ratios. The objective of this project was to evaluate four technologies for the drying of spacecraft water recycling system brine byproducts. The technologies tested were NASA's Forward Osmosis Brine Drying (FOBD), Paragon's Ionomer Water Processor (IWP), NASA's Brine Evaporation Bag (BEB) System, and UMPQUA's Ultrasonic Brine Dewatering System (UBDS). The purpose of this work was to evaluate the hardware using feed streams composed of brines similar to those generated on board the International Space Station (ISS) and future exploration missions. The brine formulations used for testing were the ISS Alternate Pretreatment and Solution 2 (Alt Pretreat). The brines were generated using the Wiped-film Rotating-disk (WFRD) evaporator, which is a vapor compression distillation system that is used to simulate the function of the ISS Urine Processor Assembly (UPA). Each system was evaluated based on the results from testing and Equivalent System Mass (ESM) calculations. A Quality Function Deployment (QFD) matrix was also developed as a method to compare the different technologies based on customer and engineering requirements.

recycling↗

NASA NTRS2014

Continued Development of the Brine Evaporation Bag

The Brine Evaporation Bag (BEB) is a membrane-based bag system for the dewatering of brine. Previous studies showed the ability of the BEB to dewater brine at low temperatures with a 96 percent mass reduction. Additionally, a microgravity flight showed the BEB is microgravity compatible. Current work focuses on the effects of temperature, vacuum, purge gas flow rate, membrane area, and membrane permeability on the rate of dewatering within a vacuum oven configured to mimic the Heat Melt Compactor. Within this study, it was found that changing the temperature or level of vacuum would change the rate of dewatering. The purge gas, membrane area, and membrane permeability did not affect the dewater rate. The reason for this behavior may be that the dewatering is heat transfer limited, and out of all the parameters studied, only the temperature and vacuum have an effect on the heat transfer rate. The ISS (International Space Station) produces brine at a rate of 1.2 liters per day. This initial study showed that it is possible to remove water from a BEB at a rate of 1.6 liters per day in this breadboard configuration; even at moderate temperatures. Development of a dedicated BEB Evaporator will be discussed. In addition, it is further postulated that a specifically designed BEB Evaporator would result in an increased dewatering rate allowing for even lower operating temperatures or faster dewatering rates.

Recycling↗

NASA NTRS2004

An Evaluation of the Functionality of Advanced Fuel Research Prototype Dry Pyrolyzer for Destruction of Solid Wastes

The prototype dry pyrolyser delivered to Ames Research Center is the end-product of a Phase I1 Small Business Initiative Research (SBIR) project. Some of the major advantages of pyrolysis for processing solid wastes are that it can process solid wastes, it permits elemental recycling while conserving oxygen use, and it can function as a pretreatment for combustion processes. One of the disadvantages of pyrolysis is the formation of tars. By controlling the rate of heating, tar formation can be minimized. This paper presents data on the pyrolysis of various space station wastes. The performance of the pyrolyser is also discussed and appropriate modifications suggested to improve the performance of the dry pyrolyzer.

Fisher, John↗

NASA NTRS1993

A practical large scale/high speed data distribution system using 8 mm libraries

Eight mm tape libraries are known primarily for their small size, large storage capacity, and low cost. However, many applications require an additional attribute which, heretofore, has been lacking -- high transfer rate. Transfer rate is particularly important in a large scale data distribution environment -- an environment in which 8 mm tape should play a very important role. Data distribution is a natural application for 8 mm for several reasons: most large laboratories have access to 8 mm tape drives, 8 mm tapes are upwardly compatible, 8 mm media are very inexpensive, 8 mm media are light weight (important for shipping purposes), and 8 mm media densely pack data (5 gigabytes now and 15 gigabytes on the horizon). If the transfer rate issue were resolved, 8 mm could offer a good solution to the data distribution problem. To that end Exabyte has analyzed four ways to increase its transfer rate: native drive transfer rate increases, data compression at the drive level, tape striping, and homogeneous drive utilization. Exabyte is actively pursuing native drive transfer rate increases and drive level data compression. However, for non-transmitted bulk data applications (which include data distribution) the other two methods (tape striping and homogeneous drive utilization) hold promise.

Howard, Kevin↗

NASA NTRS1993

High-speed data duplication/data distribution: An adjunct to the mass storage equation

The term 'mass storage' invokes the image of large on-site disk and tape farms which contain huge quantities of low- to medium-access data. Although the cost of such bulk storage is recognized, the cost of the bulk distribution of this data rarely is given much attention. Mass data distribution becomes an even more acute problem if the bulk data is part of a national or international system. If the bulk data distribution is to travel from one large data center to another large data center then fiber-optic cables or the use of satellite channels is feasible. However, if the distribution must be disseminated from a central site to a number of much smaller, and, perhaps varying sites, then cost prohibits the use of fiber-optic cable or satellite communication. Given these cost constraints much of the bulk distribution of data will continue to be disseminated via inexpensive magnetic tape using the various next day postal service options. For non-transmitted bulk data, our working hypotheses are that the desired duplication efficiency of the total bulk data should be established before selecting any particular data duplication system; and, that the data duplication algorithm should be determined before any bulk data duplication method is selected.

Howard, Kevin↗