Search NASA⌕ Search

Engineering topics

Howard, Richard

Publications and source records attributed to Howard, Richard.

30 records · Page 2

The Evolution of HFIR Cermet PU-238 Production Targets

The production of 238Pu as a heat generation source for radioisotope thermoelectric generators (RTGs) was ongoing at the Savannah River Site (SRS) from the 1960s-1990s. Stockpiles of this valuable radioisotope have decreased over the last few decades and it is clear that more material must be produced to support future deep space exploration missions. The Oak Ridge National Laboratory (ORNL) has initiated efforts to establish a reliable production facility to replenish this resource. Like the SRS, ORNL uses a mechanically pressed ceramic/metallic (cermet) pellet that blends 237Np (in the form of ceramic NpO2 powder) and aluminum powder. A “Generation I” target containing 52 such pellets has been qualified for irradiation at the High Flux Isotope Reactor at the ORNL reservation. The next “Generation II” target design incorporates lessons learned from the initial qualification exercise to develop a further optimized irradiation vehicle design. This paper discussed the evolution of the cermet targets at ORNL and provides details on the Generation II design.

Howard, Richard↗

Nuclear Science User Facilities Irradiation Capabilities at Oak Ridge National Laboratory

The Nuclear Science User Facilities (NSUF) within the Department of Energy (DOE) Office of Nuclear Energy offer researchers the opportunity to access world-class nuclear facilities at no cost to the user. Oak Ridge National Laboratory (ORNL) offers users access to the High Flux Isotope Reactor (HFIR) in addition to a wide variety of post-irradiation examination facilities. The ORNL irradiation engineering team has compiled a large number of successful designs for irradiating nuclear fuel and material specimens. NSUF users can leverage these existing designs to significantly reduce the time, cost, and risk of failure when designing new irradiation experiments. This work summarizes some of the irradiation experiment designs and capabilities that have been developed at ORNL in the hope that this information will help improve future NSUF proposals and inspire new ideas for irradiations that can be performed in the HFIR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of High Temperature Out-of-Pile Experiments for Testing Nuclear Thermal Propulsion Fuel Surrogates

Nuclear thermal propulsion (NTP) technology is designed to provide “in-space” vehicle propulsion by deriving thrust from a hydrogen working fluid that is heated from a nuclear reaction. Initial NTP fuel structures (primarily carbon/carbide based materials) developed by the Rover/NERVA program were designed to withstand temperatures exceeding 2400 K and remain intact after tens of firing cycles. Current programs responsible for development of this technology expect the fuels to withstand temperatures in excess of 2550K under a similar duty cycle. Experiments that subject fuels to these conditions are being developed to provide data and performance information for optimization and potential down-selection of the candidate materials. Initial tests will be designed for laboratory benchtop operation and will not expose surrogate specimens to the hydrogen working fluid or irradiation fields. The primary focus of these out-of-pile experiments will be to study thermal performance and thermal failure limits of the candidate specimen materials.

Howard, Richard↗

Evaluation on the Effect of Composition on Radiation Hardening and Embrittlement in Model FeCrAl Alloys

This report details the findings of post-radiation mechanical testing and microstructural characterization performed on a series of model and commercial FeCrAl alloys to assist with the development of a cladding technology with enhanced accident tolerance. The samples investigated include model alloys with simple ferritic grain structure and two commercial alloys with minor solute additions. These samples were irradiated in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) up to nominal doses of 7.0 dpa near or at Light Water Reactor (LWR) relevant temperatures (300-400 C). Characterization included a suite of techniques including small angle neutron scattering (SANS), atom probe tomography (APT), and transmission based electron microscopy techniques. Mechanical testing included tensile tests at room temperature on sub-sized tensile specimens. The goal of this work was to conduct detailed characterization and mechanical testing to begin establishing empirical and/or theoretical structure-property relationships for radiation-induced hardening and embrittlement in the FeCrAl alloy class. Development of such relationships will provide insight on the performance of FeCrAl alloys in an irradiation environment and will enable further development of the alloy class for applications within a LWR environment. A particular focus was made on establishing trends, including composition and radiation dose. The report highlights in detail the pertinent findings based on this work. This report shows that radiation hardening in the alloys is primarily composition dependent due to the phase separation in the high-Cr FeCrAl alloys. Other radiation induced/enhanced microstructural features were less dependent on composition and when observed at low number densities, were not a significant contributor to the observed mechanical responses. Pre-existing microstructure in the alloys was found to be important, with grain boundaries and pre-existing dislocation networks acting as defect sinks, resulting in variations in the observed microstructures after irradiation. Dose trends were also observed, with increasing radiation dose promoting changes in the size and number density of the Cr-rich α' precipitates. Based on the microstructural analysis, performed tensile testing, and prior knowledge from FeCr literature it was hypothesized that the formation of the Cr-rich α' precipitates could lead to significant radiation-induced embrittlement in the alloys, and this could be composition dependent, a result which would mirror the trends observed for radiation-induced hardening. Due to the limited database on embrittlement in the FeCrAl alloy class after irradiation, a series of radiation experiments have been implemented. The overarching point of view within this report is the radiation tolerance of FeCrAl is complex, with many mechanisms and factors to be considered at once. Further development of the FeCrAl alloy class for enhanced accident tolerant applications requires detailed, single (or at least limited) variable experiments to fully comprehend and predict the performance of this alloy in LWRs. This report has been submitted as fulfillment of milestone M2FT-15OR0202321 titled, Summary report on the effect of composition on the irradiation embrittlement of Gen 1 ATF FeCrAl for the Department of Energy Office of Nuclear Energy, Advanced Fuel Campaign of the Fuel Cycle R&D program.

36 MATERIALS SCIENCE↗

Fabrication Control Plan for ORNL RH-LOCA ATF Test Specimens to be Irradiated in the ATR

The purpose of this fabrication plan is (1) to summarize the design of a set of rodlets that will be fabricated and then irradiated in the Advanced Test Reactor (ATR) and (2) provide requirements for fabrication and acceptance criteria for inspections of the Light Water Reactor (LWR) – Accident Tolerant Fuels (ATF) rodlet components. The functional and operational (F&OR) requirements for the ATF program are identified in the ATF Test Plan. The scope of this document only covers fabrication and inspections of rodlet components detailed in drawings 604496 and 604497. It does not cover the assembly of these items to form a completed test irradiation assembly or the inspection of the final assembly, which will be included in a separate INL final test assembly specification/inspection document. The controls support the requirements that the test irradiations must be performed safely and that subsequent examinations must provide valid results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Video Guidance Sensor and Time-of-Flight Rangefinder

A proposed video guidance sensor (VGS) would be based mostly on the hardware and software of a prior Advanced VGS (AVGS), with some additions to enable it to function as a time-of-flight rangefinder (in contradistinction to a triangulation or image-processing rangefinder). It would typically be used at distances of the order of 2 or 3 kilometers, where a typical target would appear in a video image as a single blob, making it possible to extract the direction to the target (but not the orientation of the target or the distance to the target) from a video image of light reflected from the target. As described in several previous NASA Tech Briefs articles, an AVGS system is an optoelectronic system that provides guidance for automated docking of two vehicles. In the original application, the two vehicles are spacecraft, but the basic principles of design and operation of the system are applicable to aircraft, robots, objects maneuvered by cranes, or other objects that may be required to be aligned and brought together automatically or under remote control. In a prior AVGS system of the type upon which the now-proposed VGS is largely based, the tracked vehicle is equipped with one or more passive targets that reflect light from one or more continuous-wave laser diode(s) on the tracking vehicle, a video camera on the tracking vehicle acquires images of the targets in the reflected laser light, the video images are digitized, and the image data are processed to obtain the direction to the target. The design concept of the proposed VGS does not call for any memory or processor hardware beyond that already present in the prior AVGS, but does call for some additional hardware and some additional software. It also calls for assignment of some additional tasks to two subsystems that are parts of the prior VGS: a field-programmable gate array (FPGA) that generates timing and control signals, and a digital signal processor (DSP) that processes the digitized video images. The additional timing and control signals generated by the FPGA would cause the VGS to alternate between an imaging (direction-finding) mode and a time-of-flight (range-finding mode) and would govern operation in the range-finding mode.

Bryan, Thomas↗

Global Positioning System Synchronized Active Light Autonomous Docking System

A Global Positioning System Synchronized Active Light Autonomous Docking System (GPSSALADS) for automatically docking a chase vehicle with a target vehicle comprises at least one active light emitting target which is operatively attached to the target vehicle. The target includes a three-dimensional array of concomitantly flashing lights which flash at a controlled common frequency. The GPSSALADS further comprises a visual tracking sensor operatively attached to the chase vehicle for detecting and tracking the target vehicle. Its performance is synchronized with the flash frequency of the lights by a synchronization means which is comprised of first and second internal clocks operatively connected to the active light target and visual tracking sensor, respectively, for providing timing control signals thereto, respectively. The synchronization means further includes first and second Global Positioning System receivers operatively connected to the first and second internal clocks, respectively, for repeatedly providing simultaneous synchronization pulses to the internal clocks, respectively. In addition, the GPSSALADS includes a docking process controller means which is operatively attached to the chase vehicle and is responsive to the visual tracking sensor for producing commands for the guidance and propulsion system of the chase vehicle.

Howard, Richard↗

More About Video-Feedback Docking System

Two documents provide additional information on system described in "Docking System With Video Feedback" (MFS-28421). First document, "Standard Remote Manipulator System Docking Target Augmentation For Automated Docking", emphasizes use of retroreflectors in target. Second document, "Development Of A Video-Based Automatic Rendezvous And Docking System", describes hardware and software of system. System is video-sensor/electronic-feedback control system. Video camera on active or chasing vehicle views target on passive or chased vehicle. Target illuminated by light-emitting diodes on active vehicle. Image-data-processing subsystem converts video image of target into data on relative position, orientation, linear velocity, and angular velocity of two vehicles. Data then used by maneuver-control subsystem to control approach of active vehicle to passive vehicle.

Howard, Richard↗

Video guidance sensor

A Martin-Marietta study comparing the application of laser, video, or RF sensors was conducted in 1982. The study concluded that video was the most attractive sensor (the video also could be used for operator monitoring). The Retro-Reflector field Tracker from the Solar Array Flight Experiment was chosen as a 'first generation' sensor and integrated with guidance algorithms for evaluation on the air-bearing vehicle. Results indicated that this sensor was not applicable for the noise environment posed by the multi-layer insulation used on most spacecraft. A 'second generation' sensor was developed to be used with a modified RMS target. This sensor utilized two sets of laser diodes to acquire three optically filtered targets. The targets were illuminated first with a 780 nanometer diode, followed by illumination with a 830 nm diode. The second digitized picture was subtracted from the first to get a low-noise image. The centroids of the retroreflectors were used then to uniquely derive target attitude and range. The sensor presently operates to 80 feet and within +/- 40 degrees in pitch and yaw. Sensor operability is a concern if the sun is within a +/- 40 degree cone angle to the target. The present sensor performance characteristics are less than 1 percent range error and less than 1 degree angle error. Future sensor development is anticipated to extend the operating range to 150 feet and reduce the cone angle of sensor inoperability to within +/- 10 degrees of direct sunlight. Performance improvements also are anticipated. TRW currently is developing a system that utilizes dual cameras with simultaneous diode illumination. Although further development is being pursued, the basic system has proven sound, and the sensor is essentially ready for application.

Howard, Richard↗