Search NASA⌕ Search

Engineering topics

Hoyt, C. L.

Publications and source records attributed to Hoyt, C. L..

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

A source of hard X-ray radiation based on hybrid X pinches

X pinches are well known to produce very small, dense plasma pinches (“hot spots”) that emit sub-nanosecond bursts of 1–8 keV radiation. Hard X-ray radiation in the range from 8 to 300 keV or more is also emitted, and only a small portion of which is associated with the X-pinch hot spot. In hybrid X-pinches (HXP), the 10 ns hard X-ray pulse is terminated by fast closure of the gap between the two conical electrodes of the HXP by rapidly expanding electrode plasmas. The temporal, spectral, and spatial properties of this higher energy radiation have been studied. This radiation was used for point-projection imaging with magnification between 1.5 and 6, and spatial resolution of 20–100 μ m was demonstrated..

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Investigation of radiative bow-shocks in magnetically accelerated plasma flows

We present a study of the formation of bow shocks in radiatively cooled plasma flows. This work uses an inverse wire array to provide a quasi-uniform, large scale hydrodynamic flow accelerated by Lorentz forces to supersonic velocities. This flow impacts a stationary object placed in its path, forming a well-defined Mach cone. Interferogram data are used to determine a Mach number of ∼6, which may increase with radial position suggesting a strongly cooling flow. Self-emission imaging shows the formation of a thin (<60 μm) strongly emitting shock region, where T{sub e} ∼ 40–50 eV, and rapid cooling behind the shock. Emission is observed upstream of the shock position which appears consistent with a radiation driven phenomenon. Data are compared to 2-dimensional simulations using the Gorgon MHD code, which show good agreement with the experiments. The simulations are also used to investigate the effect of magnetic field in the target, demonstrating that the bow-shocks have a high plasma β, and the influence of B-field at the shock is small. This consistent with experimental measurement with micro bdot probes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Dynamics of hybrid X-pinches

The dynamics of a new type of pinches—hybrid X-pinches (HXPs)—has been studied experimentally and numerically. The initial configuration of an HXP consists of a high-current diode with conical tungsten electrodes separated by a 1- to 3-mm-long gap and shunted with a 20- to 100-μm diameter wire. It was shown earlier that a hot spot (HS) with high plasma parameters also formed in the HXP, although its initial configuration is simpler than that of a standard X-pinch. Although details of the HXP dynamics still remain insufficiently studied, the main factors governing the HXP formation were investigated both experimentally and using magnetohydrodynamic simulations. The formation of a specific pressure profile in the electrode plasma after the wire explosion was investigated both experimentally and theoretically. It is shown that the effect of the pressure profile on the expanding wire plasma is similar for both standard X-pinches and HXPs, which allows one to assign them to the same class of loads of pulsed facilities. It is also established that the final stages of HS formation and the parameters of the HS plasma in standard X-pinches and HXPs are practically identical.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Hard X-rays from hybrid X pinches

X pinches are well known to produce very small, dense plasma pinches (“hot spots”) that emit short bursts of 1.5–8 keV radiation. Hard X-ray radiation in the 8–100 keV range is also emitted, only a small portion of which is associated with the X-pinch hot spot. In hybrid X-pinches, the “long” X-ray pulse is terminated by fast closure of the gap between the two conical electrodes by rapidly expanding electrode plasmas. The temporal, spectral, and spatial properties of this higher energy radiation, 10 – 60 keV, have been studied. This radiation was used for point-projection imaging with magnification between 1.5 and 3, and spatial resolution less than100 micrometers was demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Study of gas-puff Z-pinches on COBRA

Gas-puff Z-pinch experiments were conducted on the 1 MA, 200 ns pulse duration Cornell Beam Research Accelerator (COBRA) pulsed power generator in order to achieve an understanding of the dynamics and instability development in the imploding and stagnating plasma. The triple-nozzle gas-puff valve, pre-ionizer, and load hardware are described. Specific diagnostics for the gas-puff experiments, including a Planar Laser Induced Fluorescence system for measuring the radial neutral density profiles along with a Laser Shearing Interferometer and Laser Wavefront Analyzer for electron density measurements, are also described. The results of a series of experiments using two annular argon (Ar) and/or neon (Ne) gas shells (puff-on-puff) with or without an on- (or near-) axis wire are presented. For all of these experiments, plenum pressures were adjusted to hold the radial mass density profile as similar as possible. Initial implosion stability studies were performed using various combinations of the heavier (Ar) and lighter (Ne) gasses. Implosions with Ne in the outer shell and Ar in the inner were more stable than the opposite arrangement. Current waveforms can be adjusted on COBRA and it was found that the particular shape of the 200 ns current pulse affected on the duration and diameter of the stagnated pinched column and the x-ray yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗