Search NASA⌕ Search

Engineering topics

Hsieh, C -H

Publications and source records attributed to Hsieh, C -H.

Self-confined GaN heterophased quantum wells

Wurtzite/zinc-blende/wurtzite GaN heterophased quantum wells (QWs) were grown by plasma-assisted molecular beam epitaxy. A self-assembling mechanism was used to simulate the heterophased QW, in which a wurtzite/zinc-blende phase transition was created by rotating the threefold symmetric N-Ga vertical bond 60 deg. The GaN heterophased QW was attested by transmission electron microscopy, selective area electron diffraction and cathodoluminescence measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface modification of highly ordered TiO{sub 2} nanotube arrays for efficient photoelectrocatalytic water splitting

An efficient visible-light-sensitive heterostructure photoanode of CdS nanoparticles/ZnO shell/TiO{sub 2} nanotube (CdS/ZnO-TiNT) arrays were investigated for solar water splitting. Highly ordered arrays of TiNT were grown vertically on Ti foil by electrochemical anodization. Both aqueous solution routes were used in turn to coat a thin recombination barrier of ZnO shell and narrow band gap CdS nanoparticles to the surface of the TiNT arrays. As a result of strong absorption within solar spectrum and effective suppression of electron-hole pair recombination in CdS/ZnO-TiNT arrays, a significant improvement in solar-to-hydrogen conversion efficiency from 0.39% to 1.30% was obtained.

36 MATERIALS SCIENCE↗

Self-assembled GaN hexagonal micropyramid and microdisk

The self-assembled GaN hexagonal micropyramid and microdisk were grown on LiAlO{sub 2} by plasma-assisted molecular-beam epitaxy. It was found that the (0001) disk was established with the capture of N atoms by most-outside Ga atoms as the (1x1) surface was constructing, while the pyramid was obtained due to the missing of most-outside N atoms. The intensity of cathode luminescence excited from the microdisk was one order of amplitude greater than that from M-plane GaN.

36 MATERIALS SCIENCE↗

Feedback control of plasma electron density and ion energy in an inductively coupled plasma etcher

Here the authors report the development of a fuzzy logic based feedback control of the plasma electron density and ion energy for high density plasma etch process. The plasma electron density was measured using their recently developed transmission line microstrip microwave interferometer mounted on the chamber wall, and the rf voltage was measured by a commercial impedance meter connected to the wafer stage. The actuators were two 13.56 MHz rf power generators which provided the inductively coupled plasma power and bias power, respectively. The control system adopted the fuzzy logic control algorithm to reduce frequent actuator action resulting from measurement noise. The experimental results show that the first wafer effect can be eliminated using closed-loop control for both poly-Si and HfO{sub 2} etching. In particular, for the HfO2 etch, the controlled variables in this work were much more effective than the previous one where ion current was controlled, instead of the electron density. However, the pressure disturbance effect cannot be reduced using plasma electron density feedback.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗