Search NASA⌕ Search

Engineering topics

Hu, Mingyu

Publications and source records attributed to Hu, Mingyu.

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Surface Sn(IV) Hydrolysis Improves Inorganic Sn–Pb Perovskite Solar Cells

Cesium tin-lead (Sn-Pb) perovskites are exceptional for their combined capabilities in unlocking ideal bandgaps for solar cells and mitigating the stability issue faced by their hybrid organic-inorganic counterparts. But the development of high-performance solar cells using these materials is retarded by their inherent high density of detrimental Sn(IV) defects. Herein, we demonstrate a sequential surface treatment method, which entails a Sn(II) halide treatment to displace the buried Sn(IV) ions underneath the film surface, followed by a H 2 O treatment to hydrolyze the displaced Sn(IV) ions. The surface treatment induces chemical and microstructural reconstructions that significantly improve the optoelectronic properties and stability of perovskites. As a result, a power conversion efficiency of 16.79% and a T 90 stability of 958 h are achieved, topping all previously reported performance parameters for inorganic Sn-Pb PSCs. This achievement further shortens the performance gap between all-inorganic and hybrid organic- inorganic Sn-Pb PSCs with sub-1.4 eV bandgaps.

14 SOLAR ENERGY↗
DOE OSTI2022

The mechanical behavior of metal-halide perovskites: Elasticity, plasticity, fracture, and creep

Wide ranging mechanical properties — elasticity, plasticity, fracture, and creep — most relevant to the mechanical reliability of perovskite solar cells (PSCs) are systematically investigated. High quality bulk single-crystals of the commonly studied metal-halide perovskites (MHPs) relevant to PSCs are fabricated and studied: CH 3 NH 3 PbBr 3 (MAPbBr 3 ) and CH 3 NH 3 PbI 3 (MAPbI 3 ). The first direct measurement of MHP Young's modulus (E) using uniaxial compression reveals E <100> of 13.1 ± 1.3 and 10.6 ± 1.0 GPa for MAPbBr 3 and MAPbI 3 , respectively. Further, the Vickers micro-hardness H (100) of MAPbBr 3 and MAPbI 3 is 0.54±0.02 GPa and 0.76±0.05 GPa, respectively. The Vickers micro-indentation fracture toughness K IC of MAPbBr 3 and MAPbI 3 is estimated at 0.20±0.03 MPa∙m 0.5 and 0.18±0.03 MPa∙m 0.5 , respectively. The stress-exponent, n, extracted from nanoindentation creep data is ~8 and ~10 for MAPbBr 3 and MAPbI 3 , respectively. The trends in these properties are discussed. These properties are best estimates and are recommended for use in future mechanical behavior and reliability analyses of MHPs and PSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spin-piston problem for a ferromagnetic thin film: Shock waves and solitons

In this report the unsteady, nonlinear magnetization dynamics induced by spin injection in an easy-plane ferromagnetic channel subject to an external magnetic field are studied analytically. Leveraging a dispersive hydrodynamic description, the Landau-Lifshitz equation is recast in terms of hydrodynamic-like variables for the magnetization's perpendicular component (spin density) and azimuthal phase gradient (fluid velocity). Spin injection acts as a moving piston that generates nonlinear, dynamical spin textures in the ferromagnetic channel with downstream quiescent spin density set by the external field. In contrast to the classical problem of a piston accelerating a compressible gas, here, variable spin injection and field lead to a rich variety of nonlinear wave phenomena from oscillatory spin shocks to solitons and rarefaction (expansion) waves. A full classification of solutions is provided using nonlinear wave modulation theory by identifying two key aspects of the fluid-like dynamics: subsonic/supersonic conditions and convex/nonconvex hydrodynamic flux. Familiar waveforms from the classical piston problem such as rarefaction waves and shocks manifest in their spin-based counterparts as smooth and highly oscillatory transitions, respectively, between two distinct magnetic states. The spin shock is an example of a dispersive shock wave, which arises in many physical systems. New features without a gas dynamics counterpart include composite wave complexes with “contact” spin shocks and rarefactions. Magnetic supersonic conditions lead to two pronounced piston edge behaviors including a stationary soliton and an oscillatory wave train. These coherent wave structures have physical implications for the generation of high frequency spin waves from pulsed injection and persistent, stable stationary and/or propagating solitons in the presence of magnetic damping. The analytical results are favorably compared with numerical simulations.

36 MATERIALS SCIENCE↗