Engineering topics

Hu, Tianhao

Publications and source records attributed to Hu, Tianhao.

5 records

DOE OSTI2026

Cryogenic Reduction of Surface-Bound HKUST-1Crystallites

HKUST-1 is a canonical Cu-based metal-organic framework (MOF) with potential roles in catalysis. A convenient hydroxy double salt templating synthesis was used to produce a thin layer of HKUST-1 crystallites amenable to surface science spec-troscopies under controlled conditions. To study the nature of the Cu sites, N2 and CO2 were adsorbed at cryogenic tempera-tures as passive probe molecules for Cu2+ sites. CO, which is commonly used as a probe molecule of both Cu2+ and Cu1+ sites in porous materials, was found to be a non-innocent probe molecule that reduces the Cu2+ and forms CO2. Isotopically labeled 13CO confirmed the Cu2+ reduction and CO oxidation. The results offer a way to tune Cu oxidation states in HKUST-1, even in the cryogenic temperature regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

The surface chemistry of cuprous oxide

The chemical and electronic properties of copper combined with its large natural abundance lend this material to impact a wide range of technological applications, including heterogeneous catalysis. The reactivity of copper in its Cu 1+ oxidation state makes this specific configuration relevant in various chemical reactions, but the facile redox properties of copper make the isolation of individual states for fundamental studies difficult. Here, in this study, we review three Cu 2 O model systems used to study the interaction of Cu 1+ with small molecules making use of surface science techniques: Cu 2 O/Cu(111), thin polycrystalline Cu 2 O films on Cu foil, and bulk Cu 2 O crystals. Advantages and disadvantages of each system are discussed and exemplified through case studies of chemical adsorption and reactivity studies.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Tracking the dynamics of catalytic Pt/CeO2 active sites during water-gas-shift reaction

Abstract Understanding the atomistic structure of the active site during catalytic reactions is of paramount importance in both fundamental studies and practical applications, but such studies are challenging due to the complexity of heterogeneous systems. Here, we use Pt/CeO 2 as an example to study the dynamic nature of active sites during the water-gas-shift reaction (WGSR) by combining multiple in situ characterization tools. We show that the different concentrations of interfacial Pt δ+ – O – Ce 4+ moieties at Pt/CeO 2 interfaces are responsible for the rank of catalytic performance of Pt/CeO 2 catalysts: Pt/CeO 2 -rod > Pt/CeO 2 -cube > Pt/CeO 2 -oct. For all the catalysts, metallic Pt is formed during the WGSR, leading to the transformation of the active sites to Pt 0 – O v – Ce 3+ and interface reconstruction. These findings shed light on the nature of the active site for the WGSR on Pt/CeO 2 and highlight the importance of combining complementary in situ techniques for establishing structure-performance relationships.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Interaction of Anisole on Alumina-Supported Ni and Mo Oxide Hydrodeoxygenation Catalysts

The conversion of biomass to transportation fuels and value-added chemicals is a promising method to reduce reliance on fossil fuels. Mo-based catalysts have been shown to be highly active in the hydrodeoxygenation of biomass-derived phenolic compounds. The catalyst active phase, surface species, and the effect of adding additional metals is not comprehensively understood. Here we compare the temperature-dependent adsorption behavior of the model compound anisole 2 on an alumina-supported mixed nickel molybdenum oxide catalyst with two reference catalysts of molybdenum oxide and nickel oxide. Raman spectroscopy showed that the catalysts contain significant amounts of molybdates and molybdoaluminates, in addition to NiMoO 4 in the nickel molybdenum catalyst and MoO 3 in the molybdenum-only catalyst. Using transmission infrared spectroscopy under a controlled environment, we find that anisole chemisorbed largely through the oxygen in the methoxy group to form surface-bound phenoxy and methoxy species on all the catalysts. Ambient pressure X-ray photoelectrons spectroscopy measurements of the catalysts in anisole vapor showed reduced Mo atoms are the binding sites. The surface interaction and removal temperature of these species varied with the metal composition. The MoO x component dominated the adsorption behavior in both MoO x and NiMoO x catalysts. The formation of new aromatics, including methylated rings, depended on Ni composition. Upon adding hydrogen to induce the hydrodeoxygenation of anisole, undesirable polynuclear aromatic species were quickly formed on the Mo-based catalysts. In conclusion, these results suggest that the molybdenum oxide controls the adsorption and reactivity of the surface species, with a cooperative effect by Ni.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Active site identification and CO oxidation in UiO-66-XX thin films

Metal-organic frameworks (MOFs) offer an intrinsically porous and chemically tunable platform for gas adsorption, separation, and catalysis. Herein we investigate thin film derivatives of the well-studied Zr–O based MOF powders to understand their adsorption properties and reactivity with their adaption to thin films, involving diverse functionality with the incorporation of different linker groups and the inclusion of embedded metal nanoparticles: UiO-66, UiO-66-NH 2 , and Pt@UiO-66-NH 2 . Using transflectance IR spectroscopy, we determine the active sites in each film upon consideration of the acid-base properties of the adsorption sites and guest species, and perform metal-based catalysis with CO oxidation of a Pt@UiO-66-NH 2 film. Our study shows how surface science characterization techniques can be used to characterize the reactivity and the chemical and electronic structure of MOFs.

36 MATERIALS SCIENCE↗