Search NASA⌕ Search

Engineering topics

Hu, Zhiyu

Publications and source records attributed to Hu, Zhiyu.

Investigation on the electrical transport properties of highly (00l)-textured Sb{sub 2}Te{sub 3} films deposited by molecular beam epitaxy

Highly (00l)-textured antimony telluride films were fabricated using molecular beam epitaxy (MBE) on Si (111) substrate at 280 °C. X-ray diffraction analysis implying the samples have good crystalline quality, simultaneously, the grain sizes coarsening with increasing thickness. The results of Hall coefficient measurement demonstrated that the carrier concentration and mobility are strongly affected by grain boundaries and microcrystalline internal defects. It was found that the grain boundaries play a primary factor influencing the carrier concentration in thinner film. At room temperature, the results in a maximum mobility value of 305 cm{sup 2}/Vs for 121-nm-thick film, and the electrical conductivity increased from 425.7 S/cm to 1036 S/cm as the thickness varied from 28 nm to 121 nm. In the range of room temperature to 150 °C, the resistivity almost linearly increased with increasing temperature. This may be explained by low concentration of impurities or defects and shallow impurity band. For difference thickness films, temperature coefficients of resistivity are substantially equal, and the values are about 3 ∼ 4 μΩ⋅cm/K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solid state transport-based thermoelectric converter

A solid state thermoelectric converter includes a thermally insulating separator layer, a semiconducting collector and an electron emitter. The electron emitter comprises a metal nanoparticle layer or plurality of metal nanocatalyst particles disposed on one side of said separator layer. A first electrically conductive lead is electrically coupled to the electron emitter. The collector layer is disposed on the other side of the separator layer, wherein the thickness of the separator layer is less than 1 .mu.m. A second conductive lead is electrically coupled to the collector layer.

36 MATERIALS SCIENCE↗