Search NASA⌕ Search

Engineering topics

Huang, Chen

Publications and source records attributed to Huang, Chen.

At least 19 records

Direct measurement of fluorocarbon radicals in the thermal destruction of perfluorohexanoic acid using photoionization mass spectrometry

Thermal destruction is a critical cornerstone of addressing the rampant contamination of natural resources with per- and polyfluoroalkyl substances (PFAS). However, grave concerns associated with stack emissions from incineration exist because mechanistic studies have thus far relied on ex situ analyses of end products and theoretical calculations. Here, we used synchrotron-based vacuum ultraviolet photoionization mass spectrometry to study the pyrolysis of a representative PFAS-perfluorohexanoic acid-and provide direct evidence of fluorocarbon radicals and intermediates. A key reaction pathway from perfluorocarboxylic acids to ketenes via acyl fluorides is proposed. We furthermore propose CF2/CF3 radical-centered pyrolysis mechanisms and explain their roles in the formation of other products that may form in full-scale incinerators. These results have not only unveiled the role of radicals and intermediates in thermal PFAS decomposition and recombination mechanisms but also provide unique insight into improving the safety and viability of industrial PFAS incineration.

Xu, Ming-Gao↗

A free association semantic task for fNIRS-based perinatal depression assessment

Perinatal depression (PD) is a highly prevalent psychological disorder that has a detrimental effect on infant and maternal physical and mental health, but effective and objective assessment of PD is still insufficient. In recent years, the functional near-infrared spectroscopy (fNIRS) has been acknowledged as an effective non-invasive tool for clinical assessment of depression. This study proposed a free association semantic task (FAST) paradigm for fNIRS-based assessment of PD. To better address the emotion characteristics of PD, the participants are required to generate a dynamic concept chain based on positive, negative or neutral seed words, while 48-channel fNIRS recordings over frontal and bilateral temporal regions. Results from twenty-two late-pregnant women revealed that, the oxyhemoglobin (oxy-Hb) changes during the FAST with the positive and negative seed words over the frontal region were correlated with PD severity, which was different from the correlation patterns in the FAST with neutral seed word and the classical verbal fluency test (VFT). Furthermore, distinct correlation patterns were also observed in the FAST with the positive and negative seed words, manifested in fNIRS channels corresponding to the right dorsolateral prefrontal cortex (DLPFC) and right inferior frontal gyrus (IFG), respectively. Moreover, regression analyses showed that the FAST with positive and negative seed words can well explain the severity of PD. Our findings suggest the proposed FAST paradigm as a promising approach for PD assessment.

Chen, Danni↗

Tailoring Ion Transport in Li 3‐3y Ho 1+y Cl 6‐x Br x via Transition‐Metal Free Structural Planes and Charge Carrier Distribution

Abstract Localized atomistic disorder in halide‐based solid electrolytes (SEs) can be leveraged to boost Li + mobility. In this study, Li + transport in structurally modified Li 3 HoCl 6 , via Br − introduction and Li + deficiency, is explored. The optimized Li 3‐3 y Ho 1+ y Cl 6‐ x Br x achieves an ionic conductivity of 3.8 mS cm −1 at 25 °C, the highest reported for holmium halide materials. 6,7 Li nuclear magnetic resonance and relaxometry investigations unveil enhanced ion dynamics with bromination, attaining a Li + motional rate neighboring 116 MHz. X‐ray diffraction analyses reveal mixed‐anion‐induced phase transitions with disproportionate octahedral expansions and distortions, creating Ho‐free planes with favorable energetics for Li + migration. Bond valence site energy analysis highlights preferred Li + transport pathways, particularly in structural planes devoid of Ho 3+ blocking effects. Molecular dynamics simulations corroborate enhanced Li + diffusion with Br − introduction into Li 3 HoCl 6 . Li‐Ho electrostatic repulsions in the (001) plane presumably drive Li + diffusion into the Ho‐free (002) layer, enabling rapid intraplanar Li + motion and exchange between the 2d and 4h sites. Li 3‐3 y Ho 1+ y Cl 6‐ x Br x also demonstrates good battery cycling stability. These findings offer valuable insights into the intricate correlations between structure and ion transport and will help guide the design of high‐performance fast ion conductors for all‐solid‐state batteries.

Chemistry↗

Cellulose nanofibrils-based packaging films synergistically reinforced by lignin and tea polyphenols for strawberry preservation

Developing biomass-based food packaging materials could alleviate resource scarcity and environmental pollution. Here, this study successfully fabricated cellulose nanofibrils-based packaging films synergistically reinforced by lignin and tea polyphenols for fruit preservation. Thanks to the abundant carboxyl and hydroxyl groups in modified lignin and tea polyphenol, the composite film delivered the highest tensile strength and Young’s modulus of 230.7 MPa and 11.9 GPa, respectively. The water vapor permeability (WVP) and oxygen permeability (OP) of composite film were as low as 2.53 × 10 –11 gm –1 s –1 Pa –1 and 1.69 × 10 –16 cm m –2 s–1 Pa –1 , respectively, demonstrating excellent barrier performance. Furthermore, the composite film possessed remarkable antibacterial (100 % antibacterial activity against two types of bacteria), antioxidant (DPPH free radical scavenging activity of 90 %), and UV shielding properties (impressive UV shielding rate of 99.0 %). Strawberry preservation experiments showed that these composite films could significantly extend shelf life, owing to the excellent barrier and antimicrobial properties. Our research indicated that these composite films could be promising food packaging material compared with traditional plastic and showed great application potential in fruit preservation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-chromophore lignin isolation from natural biomass with polyol-based deep eutectic solvents

When attempting to obtain light-color lignin from lignocellulosic biomass or industrial lignin, the available options based on chemical or morphological modification suffer from low yield, high cost, and lack of availability at the required scales. In this study, we adopted a polyhydric-alcohol-based deep eutectic solvent (PA-DES) to directly extract light-color lignin from natural biomass, which is even whiter than native cellulolytic enzyme lignin (CEL). The isolated lignin possessed a high recovery yield (97.36%), regular micro-spherical morphology, enriched β-ether linkage of 58/100Ar, low phenolic hydroxyl content of 1.25 mmol g -1 , minimal carbonyl content of 0.70 mmol g -1 , and less condensed structures, thus yielding a lower content of chromophores. Further, this lignin showed excellent sunscreen effects, which could enhance the SPF of a commercial sunscreen from 15 to 40 with only 5 wt% addition. This study can provide essential guidance for the scale-up production of light-color lignin and obtaining near-complete digestible cellulose for further saccharification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the alkaline hydrogen peroxide pretreatment: From cellulose saccharification to lignin isolation

Alkaline hydrogen peroxide (AHP) pretreatment, a green and effective technology for biomass fractionation, was studied to overcome the recalcitrance of bamboo for lignin isolation and facilitating enzymatic saccharification. In order to explore the impact of AHP pretreatment on the cellulose saccharification of bamboo, the glucan/xylan recovery, lignin removal, and structural properties of solid substrate were investigated in this research. AHP pretreatment at 90 °C for 60 min with 3.0 % H 2 O 2 resulted in the maximum glucan/xylan hydrolysis yield reaching 90.62 % and 88.30 %, respectively. Specially, for the first time, the recovered lignin from the AHP liquid possesses up to 59.84/100Ar of β-O-4 linkages, abundant ferulic acid (FA), and p-coumarate (pCE) structures, as well as a homogeneous molecular structure with high purity (84.04%-96.20%) and preferable antioxidant activities (IC50: 0.015–0.018 mg/mL). Finally, these results provided theoretical support for the comprehensive valorization of lignocellulose, which is favorable for achieving viable biorefineries.

09 BIOMASS FUELS↗

A tailored deep eutectic solvent for high-yield conversion of poplar residues to bio-based building blocks at mild conditions

The generation of condensed compounds in a deep eutectic solvent (DES) pretreatment has become a paramount factor that inhibits the further conversion of pretreated cellulose-rich substrate. Here, this study proposed a novel three-constituent DES system for the value-added utilization of poplar residues by efficiently suppressing hemicellulose derived condensation reactions. The results showed that adding ethanol into the DES system could effectively deconstruct the recalcitrant structure of poplar residues, simultaneously hindering the condensed composition formation. Under optimum ethanol addition (30%), the maximum xylan and lignin removal of 87.94% and 90.99% could be achieved, with more than 90.47% of glucan being preserved. With this, the glucan enzymatic hydrolysis efficiency was remarkably improved to 100% under the pretreatment conditions of 100 °C for 60 min, which was 84.69 times higher than the regular DES-pretreated poplar residues (1.17%). The working mechanism of relieving condensation reactions was characterized by Py-GC–MS, NMR, SEM, FTIR, and others. The results demonstrated that the addition of ethanol could regulate the degradation/conversion pathway of hemicellulose and lignin precipitation, thus inhibit the formation of condensed compounds during the pretreatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cellulose regulated lignin/cellulose-based carbon materials with hierarchical porous structure for energy storage

Lignin has gained extensive attention as an ideal carbon precursor due to its abundance and high carbon content. However, the agglomeration of lignin and additional corrosive and unrecyclable reagents in direct pyrolysis still limit the development of lignin-based porous carbons. Herein, a facile and eco-friendly strategy was proposed to fabricate hierarchical porous lignin/cellulose-based carbon materials (LCs). In the process, cellulose nanofibrils acted as the skeleton of the bio-aerogels, which supported lignin and benefit the preparation of the LCs. Moreover, the specific surface area and the graphitization degree of LCs can be regulated by varying the cellulose content. Without activation, the bio-based carbon material (LC30) had a high specific surface area of 1770 m 2 g –1 , which displayed high specific capacitance of 216.2 F g –1 at the current density of 0.5 A g –1 . The supercapacitor based on LC30 also showed outstanding energy density of 12.3 Wh kg –1 at the power density of 50 W kg –1 . The sustainable raw material, simple and harmless preparation process, and remarkable electrochemical performance enable LC30, a promising supercapacitor electrode for energy storage.

25 ENERGY STORAGE↗

Pan-cancer proteogenomics characterization of tumor immunity

Despite the successes of immunotherapy in cancer treatment over recent decades, less than <10%–20% cancer cases have demonstrated durable responses from immune checkpoint blockade. To enhance the efficacy of immunotherapies, combination therapies suppressing multiple immune evasion mechanisms are increasingly contemplated. To better understand immune cell surveillance and diverse immune evasion responses in tumor tissues, we comprehensively characterized the immune landscape of more than 1,000 tumors across ten different cancers using CPTAC pan-cancer proteogenomic data. We identified seven distinct immune subtypes based on integrative learning of cell type compositions and pathway activities. We then thoroughly categorized unique genomic, epigenetic, transcriptomic, and proteomic changes associated with each subtype. Further leveraging the deep phosphoproteomic data, we studied kinase activities in different immune subtypes, which revealed potential subtype-specific therapeutic targets. Insights from this work will facilitate the development of future immunotherapy strategies and enhance precision targeting with existing agents.

60 APPLIED LIFE SCIENCES↗

Efficient Fast Fractionation of Biomass Using a Diol-Based Deep Eutectic Solvent for Facilitating Enzymatic Hydrolysis and Obtaining High-Quality Lignin

Current DES pretreatment is often performed under relatively severe conditions with high temperature, long time, and high DES usage. This work studied a short-time diol DES (deep eutectic solvent) pretreatment under mild conditions to fractionate the bamboo, facilitate enzymatic hydrolysis, and obtain high-quality lignin. At an optimized condition of 130 °C for only 10 min, lignin and xylan removal reached 61.34% and 84.15 %, with residual glucan showing a ~90% enzymatic hydrolysis yield. Equally important, the dissolved lignin could be readily recovered with 97.51% yield, exhibiting 96.65 % β-O-4 preservation. The fractionation and lignin protection mechanisms were unveiled by XRD, FTIR, cellulose-DP, 2D HSQC NMR, 31 P NMR and GPC analysis. Finally, this study highlighted that short-time fractionation of bamboo can be achieved by a diol-based DES which is an ideal strategy to upgrade the lignocellulose biomass for high enzymatic hydrolysis yields and high-quality lignin stream.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deep learning integrates histopathology and proteogenomics at a pan-cancer level

We introduce a pioneering approach that integrates pathology imaging with transcriptomics and proteomics to identify predictive histology features associated with critical clinical outcomes in cancer. We utilize 2,755 H&E-stained histopathological slides from 657 patients across 6 cancer types from CPTAC. Our models effectively recapitulate distinctions readily made by human pathologists: tumor vs. normal (AUROC = 0.995) and tissue-of-origin (AUROC = 0.979). We further investigate predictive power on tasks not normally performed from H&E alone, including TP53 prediction and pathologic stage. Importantly, we describe predictive morphologies not previously utilized in a clinical setting. The incorporation of transcriptomics and proteomics identifies pathway-level signatures and cellular processes driving predictive histology features. Model generalizability and interpretability is confirmed using TCGA. We propose a classification system for these tasks, and suggest potential clinical applications for this integrated human and machine learning approach. A publicly available web-based platform implements these models.

60 APPLIED LIFE SCIENCES↗

A novel mineral-acid free biphasic deep eutectic solvent/γ-valerolactone system for furfural production and boosting the enzymatic hydrolysis of lignocellulosic biomass

The failure of hemicellulose valorization in a deep eutectic solvent (DES) pretreatment has become a bottleneck that challenges its further development. Here, to address this issue, this study developed a DES/GVL (γ-valerolactone) biphasic system for effective hemicellulose-furfural conversion, enhanced cellulose saccharification and lignin isolation. The results indicated that the biphasic system could significantly improve the lignin removal (as high as 89.1%), 86.0% higher than the monophasic DES, accompanied by ~100% hemicellulose degradation. Notably, the GVL in the biphasic solvent restricted the condensation of hemicellulose degradation products, which as a result generated large amount of furfural in the pretreatment liquid with a yield of 68.6%. With the removal of hemicellulose and lignin, cellulose enzymatic hydrolysis yield was boosted and reached near 100%. This study highlighted that the novel DES/GVL is capable of fractionating the biomass and benefiting their individual utilization, which could provide a new biorefinery configuration for a DES pretreatment.

09 BIOMASS FUELS↗

Direct Extraction of Uniform Lignin Microspheres from Bamboo Using a Polyol-Based Deep Eutectic Solvent

Conventional preparation of lignin micro-/nano-particles (LMNPs) often needs multiple steps accompanied by high cost, low efficiency, and low yield. Herein, this study established a polyhydric alcohol-based deep eutectic solvent (PA-DES) fractionation for direct LMNP assembly from raw lignocellulose. The results indicated that lignin was significantly extracted by 41.55–70.33% depending on the PA-DES varieties. With lignin removal, the substrate showed high glucan enzymatic saccharification from 70.44 to 100%. Specially, over 90% lignin could be recovered in each PA-DES, and the obtained LMNPs showed quite uniform spherical morphology with a tunable size of 550–3254 nm and narrow polydispersity index (PDI) of 0.295–0.398. The proposed DES showed a near theoretical recovery yield, which still featured excellent fractionation performance even after three cycles of reuse. In conclusion, the findings highlight the simultaneous utilization of cellulose and lignin in a one-pot biomass fractionation under mild conditions with sugars and LMNPs as the coproducts.

36 MATERIALS SCIENCE↗

One-pot generation of lignin microspheres and digestible substrate with a polyol-DES pretreatment in high solid loading

Previous lignin microspheres (LMS) preparation needs multiple steps with very low yield and high cost. Herein, we developed a high-solid deep eutectic solvent (DES) pretreatment for an effective lignin fractionation and enzymatic saccharification of moso bamboo under mild temperature (110 °C) with high-solid loading. Lignin was significantly removed from the plant cell wall, and cellulose properties (e.g., crystallinity and degree of polymerization) were also altered during the pretreatment. As a result, the enzymatic digestibility of the pretreated bamboo was dramatically increased. Uniform micro-spherical lignin was directly produced from the pretreatment system, and its particle size could be regulated by controlling the solid loadings and pretreatment temperatures. The lignin microspheres formation mechanism was investigated by analyzing the lignin's size distribution, molecular weight distribution, chemical structure, and hydrophobicity. The DES showed excellent recyclability, and the recycled DES could still remove 42.78% lignin even after 7th circulation associated with 100% glucan saccharification. Further, the mass balance based on 1000 g biomass showed that 196.28 g LMS was directly recovered, which exhibited a high RhB adsorption. Besides, 404.91 g glucose and 36.67 g xylose were obtained after the enzymatic saccharification process. Specifically, GAPI analysis exhibited a near total green and yellow portions of the pictogram, indicating our DES process was green enough to make this biorefinery sustainable. Overall, the proposed DES generated synergistic productions of digestible solid and LMS which could contribute to establish a green and sustainable biorefinery sequence with diverse outputs in one pot.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A high-solid DES pretreatment using never-dried biomass as the starting material: towards high-quality lignin fractionation

This study investigated a high-solid diol deep eutectic solvent (DES) pretreatment using a wet substrate as the starting material. This pretreatment led to a remarkable glucan saccharification of 94.8% with efficient lignin and xylan removal (as high as 63.1% and 73.0%, respectively). Here the chemical structures of the substrates were analyzed comprehensively to reveal the impact of the pretreatment. In addition, over 90% of the removed lignin was recovered from the pretreated liquid, which exhibited a well-preserved β-O-4 structure (46–56/100Ar). The protection mechanism of our DES was investigated by 2D HSQC NMR, GPC, and 31 P NMR analysis. This study emphasized that diol-based DES pretreatment of undried lignocellulosic biomass at a high-solid loading can significantly utilize both carbohydrates and lignin fractions with high saccharification yields and high-quality lignin as a co-product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alkali-facilitated deep eutectic solvent for effective bamboo saccharification

In this report, a Na 2 S promoted deep eutectic solvent (DES) was established to reduce the natural recalcitrance of moso bamboo (MB) and improve the subsequent enzymatic saccharification. It was found that the addition of Na 2 S (Choline chloride/Ethylene glycol/Na 2 S) dramatically promoted the deconstructions of lignin with highest removal of 74.67 %, but at the same time preserved glucan and hemicellulose to the maximum extent. With the fractionation, the enzymatic saccharification yield of pretreated MB can reach 100 % under the pretreatment condition of 140 °C, and lignin could be readily recovered with a high yield of 81.47 %. The proposed DES is superior to normal alkaline DES in terms of the higher lignin removal and recovery yield, carbohydrate preservation and enzymatic digestibility, which indicated Na 2 S as a novel and powerful reinforcer enhancing the DES fractionation efficiency.

09 BIOMASS FUELS↗

Utilization of guaiacol-based deep eutectic solvent for achieving a sustainable biorefinery

This study proposed a renewable deep eutectic solvent (DES) pretreatment using lignin-derived guaiacol as the hydrogen bond donor. The DES showed excellent biomass fractionation efficiency after the incorporation of trace AlCl 3 as the reinforcer, which removed 79.1 % lignin while preserving more than 90 % glucan. The pretreated bamboo exhibited 96.2 % glucan enzymatic hydrolysis yield at only 110 °C. The physicochemical properties of the pretreated solids were comprehensively investigated to explain how the DES fractionation overcame the biomass recalcitrance. The regenerated lignin from the DES pretreatment was also analyzed, which revealed that lignin β-O-4 bond was significantly cleaved. In conclusion, this guaiacol-based DES could greatly contribute to establish a closed-loop biorefinery sequence with high lignin fractionation efficiency and great solvent recyclability.

09 BIOMASS FUELS↗

Editorial: Lignocellulose valorization: Fractionation, conversion and applications

Lignocellulosic biomass is the most abundant form of renewable feedstock on the Earth. Chemicals, energies, and materials derived from lignocellulosic biomass are renewable and sustainable, and have the potential to replace fossil feedstocks. Biorefinery, a process to fractionate lignocellulose into the three major components, is considered the most pivotal step for bioenergy, biomaterials and biochemicals. However, due to the complex hierarchy and chemical structures, only limited lignocellulose is valorized into value-added products, and most of them are burnt or just discarded. Therefore, there is a need to investigate the heterogeneous structure of lignocellulose, improve its efficient fractionation into cellulose, hemicelluloses and lignin, and develop the technology that can convert the lignocellulose into high-value chemical products and high-performance functional materials in a sustainable and promising configuration. In short, the ultimate goal of biomass utilization is that the production of biofuels and biomaterials in industrial applications must be cost-, and performance-competitive with petroleum-derived equivalents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗