Search NASA⌕ Search

Engineering topics

Huang, He

Publications and source records attributed to Huang, He.

At least 19 records

Practically Accessible All-Solid-State Batteries Enabled by Organosulfide Cathodes and Sulfide Electrolytes

The combination of organic electrode materials and sulfide electrolytes is expected to enable the development of all-solid-state organic batteries featuring high energy density and long-term sustainability. In this work, thiuram hexasulfide is reported as a low-cost and high-capacity organic cathode for solid-state batteries based on sulfide electrolytes, delivering a capacity of ~600 mAh g -1 and retaining 80.8 % capacity after 500 cycles. An electrochemically reversible change of the cathode interface was revealed upon cycling. Full cell displays an oscillating stress change up to 0.6 MPa during cycling, predominated by the anode side. The energy density is 1140 Wh kg -1 at the material level and 376 Wh kg -1 at the electrode level, which are among the best-reported organic cathodes to date. A high areal capacity of 10.4 mAh cm -2 is reached with a high mass loading cathode. A dry-film approach is further explored to manufacture sheet-type cells. Free-standing electrolyte film is merely ~48 μm thick and demonstrates an ultralow areal resistance of 3.9 Ω cm 2 , significantly boosts the cell-level energy density and reduces the cell internal resistance.

25 ENERGY STORAGE↗

Polyimide as a durable cathode for all-solid-state Li(Na)–organic batteries with boosted cell-level energy density

The integration of organic electrode materials (OEMs) with solid-state electrolytes (SSEs) is expected to build an all-solid-state battery (ASSB) with long-term sustainability, high safety, and high energy density. Despite this great promise, the cell-level energy density is still far from practically applicable, which stems from the ultrathick SSE layer and thin cathode layer used in a pellet-type ASSB design. Here, a cost-effective polyimide (PI) material was first exploited as an organic cathode for sulfide-based ASSBs. A capacity of ~190 mAh g -1 was delivered with almost no capacity decay over 300 cycles. Moreover, for the first time, a dry-film approach was introduced to manufacture a sheet-type Li–organic ASSB with an ultrathin SSE layer and a high-areal-loading PI cathode. Notably, PI is a perfect candidate for dry-film technology due to its high thermal stability and extraordinary chemical inertness toward sulfide SSEs. Remarkably, the free-standing SSE membrane was merely 46 μm thick, and an ultralow areal resistance of 3.3 Ω cm 2 was achieved, more than tenfold lower than that of reported SSE pellets. One order of magnitude boost in the cell-level energy density was achieved. This work presents a significant leap in transferring organic ASSB technology from laboratory research to factory manufacturing.

25 ENERGY STORAGE↗

A high-performance organic cathode customized for sulfide-based all-solid-state batteries

All-solid-state batteries (ASSBs) have become increasingly attractive recently due to their better safety and prospective long-term stability compared with conventional liquid batteries. However, obtaining a sustainable cathode candidate to match the solid electrolyte with regards to operating potential, chemical compatibility, and mechanical property is still an open challenge. In this work, the chemical incompatibility of quinone-based active materials and sulfide-based electrolyte were unveiled for the first time through a heteroconjugate addition reaction mechanism. To develop a quinone cathode customized for sulfide-based ASSBs, poly-(anthraquinonyl sulfide)-graphene (PAQS-G) nanocomposite was reported. The stable polymer framework of PAQS can protect the quinone redox center by preventing nucleophilic attack from sulfide-based solid electrolytes. The graphene additives can ameliorate redox kinetics and improve active material utilization. The PAQS-G cathode exhibited a specific capacity of ~178 mAh g -1 and a high material utilization of ~79%. Excellent cycling stability was achieved with 94 % capacity after 200 cycles in lithium batteries and 95.5 % capacity after 300 cycles in sodium batteries at 0.1C rate, respectively. A promising potential for energy storage applications was demonstrated.

25 ENERGY STORAGE↗

Effect of the chlorine substitution position of the end-group on intermolecular interactions and photovoltaic performance of small molecule acceptors

The structure–property relationships of small molecular acceptors (SMAs) are a key issue in the molecular design of new-generation acceptor materials for further improving the device efficiencies of polymer solar cells (PSCs). Herein, three couples of SMA isomers were synthesized, based on three central fused ring units and two 1,1-dicyanomethylene-3-indanone (IC) isomer electron-withdrawing terminal units with chlorine substitutions in different positions of its benzene ring: Cl-1 with chlorine on the same side as a C=O group of IC and Cl-2 with chlorine on the same side as the CN groups of IC. Through systematical investigation, we found that the chlorine substitution position of the terminal groups has a regular and significant influence on the molecular packing and photovoltaic performance of the SMAs. The molecular packing behavior of the SMAs is closely related to and determined by the configuration of their terminal groups, no matter which central fused ring of the SMAs is used. In particular, the Cl-1-based SMAs possess a stronger crystallinity with long range ordering packing in their molecular plane direction, while the more abundant and stereoscopic π–π intermolecular interaction in the Cl-2-based SMAs promotes the molecules to form three-dimensional charge transporting channels and leads to their red-shifted absorption and higher electron mobilities. Therefore, the Cl-2-based PSCs exhibit a higher power conversion efficiency (PCE) compared to that of the Cl-1-based devices, and the best PCE of a Cl-2 SMA-based PSC reached 16.42%. These results highlight the importance of the investigation of intermolecular interactions, packing and the arrangement of the SMAs in the solid-state, which may provide direct insights for exploring the relationship between the molecular structure and property of the photovoltaic materials. Moreover, we envision that if fragments such as end groups or side chains with more diverse molecular interactions are added into the design and the subsequent synthesis of the SMAs, this may be beneficial to promoting molecular π–π accumulation and further improving the molecular order, forming suitable molecular packing and morphology in the resulting blend films, and finally affecting the efficiency of the PSCs.

14 SOLAR ENERGY↗

A redox-active organic cation for safer metallic lithium-based batteries

Safety concerns have severely impeded the practical application of high-energy-density lithium-based batteries. Dendrite growth and overcharging can lead to particularly catastrophic thermal failure. Here we report an organic cation, trisaminocyclopropenium (TAC), as a bi-functional electrolyte additive to suppress dendrite growth and offer reversible overcharge protection for metallic lithium-based batteries. During the Li plating process, TAC cations with aliphatic chains can form a positively charged electrostatic shield around Li protrusions, repelling the approaching Li + and thereby attaining a more uniform plating. A two times longer cycle life of 300 h at 1 mA cm -2 is achieved in a Li|Li symmetric cell in comparison with the control. During the overcharging process, the redox-active TAC can repeatedly shuttle between two electrodes, maintaining the cell voltage within a safe value. A solid protection of 117 cycles (~1640 h) at 0.2 C with a 100% overcharge is achieved in a LiFePO 4 /Li 4 Ti 5 O 12 cell. This study sheds fresh light on the ability of organic cations to build safer batteries.

25 ENERGY STORAGE↗

A redox-active organic cation for safer high energy density Li-ion batteries

Ni-rich layered cathode materials are at the forefront to be deployed in high energy density Li-ion batteries for the automotive market. However, the intrinsic poor structural and interfacial stability during overcharging could trigger violent thermal failure, which severely limits their wide application. To protect the Ni-rich cathode from overcharging, we firstly report a redox-active cation, thioether-substituted diaminocyclopropenium, as an electrolyte additive to limit the cell voltage within the safe value during overcharging. The organic cation demonstrates a record-breaking electrochemical reversibility at ~4.55 V versus Li + /Li and solubility (0.5 M) in carbonate-based electrolyte. The protection capability of the additive was explored in two cell chemistries: a LiNi 0.8 Co 0.15 Al 0.05 O 2 /graphite cell and a LiNi 0.8 Co 0.15 Al 0.05 O 2 /silicon–graphene cell with areal capacities of ~2.2 mA h cm -2 and ~3 mA h cm -2 , respectively. With 0.2 M addition, the LiNi 0.8 Co 0.15 Al 0.05 O 2 /graphite cell survived 54 cycles at 0.2C with 100% overcharge. Moreover, the cell can carry an utmost 4.4 mA cm -2 (2C) with 100% overcharge and a maximum capacity of 7540% SOC at 0.2C.

25 ENERGY STORAGE↗

ff19SB: Amino-acid specific protein backbone parameters trained against quantum mechanics energy surfaces in solution

Molecular dynamics (MD) simulations have become increasingly popular in studying the motions and functions of biomolecules. The accuracy of the simulation, however, is highly determined by the molecular mechanics (MM) force field (FF), a set of functions with adjustable parameters to compute the potential energies from atomic positions. However, the overall quality of the FF, such as our previously published ff99SB and ff14SB, can be limited by assumptions that were made years ago. In the updated model presented here (ff19SB), we have significantly improved the backbone profiles for all 20 amino acids. We fit coupled Φ/ψ parameters using 2D Φ/ψ conformational scans for multiple amino acids, using as reference data the entire 2D quantum mechanics (QM) energy surface. We address the polarization inconsistency during dihedral parameter fitting by using both QM and MM in solution. Finally, we examine possible dependency of the backbone fitting on side chain rotamer. To extensively validate ff19SB parameters, we have performed a total of ~5 milliseconds MD simulations in explicit solvent. Here, our results show that after amino-acid specific training against QM data with solvent polarization, ff19SB not only reproduces the differences in amino acid specific Protein Data Bank (PDB) Ramachandran maps better, but also shows significantly improved capability to differentiate amino acid dependent properties such as helical propensities. We also conclude that an inherent underestimation of helicity is present in ff14SB, which is (inexactly) compensated by an increase in helical content driven by the TIP3P bias toward overly compact structures. In summary, ff19SB, when combined with a more accurate water model such as OPC, should have better predictive power for modeling sequence-specific behavior, protein mutations, and also rational protein design.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Short‐Axis Alkoxy Substituents on Molecular Self‐Assembly and Photovoltaic Performance of Indacenodithiophene‐Based Acceptors

Abstract The effects of central alkoxy side chain length of a series of narrow bandgap small molecule acceptors (SMAs) on their physicochemical properties and on the photovoltaic performance of the SMA‐based polymer solar cells (PSCs) are systematically investigated. It is found that the ordered aggregation of these SMAs in films is enhanced gradually with the increase of alkoxy chain length. The single‐crystal structures of these SMAs further reveal that small changes in the side chain length can have a dramatic impact on molecular self‐assembly. The short‐circuit current density and power conversion efficiency values of the corresponding PSCs increase with the increase of the side chain length of the SMAs. The π–π coherence length of the SMAs in the active layers is increased with the increase of the side chain length, which could be the reason for the increase of the J sc in the PSCs. The results indicate that small changes in side chain length can have a dramatic impact on the molecular self‐assembly, morphology, and photovoltaic performance of the PSCs. The structure–performance relationship established in this study can provide important instructions for the side chain engineering and for the design of efficient SMAs materials.

Li, Xiaojun↗

Slow expansion in the scalar-tensor theory of gravity

In this paper, we analyze the slow expansion scenario in the scalar-tensor theory of gravity. After considering the slow expansion solution H≃0, we discuss the slow expansion in the scalar-tensor theory by terms of the nearly scale-invariant primordial power spectrum and find that the primordial power spectrum can be determined by the coupling function f(φ). After the slow expansion phase ends, general relativity can be recovered under certain conditions, and then the universe evolves in accordance with the standard cosmology. In the scalar-tensor theory, the slow expansion scenario provides a possible way to avoid the big bang singularity.

79 ASTRONOMY AND ASTROPHYSICS↗

Electrophotocatalysis with a Trisaminocyclopropenium Radical Dication

Abstract Visible‐light photocatalysis and electrocatalysis are two powerful strategies for the promotion of chemical reactions. Here, these two modalities are combined in an electrophotocatalytic oxidation platform. This chemistry employs a trisaminocyclopropenium (TAC) ion catalyst, which is electrochemically oxidized to form a cyclopropenium radical dication intermediate. The radical dication undergoes photoexcitation with visible light to produce an excited‐state species with oxidizing power (3.33 V vs. SCE) sufficient to oxidize benzene and halogenated benzenes via single‐electron transfer (SET), resulting in C−H/N−H coupling with azoles. A rationale for the strongly oxidizing behavior of the photoexcited species is provided, while the stability of the catalyst is rationalized by a particular conformation of the cis ‐2,6‐dimethylpiperidine moieties.

Huang, He↗

Electrophotocatalysis with a Trisaminocyclopropenium Radical Dication

Visible-light photocatalysis and electrocatalysis are two powerful strategies for the promotion of chemical reactions. Here, these two modalities are combined in an electrophotocatalytic oxidation platform. This chemistry employs a trisaminocyclopropenium (TAC) ion catalyst, which is electrochemically oxidized to form a cyclopropenium radical dication intermediate. The radical dication undergoes photoexcitation with visible light to produce an excited-state species with oxidizing power (3.33V vs. SCE) sufficient to oxidize benzene and halogenated benzenes via single-electron transfer (SET), resulting in C-H/N-H coupling with azoles. Additionally, a rationale for the strongly oxidizing behavior of the photoexcited species is provided, while the stability of the catalyst is rationalized by a particular conformation of the cis-2,6-dimethylpiperidine moieties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of Chimney Technique and Single-Branched Stent Graft for Treating Patients with Type B Aortic Dissections that Involved the Left Subclavian Artery

Objective: To compare the short-term efficiency of two different endovascular repairs for type B aortic dissection involving the left subclavian artery. Methods: From February 2013 to March 2016, a cohort of 43 patients with TBADs involving the LSA underwent thoracic endovascular aortic repair (TEVAR) in two departments, consisting of 22 (Group A) with chimney grafts (CGs) and 21 (Group B) with single-branched stent graft (SBSG). Results of the two groups in perioperative and follow-up period (≥ 3 months) were comparatively analyzed, especially on aortic remodeling. Results: Endoluminal repair of the two groups was successfully carried out. The median follow-up period was 19 months (range, 3–43 months) in Group A and 12 months in Group B (range, 6–32 months). During the TEVAR, one CG compression occurred in Group A and one type I endoleak in Group B. During follow-up, four complications occurred in Group A (two CGs occlusion, one type I endoleak and one death from dissecting aneurysm rupture), compared with two occurred in Group B (one sidearm graft twist and one death from myocardial infarction). Complete thrombosis of the false lumen (FL) in thoracic aorta was revealed in 83.3% (15/18) cases in Group A and 89.5% (17/19) in Group B. Partial thrombosis of the FL was revealed in 16.7% (3/18) cases in Group A and 10.5% (2/19) in Group B. In the abdominal aorta, complete thrombosis of the FL was noted in 23.1% (3/13) cases in Group A and 36.4% (4/11) in Group B. Partial thrombosis of the FL was revealed in 76.9% (10/13) cases in Group A and 63.6% (7/11) in Group B. Significant true lumen re-expansion and false lumen regression were observed in different levels of the descending aorta by computed tomography angiography (CTA) in both Groups A and B (P < 0.05). No significant diametric changes of abdominal aorta were found during follow-up in both groups. Conclusions: For patients with TBADs involving the LSA, the chimney technique and the SBSG revealed comparable results. Further evaluation of more patients with longer follow-up is needed to substantiate these results.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Historical Pollution and Source Contributions of PAHs in Sediment Cores from the Middle Reach of Huai River, China

To investigate the spatial and historical distributions, and source contributions of polycyclic aromatic hydrocarbon (PAHs) from the middle reach of Huai River, 15 surface sediments and two sediment cores were analyzed. The Σ{sub 16} PAHs levels in surface sediments varied from 533.15 to 1422.83 ng/g dw, and from 413.27 to 43951.56 ng/g dw in individual sediment layer of sediment cores. The temporal trends of PAHs in sediment cores are the good indicators of the anthropogenic emissions over the last 60 years. The stable carbon isotope ratios of PAHs indicate the primary PAHs sources were the combustion of wood and coal during 1950s–1970s, and automobile exhausts and the coal combustion emissions in recent decades.

54 ENVIRONMENTAL SCIENCES↗

On the stability of Einstein static universe in general scalar–tensor theory with non-minimal derivative coupling

The emergent scenario claims that our universe stems from an Einstein static universe, and provides a possible way to avoid the big bang singularity. A successful Einstein static universe requires to be stable past eternally against both homogeneous and inhomogeneous scalar perturbations. In this paper, we study the stability of Einstein static universes in general scalar–tensor theory with non-minimal derivative coupling by analyzing scalar and tensor perturbations. Our results show that the Einstein static solutions are stable against both scalar and tensor perturbations, and the emergent scenario is viable to avoid the initial singularity in this theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chemical stability and superconductivity in Ag-sheathed CaKFe 4 As 4 superconducting tapes

Ag-sheathed CaKFe 4 As 4 superconducting tapes have been fabricated via the ex situ powder-in-tube method. X-ray diffraction analyses suggest that the CaKFe 4 As 4 phase reacts strongly with the silver sheath at temperature above 500 °C. We therefore anneal the tape at 500 °C and obtain a transport critical current density J c (4.2 K, 0 T) ~ 2.7 × 10 4 A cm –2 . The pinning potential derived from magnetoresistance measurements is one order of magnitude lower than that of the (Ba/Sr) 1–x K x Fe 2 As 2 tapes. Combining with the scanning electron microscopy and magneto-optical imaging results, we suggest that bad connectivity between superconducting grains caused by the low sintering temperature is the main factor responsible for the low J c . Furthermore, this system is still a promising candidate for superconducting wires and tapes if we find a compatible sheath material and further optimize the post-annealing process to achieve better grain connectivity.

36 MATERIALS SCIENCE↗