Search NASA⌕ Search

Engineering topics

Huang, Hui

Publications and source records attributed to Huang, Hui.

At least 37 records · Page 2

Progressive collapse analysis of stiffened panel structure with consideration of actual welding distortion and residual stresses

To date, inclusion of welding distortion and residual stresses in determining the strength of marine structures is based on empirical formulations due to welding complexity. In this study, a more feasible numerical model was developed from the perspective of inherent strain theory. The accuracy of this simplified numerical model was confirmed by transient thermo-elastic–plastic finite element analysis using a novel dynamic mesh refining and iterative substructure method which is 50 times faster than conventional finite element method. Welding distortion by the two numerical approaches was validated with experimental measurement. The collapse analyses indicated that the inherent strain model predicted a compressive strength and load-displacement curve with high accuracy, as validated by the transient thermo-mechanical model. The global stiffness and the ultimate strength of the welded structure would be overestimated by about 22% if no welding effects were considered. The proposed computation procedure for determining the ultimate strength of welded structures is accurate, simple, and practical and enables improvement of ultimate strength through optimization of welding joint design to reduce the welding residual stress and distortion.

Huang, Hui↗

An atlas of dynamic chromatin landscapes in mouse fetal development

The Encyclopedia of DNA Elements (ENCODE) project has established a genomic resource for mammalian development, profiling a diverse panel of mouse tissues at 8 developmental stages from 10.5 days after conception until birth, including transcriptomes, methylomes and chromatin states. Here we systematically examined the state and accessibility of chromatin in the developing mouse fetus. In total we performed 1,128 chromatin immunoprecipitation with sequencing (ChIP–seq) assays for histone modifications and 132 assay for transposase-accessible chromatin using sequencing (ATAC–seq) assays for chromatin accessibility across 72 distinct tissue-stages. We used integrative analysis to develop a unified set of chromatin state annotations, infer the identities of dynamic enhancers and key transcriptional regulators, and characterize the relationship between chromatin state and accessibility during developmental gene regulation. We also leveraged these data to link enhancers to putative target genes and demonstrate tissue-specific enrichments of sequence variants associated with disease in humans. The mouse ENCODE data sets provide a compendium of resources for biomedical researchers and achieve, to our knowledge, the most comprehensive view of chromatin dynamics during mammalian fetal development to date.

59 BASIC BIOLOGICAL SCIENCES↗

Spatiotemporal DNA methylome dynamics of the developing mouse fetus

Cytosine DNA methylation is essential for mammalian development but understanding of its spatiotemporal distribution in the developing embryo remains limited1,2. Here, as part of the mouse Encyclopedia of DNA Elements (ENCODE) project, we profiled 168 methylomes from 12 mouse tissues or organs at 9 developmental stages from embryogenesis to adulthood. We identified 1,808,810 genomic regions that showed variations in CG methylation by comparing the methylomes of different tissues or organs from different developmental stages. These DNA elements predominantly lose CG methylation during fetal development, whereas the trend is reversed after birth. During late stages of fetal development, non-CG methylation accumulated within the bodies of key developmental transcription factor genes, coinciding with their transcriptional repression. Integration of genome-wide DNA methylation, histone modification and chromatin accessibility data enabled us to predict 461,141 putative developmental tissue-specific enhancers, the human orthologues of which were enriched for disease-associated genetic variants. These spatiotemporal epigenome maps provide a resource for studies of gene regulation during tissue or organ progression, and a starting point for investigating regulatory elements that are involved in human developmental disorders.

59 BASIC BIOLOGICAL SCIENCES↗

In Situ and Post-Mortem Characterizations of Ultrasonic Spot Welded AZ31B and Coated Dual Phase 590 Steel Joints

Ultrasonic spot welding using different welding conditions was applied to join dissimilar metals of galvanized DP590 steel and AZ31B magnesium sheets. In situ high-speed imaging, digital image correlation, and infrared thermography were utilized to quantitatively study the interfacial relative motion, surface indentation, and heat generation across the joint faying interface and the sheet/sonotrode interfaces under the welding condition of moderate welding power and short welding time. For welds made with high power and long welding time, lap shear tensile tests as well as fatigue tests were carried out. Different fracture modes were observed after the lap shear tensile tests and fatigue tests performed under different peak loads. Post-weld cross-sectional analysis with scanning electron microscopy coupled with energy dispersive X-Ray spectroscopy revealed the variation of morphology and chemical composition at the joint interface for welds made with different welding conditions.

36 MATERIALS SCIENCE↗

Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing

In this study, we aim to advance the structural analysis of wire and arc additive manufacturing (WAAM) by considering the thermomechanical features inherent in direct energy deposition. Simulation approaches including the iterative substructure method (ISM), dynamic mesh refining method (DMRM), and graphics processing unit (GPU) based explicit finite element method (FEM) were developed for accelerating additive manufacturing stress analysis that is very time consuming by conventional numerical methods. ISM and DMRM take advantage of the strong nonlinearity phenomenon near the moving heat source by reducing the global iterations and refining the local mesh, respectively. In addition to the use of GPUs, the explicit FEM is accelerated by a time scaling technique based on the inherent strain concept. The residual stress and distortion of two large builds were analyzed, showing very consistent numerical results and good agreement with experiments. Compared with the commercial software Abaqus, the novel approaches reduced the computational cost substantially without compromising accuracy. The GPU code showed the highest computational efficiency (30~70×), while DMRM and ISM had acceleration factors of 9× and 3×, respectively. Finally, such high-fidelity modeling approaches will be very useful for building up a digital twin of WAAM to reduce development time and cost.

36 MATERIALS SCIENCE↗

Crystalline Structure-Dependent Mechanical and Thermoelectric Performance in Ag 2 Se 1–x S x System

Self-powered wearable electronics require thermoelectric materials simultaneously with a high dimensionless figure of merit (zT) and good flexibility to convert the heat discharged by the human body into electricity. Ag 2 (S,Se)-based semiconducting materials can well satisfy these requirements, and thus, they are attracting great attention in thermoelectric society recently. Ag 2 (S,Se) crystalizes in an orthorhombic structure or monoclinic structure, depending on the detailed S/Se atomic ratio, but the relationship between its crystalline structure and mechanical/thermoelectric performance is still unclear to date. In this study, a series of Ag 2 Se 1–x S x (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.45) samples were prepared and their mechanical and thermoelectric performance dependence on the crystalline structure was systematically investigated. x = 0.3 in the Ag 2 Se 1–x S x system was found to be the transition boundary between orthorhombic and monoclinic structures. Mechanical property measurement shows that the orthorhombic Ag 2 Se 1–x S x samples are brittle while the monoclinic Ag 2 Se 1–x S x samples are ductile and flexible. In addition, the orthorhombic Ag 2 Se 1–x S x samples show better electrical transport performance and higher zT than the monoclinic samples under a comparable carrier concentration, most likely due to their weaker electron-phonon interactions. This study sheds light on the further development of flexible inorganic TE materials.

36 MATERIALS SCIENCE↗

Efficient thermo-mechanical simulation approaches for arc-and-wire based additive manufacturing

This study aims at the thermo-mechanical features inherent with the arc and wire metal deposition process to advance the structural simulation of additive manufacturing. Simulation approaches including iterative substructure method (ISM), dynamic mesh refining method (DMRM), and graphics processing unit (GPU) based explicit FEM code (GPU code) were developed for accelerating stress analysis and compared in terms of efficiency and accuracy. ISM and DMRM both take advantage of the strong nonlinearity phenomenon near the moving heat source, by reducing the global iterations and refining the local mesh respectively. The explicit FEM code was accelerated by a mass scaling technique based on the inherent strain concept. Two large parts by wire and arc additive manufacturing were analyzed, and the numerical results agreed very well with each other. The predicted distortion and residual stresses in the deposited layers were validated by experimental measurement. Compared with commercial software ABAQUS, the novel approaches reduced the computation cost substantially without compromising on accuracy. GPU code shows the highest computation efficiency (x30~70), while DMRM and ISM has an acceleration factor of x9 and x3 respectively. Owing to the minimum model simplification, such advanced simulation approaches will be very useful for structural analysis of additive manufacturing with complex deposition paths and product geometry.

Huang, Hui↗

Ultrasonic welding of AZ31B magnesium alloy

This article overviews the ultrasonic welding process, a solid-state joining method, using the example of welding of a magnesium alloy as well as the joining of magnesium alloys in general. In situ high-speed imaging and infrared thermography were utilized to study interfacial relative motion and heat generation during ultrasonic spot welding of AZ31B magnesium (Mg) alloys. A postweld ultrasonic nondestructive evaluation was performed to study the evolution of local bond formation at the faying interface (contact surface of the joint between the top and bottom Mg sheets) at different stages of the welding process. Two distinct stages were observed as the welding process progresses. In the early stage, localized reciprocating sliding occurred at the contact faying interface between the two Mg sheets, resulting in localized rapid temperature rise from the localized frictional heating. Microscale (submillimeter) bonded regions at the Mg–Mg faying surface started to form, but the overall joint strength was low. Here, the early-stage localized bonds were broken during the subsequent vibrations. In the later stage, no relative motion occurred at any points of the faying interface. Localized bonded regions coalesced into a macroscale joint that was strong enough to prevent the Mg–Mg interface from further breakage and sliding. With increasing welding time, the bonded area continued to increase.

36 MATERIALS SCIENCE↗

Numerical study for prediction of optimum operational parameters in laser welding of NiTi alloy

Laser welding of NiTi alloy is a challenging process since it strongly affects the functionality of the material in the heat affected and fusion zones. Furthermore, the inherent thermal process can remarkably change the transformation temperature of NiTi alloy in the welding zone because of variation in the material composition. Accordingly, the laser parameters such as laser power and velocity effectively determine the quality of the welded component. The functional and mechanical behavior of the resulting welded NiTi parts can also be effectively improved by controlling laser parameters, and consequently, improve the weldability quality. The purpose of the present study was to establish a reliable finite element model to predict the thermal behavior induced by the laser welding process. Here, a numerical model was employed to estimate the optimum laser parameters, which can reduce the heat affected and the fusion regions and thus result in a better weld. The results of the finite element model show good accuracy compared to the experimental results including the transient temperature and the dimension of the heat affected and fusion zones. In addition, an Artificial Neural Network (ANN) approach was applied, as a predictable tool, to perform a nonlinear mapping between inputs and outputs of the welding process in order to find the optimum laser parameters.

36 MATERIALS SCIENCE↗

Heat generation and deformation in ultrasonic welding of magnesium alloy AZ31

A dual-sonotrode edge welding setup and a finite element analysis (FEA) model were developed for ultrasonic welding (USW) of AZ31 magnesium alloy sheets. Sonotrode vibration was measured quantitatively by a high-speed camera and introduced into the model as the driving force. The transient temperature field on the edge of the sheets was captured by an infrared camera. The heat generation mechanism in USW was investigated by a parametric study on the friction coefficient. Friction at faying interface should be smaller than those at other interfaces to enhance heat generation. The model was then validated by the experimental thermal history at the faying interface and the full temperature field as well as sonotrode indentation. Using the established model, USW under different welding powers (or vibration amplitudes) but at the same energy input was analyzed to characterize USW bond condition. Much higher temperature in the weld was observed with increasing vibration amplitudes, while reasonable indentation was maintained. Furthermore, vibration amplitude other than energy input was a critical factor in bond formation between AZ31 sheets.

36 MATERIALS SCIENCE↗

A dual-mesh method for efficient thermal stress analysis of large-scale welded structures

Transient thermo-mechanical analysis of welding problem requires tremendous computation cost. To accelerate the thermal analysis of large-scale welded structures, an efficient computation scheme based on heat transfer localization and dual meshes was proposed. The computation accuracy is guaranteed by a local fine mesh model with size determined by a theoretical solution and a global coarse mesh model with equivalent heat input. The validity and accuracy of the dual-mesh method were verified using an experimental bead-on-plate model. By extending the weld length, the computation time of the proposed method was proved to be almost linearly dependent on the model scale. The thermal analysis of fillet welding of a large panel structure with 6-m-long weld was accelerated by 10 times over conventional finite element analysis and 2.2 times over adaptive mesh method. Meanwhile, the physical memory consumption was also greatly reduced by the dual-mesh method. Such efficient computation method enables fast evaluation of welding stress and distortion which are vital for manufacturing process and structure performance.

36 MATERIALS SCIENCE↗

LaserOrigami (LO) of three-dimensional (3D) components: Experimental analysis and numerical modeling-part II

The present work explores how the choice of the scanning patterns can affect the final shapes of 3D components manufactured by laser-origami with a High-Power Diode Laser (HPDL). The experimental approach allowed the achievement of high bending angles, also avoiding any distortion on the surface of AISI 304 stainless steel workpiece. Optimization of the operational parameters led to the best prototype of the 3D components, with the closest respect of the strictest dimensional and geometrical tolerances. In addition, a thermo-mechanical model to predict the final shape of the 3D components was developed. The numerical model, implemented by Finite Element Method (FEM), was discovered to be a reliable tool in predicting the final shape of the prototypes, matching with a great deal of accuracy the experimental results. Specifically, the model allowed the estimation of the temperature distribution and nodal displacements of the components varying both the setting of the laser parameters and the choice of the scanning patterns.

47 OTHER INSTRUMENTATION↗

Finite Element Analysis and In-Situ Measurement of Out-of-Plane Distortion in Thin Plate TIG Welding

Transient distortion of thin plate in the welding process usually has a complicated mode and large magnitude. Quantitative measurement and prediction of full-field distortion are challenging and rarely reported up to now. In this study, the out-of-plane distortion of a thin plate during the Tungsten Inert Gas (TIG) welding process was measured using the digital image correlation (DIC) method. A simulation model based on thermal elastic–plastic finite element method (FEM) and DIC measured geometric imperfection were developed for accurate prediction of the transient welding distortion. The numerical results and experimental data agreed very well in both out-of-plane deformation modes and magnitudes of the plate at different stages of welding. The maximum out-of-plane distortion was larger than 4 mm during welding which can cause instability of arc length and heat input. The distance change between welding torch and plate surface was investigated under different initial deflections of the plate before welding. The plate with flat geometry shows the minimum transient and final gap change. In addition, the relationship between heat input and welding distortion was clarified through a series of numerical analyses. As a result, optimization of welding heat input can be performed based on numerical results to avoid excessive welding distortion.

36 MATERIALS SCIENCE↗

P-n heterostructured TiO2/NiO double-shelled hollow spheres for the photocatalytic degradation of papermaking wastewater

Highlights: • P-n heterostructured TiO{sub 2}/NiO double-shelled hollow spheres were prepared. • A cubic-structured NiO layer is grown on surface of anatase TiO{sub 2} hollow sphere. • TiO{sub 2}/NiO show high photocatalytic activity for papermaking wastewater degradation. • The COD{sub Cr} removal rate of wastewater reaches 98.1% after 6 h of photodegradation. - Abstract: P-n heterostructured TiO{sub 2}/NiO double-shelled hollow spheres were prepared through sol–gel and hydrothermal processes. TiO{sub 2}/NiO nanomaterials were comprehensively characterized, and the results reveal that a cubic-structured NiO layer is successfully grown on the surface of the anatase TiO{sub 2} hollow sphere to achieve a p-n heterostructure. The thickness of TiO{sub 2} shell is ∼20 nm, and that of NiO shell is 10–25 nm. Compared with the pure TiO{sub 2} hollow spheres, the prepared p-n heterostructures display a considerably higher photocatalytic activity for papermaking wastewater degradation under UV light irradiation. The chemical oxygen demand removal rate of papermaking wastewater reaches 98.1% after 6 h of photodegradation with DSTN2 as the photocatalyst. The enhanced photocatalytic activity is due to the synergetic effects of p-n heterostructures and the large specific surface area of the catalyst; these effects may promote the separation of photogenerated electron–hole pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Performance GPU-Based FEM Code for Simulating Welding and Additive Manufacturing

An in-house HPC finite element code with novel computational schemes provides fast and high-fidelity simulation capability for welding processes and allied manufacturing processes such as metal additive manufacturing. Benchmark comparison confirmed that, for the testing cases studied, the newly developed in-house code resulted in increases in computational speed in the ranges of 100x to 1000x depending on the size and complexity of the testing cases, when compared to today's commercial welding process simulation tools. For a reference problem in nuclear reactor repair welding, ORNL's in-house high fidelity code was able to complete the simulation in 3.2 days, which would take estimated 10 to 20 years using today's commercial code. Similar order of magnitudes of reduction in computational times for metal additive manufacturing process were also achieved.

Feng, Zhili↗

miR-190 promotes HCC proliferation and metastasis by targeting PHLPP1

Highlights: • miR-190 enhances the proliferation and metastasis of HCC. • miR-190 specifically inhibits PHLPP1 expression. • miR-190 may serve as a potential target and marker for HCC treatment. miRNAs regulate gene expression and enable clinicians to distinguish between benign and malignant tissues in cancers. PH domain leucine-rich repeat-containing protein phosphatase 1 (PHLPP1) is known to be a tumour suppressor. A lentiviral overexpression system was used to stably express miR-190, leading to the enhancement of hepatocellular carcinoma (HCC) proliferation and metastasis as a result of inhibited PHLPP1 expression. The results showed that stable miR-190 expression increased the expression of EMT-related proteins (Snail and TCF8/ZEB1) as well as the phosphorylation of Akt at Ser473 and the expression of a disintegrin and metalloproteinase with thrombospondin motifs 1 (ADAMTS1). However, restoring PHLPP1 expression counteracted the effects of miR-190 on HCC proliferation, migration and invasion. The results of the animal experiments showed that miR-190 improved the HepG2 cell tumour formation and lung metastasis ability. Stable miR-190 overexpression leads to the downregulation of PHLPP1 protein expression. miR-190 has potential as a target in the treatment and diagnosis of HCC.

60 APPLIED LIFE SCIENCES↗

High Performance Computing Tools to Advance Materials Joining Technology

In this project, an in-house HPC finite element code was developed with novel computational schemes that provided fast and high-fidelity simulation capability for welding processes and allied manufacturing processes such as metal additive manufacturing processes. Benchmark comparison confirmed that, for the testing cases studied, the newly developed in-house code resulted in increases in computational speed in the ranges of 100x to 1000x depending on the size and complexity of the testing cases, when compared to today’s commercial welding process simulation tools. As demonstrated by the selected examples in this report, the breakthrough increases in computational simulation speeds achieved by the in-house HPC code means that high fidelity simulations of certain complex welding problems that would require months even years of computational time with today’s commercial code could be solved in two to three days. Similar order of magnitudes of reduction in computational times for metal additive manufacturing process were also achieved.

36 MATERIALS SCIENCE↗

Prediction of residual stresses in a multipass pipe weld by a novel 3D finite element approach

Due to enormous computation cost, current residual stress simulation of multipass girth welds are mostly performed using two-dimensional (2D) axisymmetric models. The 2D model can only provide limited estimation on the residual stresses by assuming its axisymmetric distribution. In this study, a highly efficient thermal-mechanical finite element code for three-dimensional (3D) model has been developed based on high performance Graphics Processing Unit (GPU) computers. Our code is further accelerated by considering the unique physics associated with welding processes that are characterized by steep temperature gradient and a moving arc heat source. It is capable of modeling large-scale welding problems that cannot be easily handled by the existing commercial simulation tools. To demonstrate the accuracy and efficiency, our code was compared with a commercial software by simulating a 3D multi-pass girth weld model with over 1 million elements. Our code achieved comparable solution accuracy with respect to the commercial one but with over 100 times saving on computational cost. Moreover, the three-dimensional analysis demonstrated more realistic stress distribution that is not axisymmetric in hoop direction.

Huang, Hui↗