Engineering topics

Huang, Norden E.

Publications and source records attributed to Huang, Norden E..

31 records · Page 2

NASA NTRS2001

A New Method for Nonlinear and Nonstationary Time Series Analysis: The Empirical Mode Decomposition Method

A new method for analyzing nonlinear and nonstationary data has been developed. The key part of the method is the Empirical Mode Decomposition method with which any complicated data set can be decomposed into a finite and often small number of Intrinsic Mode Functions (IMF). An IMF is defined as any function having the same numbers of zero-crossing and extrema, and also having symmetric envelopes defined by the local maxima and minima respectively. The IMF also admits well-behaved Hilbert transform. This decomposition method is adaptive, and, therefore, highly efficient. Since the decomposition is based on the local characteristic time scale of the data, it is applicable to nonlinear and nonstationary processes. With the Hilbert transform, the Intrinsic Mode Functions yield instantaneous frequencies as functions of time that give sharp identifications of imbedded structures. The final presentation of the results is an energy-frequency-time distribution, designated as the Hilbert Spectrum. Classical nonlinear system models are used to illustrate the roles played by the nonlinear and nonstationary effects in the energy-frequency-time distribution.

Huang, Norden E.↗

NASA NTRS2001

Applications of the Hilbert-Huang Transform

A new method, the Hilbert-Huang Transform, has been developed for analyzing nonlinear and nonstationary data. The key part of the method is the Empirical Mode Decomposition with which any complicated data set can be decomposed into a finite and often small number of Intrinsic Mode Functions (IMF). An M is defined as any function having the same numbers of zero-crossing and extrema, and also having symmetric envelopes defined by the local maxima and minima respectively. The IMF also admits well-behaved Hilbert transform. This decomposition method is adaptive, and, therefore, highly efficient. Since the decomposition is based on the local characteristic time scale of the data, it is applicable to nonlinear and nonstationary processes. With the Hilbert transform, the Intrinsic Mode Functions yield instantaneous frequencies'as functions of time that give sharp identifications of imbedded structures. The final presentation of the results is an energy-frequency-time distribution, designated as the Hilbert Spectrum. With this technique we can examine the detailed dynamics characteristics of a nonlinear system through the instantaneous frequency rather than harmonics. Thus it constitutes a new view of the nonlinear dynamics. Examples of classic nonlinear equations and other nonlinear and nonstationary data sets will be used as examples to illustrate the advantage of the application of this new data analysis method.

Huang, Norden E.↗

NASA NTRS2001

On the Application of Hilbert Spectral Analysis for Climate Studies

The Hilbert spectral analysis (Huang et al, 1998, Proceedings of the Royal Society of London, A 454, pp 903-995) consisted of two steps: First, the data has to be reduced into a finite number of Intrinsic Mode Function by the Empirical Mode Decomposition method, then the resulting Intrinsic Mode Functions are converted to time-frequency-energy distribution through Hilbert transform. In this approach, the Empirical Mode Functions served as the basis functions with which the data is expanded. This basis function is adaptive, and the decomposition is nonlinear. Furthermore, as the Hilbert transform is a singular transform, it retains a high degree of local information. The instantaneous frequency is determined by differentiation of the phase function; therefore, there is no restriction of the 'uncertainty principle' for all the time-frequency analysis resulting from a priori basis approach. With the adaptive basis and the instantaneous frequency, the Hilbert Spectral analysis can represent data from nonlinear and nonstationary processes without resorting to the harmonics. Another advantage of using instantaneous frequency is the ability to find out frequency from limited length of data, which is a critical problem in climate studies. As the processes driving the climate changes could be both nonlinear and nonstationary, the Hilbert Spectral Analysis could be of great use in examining the underlying mechanisms. A preliminary study based on the length of day data will be presented as example for the application of the Hilbert Spectral Analysis for climate study.

Huang, Norden E.↗

NASA NTRS2000

A Bridge Health Monitoring Method Using the Hilbert-Huang Transform: A Case Study

We have developed a new method for nondestructive instrument method to monitor the health of a bridge. This new method is based on a transient test load and simple data collection. The nuclear of the method is the new invented nonstationary and nonlinear time series analysis method, the Empirical Mode Decomposition and Hilbert Spectral Analysis. The final decision on the health of the bridge structure is based on the nonlinear characteristic of the data, and on the comparison between the free and the forced vibration frequencies. Thus this alternative method enjoys many advantages: (1) no a priori data required, (2) simple data collection, and (3) minimum traffic disruption. Results from a case study of the Shing-Nan Bridge in Hou-Wei will be reported.

Huang, Norden E.↗

NASA NTRS1999

Computer implemented empirical mode decomposition method, apparatus and article of manufacture

A computer implemented physical signal analysis method is invented. This method includes two essential steps and the associated presentation techniques of the results. All the steps exist only in a computer: there are no analytic expressions resulting from the method. The first step is a computer implemented Empirical Mode Decomposition to extract a collection of Intrinsic Mode Functions (IMF) from nonlinear, nonstationary physical signals. The decomposition is based on the direct extraction of the energy associated with various intrinsic time scales in the physical signal. Expressed in the IMF's, they have well-behaved Hilbert Transforms from which instantaneous frequencies can be calculated. The second step is the Hilbert Transform. The final result is the Hilbert Spectrum. Thus, the invention can localize any event on the time as well as the frequency axis. The decomposition can also be viewed as an expansion of the data in terms of the IMF's. Then, these IMF's, based on and derived from the data, can serve as the basis of that expansion. The local energy and the instantaneous frequency derived from the IMF's through the Hilbert transform give a full energy-frequency-time distribution of the data which is designated as the Hilbert Spectrum.

Huang, Norden E.↗

NASA NTRS1999

A New Method for Nonlinear and Nonstationary Time Series Analysis and Its Application to the Earthquake and Building Response Records

A new method for analyzing nonlinear and nonstationary data has been developed. The key part of the method is the Empirical Mode Decomposition method with which any complicated data set can be decomposed into a finite and often small number of Intrinsic Mode Functions (IMF). An IMF is defined as any function having the same numbers of zero-crossing and extrema, and also having symmetric envelopes defined by the local maxima and minima respectively. The IMF also admits well-behaved Hilbert transform. This decomposition method is adaptive, and, therefore, highly efficient. Since the decomposition is based on the local characteristic time scale of the data, it is applicable to nonlinear and nonstationary processes. With the Hilbert transform, the Intrinsic Mode Functions yield instantaneous frequencies as functions of time that give sharp identifications of imbedded structures. The final presentation of the results is an energy-frequency-time distribution, designated as the Hilbert Spectrum, Example of application of this method to earthquake and building response will be given. The results indicate those low frequency components, totally missed by the Fourier analysis, are clearly identified by the new method. Comparisons with Wavelet and window Fourier analysis show the new method offers much better temporal and frequency resolutions.

Huang, Norden E.↗

NASA NTRS1999

A Critical Examination of Wind-Wave Spectral Functional Form

Traditionally, data from random ocean waves are presented in spectral functions. The spectra are the result of Fourier analysis. Fourier spectral analysis has dominated data analysis for, at least, the last hundred years. It has been the standard method for is examining the global amplitude-frequency distributions. Although Fourier transform valid under extremely general conditions, there are some crucial restrictions for the Fourier spectral analysis. The system must be linear, and the data must be stationary- otherwise, the resulting spectrum will make little physical sense. The stationarity requirement is also a common required criterion for most of other available data analysis methods. Nevertheless, few, if any, natural phenomena are linear and stationary. To compound these complications is the imperfection of our probes or numerical schemes the interactions of the imperfect probes even with a perfect linear system can make the final data nonlinear. Furthermore, all the available data are usually of finite duration. Under these conditions, Fourier analysis is of limited use, For lack of alternatives, however, Fourier analysis is still used to process such data. The loose application of Fourier analysis and the insouciant adoption of the stationary and linear assumptions may lead to misleading conclusions. Ocean waves are know to be nonlinear, and the wind system generating the wave field are seldom stationary- As a result, the traditional examination of the spectral form hardly made physical sense. A new method for analyzing nonlinear and nonstationary data has been developed. The key part is the Empirical Mode Decomposition (EMD) method with which any complicated data set can be decomposed into a finite and often small number of Intrinsic Mode Functions (IMF) that serve as the basis of the representation of the data, This decomposition method is adaptive, and, therefore, highly efficient. The IMFs admit well-behaved Hilbert transforms, and yield instantaneous energy and frequency as functions of time that give sharp identifications of imbedded structures. The final presentation of the results is an energy-frequency-time distribution, designated as the Hilbert Spectrum. Among the main conceptual innovations is the introduction of the instantaneous frequencies for complicated data sets, which eliminate the need of spurious harmonics to represent nonlinear and nonstationary signals. The spectral forms of the ocean waves are very different. This new method offers the first physical meaningful view of the wave spectrum. Data from laboratory and field will be presented to illustrate the differences.

Huang, Norden E.↗

NASA NTRS1998

Empirical Mode Decomposition and Hilbert Spectral Analysis

The difficult facing data analysis is the lack of method to handle nonlinear and nonstationary time series. Traditional Fourier-based analyses simply could not be applied here. A new method for analyzing nonlinear and nonstationary data has been developed. The key part is the Empirical Mode Decomposition (EMD) method with which any complicated data set can be decomposed into a finite and often small number of Intrinsic Mode Functions (IMF) that serve as the basis of the representation of the data. This decomposition method is adaptive, and, therefore, highly efficient. The IMFs admit well-behaved Hilbert transforms, and yield instantaneous energy and frequency as functions of time that give sharp identifications of imbedded structures. The final presentation of the results is an energy-frequency-time distribution, designated as the Hilbert Spectrum. Among the main conceptual innovations is the introduction of the instantaneous frequencies for complicated data sets, which eliminate the need of spurious harmonics to represent nonlinear and nonstationary signals. Examples from the numerical results of the classical nonlinear equation systems and data representing natural phenomena are given to demonstrate the power of this new method. The classical nonlinear system data are especially interesting, for they serve to illustrate the roles played by the nonlinear and nonstationary effects in the energy-frequency-time distribution.

Huang, Norden E.↗

NASA NTRS1994

Directional wind wave development

Using aircraft radar instruments designed for sea surface wave measurements, we have obtained fetch-limited directional wind wave spectra under steady off-shore wind conditions. The results from these observations in different areas at different times show that, up to a fetch of 150 km, the dominant waves propagate at an angle to the wind. The angle is near to that suggested by the Phillips resonance wind wave generation condition, but with one important difference: The waves are not always symmetric to the left and right of the wind. Most of the cases show the eventual dominance of one side lobe. The asymmetry of the wave direction relative to the wind suggests that the surface wind stress vector may not always be parallel to the mean wind direction.

Long, Steven R.↗

NASA NTRS1993

Newly found evidence of Sun-climate relationships

Solar radiation cycles drive climatic changes intercyclically. These interdecadal changes were detected as variations in solar total irradiances over the time period of recorded global surface-air-temperature (SAT) and have been restored utilizing Earth Radiation Budget Channel 10C measurements (1978-1990), Greenwich Observatory faculae data (1874-1975), and Taipei Observatory Active Region data (1964-1991). Analysis of the two separate events was carried out by treating each as a discrete time series determined by the length of each solar cycle. The results show that the global SAT responded closely to the input of solar cyclical activities, S, with a quantitative relation of T = 1.62 * S with a correlation coefficient of 0.61. This correlation peaks at 0.71 with a built-in time lag of 32 months in temperature response. Solar forcing in interannual time scale was also detected and the derived relationship of T = 0.17 * S with a correlation coefficient of 0.66 was observed. Our analysis shows derived climate sensitivities approximately fit the theoretical feedback slope, 4T(sup 3).

Kim, Hongsuk H.↗

NASA NTRS1992

The local properties of ocean surface waves by the phase-time method

A new approach using phase information to view and study the properties of frequency modulation, wave group structures, and wave breaking is presented. The method is applied to ocean wave time series data and a new type of wave group (containing the large 'rogue' waves) is identified. The method also has the capability of broad applications in the analysis of time series data in general.

Huang, Norden E.↗

NASA NTRS1989

Laboratory studies of wave-current interaction - Kinematics of the strong interaction

Controlled laboratory experiments have been conducted to study the kinematics of wave-current interactions. The results confirm the conservation of waves under the steady state condition. The data also show that the kinematic effect of the current on waves can be treated as a simple Doppler shift. After the Doppler correction, the kinematics of the waves (either breaking or nonbreaking) follow the linear theory very well.

Lai, Ronald J.↗

NASA NTRS1988

Observations of the properties of the water surface roughness structure under the action of wind and waves

The statistical properties of a water surface roughness structure subjected to wind and waves are analyzed in a laboratory wind wave channel. The surface slope is derived using elevation measurements and the pitot tube is employed to measure wind speed. The transient responses of the surface slope to a calm condition and low, medium, and high wind conditions are studied. Two methods for determining a critical wind speed range are described.

Long, Steven R.↗