Engineering topics
Huang, Weixin
Publications and source records attributed to Huang, Weixin.
Designing Ceria/Alumina for Efficient Trapping of Platinum Single Atoms
Cerium oxide (ceria) has been shown to be very effective at trapping platinum atoms, due to formation of stable surface complexes at step edges, where coordinatively unsaturated cerium cations are present. But ceria loses its effectiveness when heated to high temperatures, due to loss of surface area and growth in particle size associated with sintering of the oxide. Being a rare-earth, and with limited supplies worldwide, it is important to develop methods to improve the effectiveness of ceria as a catalyst support. Here we explore the performance for trapping Pt atoms when the ceria is supported on a high surface area alumina carrier. This helps create a more sustainable catalyst formulation, especially if we can retain the high dispersion of Pt seen on ceria supports. For this work, we studied the atom trapping efficacy of ceria/alumina samples with increasing ceria content (8 wt% - 50%) and contrasted the behavior with pure ceria. Electron microscopy reveals that when dispersed on alumina, ceria is present in the form of crystalline nanoparticles as well as isolated cerium ions. These two forms of ceria differ markedly in their ability to trap Pt atoms. Atomically dispersed cerium is present in the form of Ce 3+ cations on alumina, however this form of ceria is not effective for trapping Pt atoms. Our results show that the atom trapped Pt resides primarily on crystalline ceria nanoparticles. CO oxidation was used as a probe reaction to evaluate the performance of these Pt AT /ceria-alumina catalysts. As a result, we conclude that over the range of ceria loadings we investigated, 50% ceria/alumina represents the optimal catalyst support for achieving high surface area and atom trapping efficiency while helping reduce the total ceria content in this catalyst system.
Multiple Promotional Effects of Vanadium Oxide on Boron Nitride for Oxidative Dehydrogenation of Pro
Explore the source record for details and available documents.
Grafting nanometer metal/oxide interface towards enhanced low-temperature acetylene semi-hydrogenation
Metal/oxide interface is of fundamental significance to heterogeneous catalysis because the seemingly “inert” oxide support can modulate the morphology, atomic and electronic structures of the metal catalyst through the interface. The interfacial effects are well studied over a bulk oxide support but remain elusive for nanometer-sized systems like clusters, arising from the challenges associated with chemical synthesis and structural elucidation of such hybrid clusters. We hereby demonstrate the essential catalytic roles of a nanometer metal/oxide interface constructed by a hybrid Pd/Bi 2 O 3 cluster ensemble, which is fabricated by a facile stepwise photochemical method. The Pd/Bi 2 O 3 cluster, of which the hybrid structure is elucidated by combined electron microscopy and microanalysis, features a small Pd-Pd coordination number and more importantly a Pd-Bi spatial correlation ascribed to the heterografting between Pd and Bi terminated Bi 2 O 3 clusters. The intra-cluster electron transfer towards Pd across the as-formed nanometer metal/oxide interface significantly weakens the ethylene adsorption without compromising the hydrogen activation. As a result, a 91% selectivity of ethylene and 90% conversion of acetylene can be achieved in a front-end hydrogenation process with a temperature as low as 44 °C.
Steam-created grain boundaries for methane C–H activation in palladium catalysts
Defects may display high reactivity because the specific arrangement of atoms differs from crystalline surfaces. We demonstrate that high-temperature steam pretreatment of palladium catalysts provides a 12-fold increase in the mass-specific reaction rate for carbon-hydrogen (C–H) activation in methane oxidation compared with conventional pretreatments. Through a combination of experimental and theoretical methods, we demonstrate that an increase in the grain boundary density through crystal twinning is achieved during the steam pretreatment and oxidation and is responsible for the increased reactivity. The grain boundaries are highly stable during reaction and show specific rates at least two orders of magnitude higher than other sites on the palladium on alumina (Pd/Al 2 O 3 ) catalysts. Theoretical calculations show that strain introduced by the defective structure can enhance C–H bond activation. Introduction of grain boundaries through laser ablation led to further rate increases.
Highly Selective Acetylene Semihydrogenation Catalyst with an Operation Window Exceeding 150 °C
The operating window (OW) is a primary performance criterion for the selective hydrogenation of acetylene in excess ethylene. Currently, most state-of-the-art catalyst systems have an OW of less than 50 °C in front-end processes. Selective acetylene hydrogenation catalysts with an OW wider than 100 °C are rare. Here, we demonstrate a facile stepwise chemical method to synthesize calcite-supported PdBi intermetallic compounds (PdBi/Calcite) that feature isolated and electron-rich Pd atoms as active sites for acetylene hydrogenation. Beneficial from the extremely weak ethylene absorption abilities and the stable structures against the formation of β-PdH x , PdBi/Calcite exhibit >99% selectivity to C 2 H 4 in the whole temperature range tested (50–300 °C) and ~100% C 2 H 2 conversion from 150 to 300 °C. Finally, as a result, an operation window exceeding 150 °C has been achieved.
Radical Chemistry and Reaction Mechanisms of Propane Oxidative Dehydrogenation over Hexagonal Boron Nitride Catalysts
Abstract Although hexagonal boron nitride (h‐BN) has recently been identified as a highly efficient catalyst for the oxidative dehydrogenation of propane (ODHP) reaction, the reaction mechanisms, especially regarding radical chemistry of this system, remain elusive. Now, the first direct experimental evidence of gas‐phase methyl radicals (CH 3 . ) in the ODHP reaction over boron‐based catalysts is achieved by using online synchrotron vacuum ultraviolet photoionization mass spectroscopy (SVUV‐PIMS), which uncovers the existence of gas‐phase radical pathways. Combined with density functional theory (DFT) calculations, the results demonstrate that propene is mainly generated on the catalyst surface from the C−H activation of propane, while C 2 and C 1 products can be formed via both surface‐mediated and gas‐phase pathways. These observations provide new insights towards understanding the ODHP reaction mechanisms over boron‐based catalysts.
Radical Chemistry and Reaction Mechanisms of Propane Oxidative Dehydrogenation over Hexagonal Boron Nitride Catalysts
Although hexagonal boron nitride (h-BN) has recently been identified as a highly efficient catalyst for the oxidative dehydrogenation of propane (ODHP) reaction, the reaction mechanisms, especially regarding radical chemistry of this system, remain elusive. Now, the first direct experimental evidence of gas-phase methyl radicals (CH 3 . ) in the ODHP reaction over boron-based catalysts is achieved by using online synchrotron vacuum ultraviolet photoionization mass spectroscopy (SVUV-PIMS), which uncovers the existence of gas-phase radical pathways. Combined with density functional theory (DFT) calculations, the results demonstrate that propene is mainly generated on the catalyst surface from the C-H activation of propane, while C 2 and C 1 products can be formed via both surface-mediated and gas-phase pathways. These observations provide new insights towards understanding the ODHP reaction mechanisms over boron-based catalysts.
Activation and surface reactions of CO and H 2 on ZnO powders and nanoplates under CO hydrogenation reaction conditions
Here, activation and surface reactions of CO and H 2 on ZnO powders and nanoplates under CO hydrogenation reaction conditions were (quasi) in situ studied using temperature programmed surface reaction spectra, diffuse reflectance Fourier transform infrared spectroscopy, inelastic neutron scattering spectroscopy and electron paramagnetic resonance. CO undergoes disproportion reaction to produce gaseous CO 2 and surface carbon adatoms, and adsorbs to form surface formate species. H 2 adsorption forms dominant irreversibly-adsorbed surface hydroxyl groups and interstitial H species and very minor surface Zn-H species. Surface formate species and hydroxyl groups react to produce CO 2 and H 2 , while surface carbon adatoms are hydrogenated by surface Zn-H species sequentially to produce CH(a), CH 2 (a), CH 3 (a) and eventually gaseous CH 4 . The ZnO nanoplates, exposing a higher fraction of Zn-ZnO(0001) and O-ZnO(000–1) polar facets, are more active than the ZnO powders to catalyze CO hydrogenation to CH 4 . These results provide fundamental understanding of the reaction mechanisms and structural effects of CO hydrogenation reaction catalyzed by ZnO-based catalysts.