Search NASA⌕ Search

Engineering topics

Hudak, Bethany M.

Publications and source records attributed to Hudak, Bethany M..

Detection of defects in atomic-resolution images of materials using cycle analysis

The automated detection of defects in high-angle annular dark-field Z-contrast (HAADF) scanning-transmission-electron microscopy (STEM) images has been a major challenge. Here, we report an approach for the automated detection and categorization of structural defects based on changes in the material’s local atomic geometry. The approach applies geometric graph theory to the already-found positions of atomic-column centers and is capable of detecting and categorizing any defect in thin diperiodic structures (i.e., “2D materials”) and a large subset of defects in thick diperiodic structures (i.e., 3D or bulk-like materials). Despite the somewhat limited applicability of the approach in detecting and categorizing defects in thicker bulk-like materials, it provides potentially informative insights into the presence of defects. The categorization of defects can be used to screen large quantities of data and to provide statistical data about the distribution of defects within a material. This methodology is applicable to atomic column locations extracted from any type of high-resolution image, but here we demonstrate it for HAADF STEM images.

36 MATERIALS SCIENCE↗

Evolution of lattice defects upon Bi-doping of epitaxial Si overlayers on Si(1 0 0)

Single Bi dopants in Si exhibit promising properties for quantum information science. Here we study, as a function of Bi-doped Si film thickness, the evolution and ultimate removal of lattice defects that are associated with a recently demonstrated viable route to precisely incorporate Bi dopants in homoepitaxial Si thin films. Scanning tunneling microscopy imaging reveals how the elongated defect structures in the Si lattice, originating from prefabricated Bi nanolines on the substrate surface that are the source of the Bi dopants, evolve with increasing Si overlayer thickness. Moreover, we demonstrate that a prolonged low-temperature annealing is able to annihilate these defect structures while leaving a significant Bi dopant concentration in the Si films.

36 MATERIALS SCIENCE↗

Atom-by-atom fabrication with electron beams

Assembling matter atom-by-atom into functional devices is the ultimate goal of nanotechnology. The possibility of achieving this goal is intrinsically dependent on the ability to visualize matter at the atomic level, induce and control atomic-scale motion, facilitate and direct chemical reactions, and coordinate and guide fabrication processes towards desired structures atom-by-atom. In this Perspective, we summarize recent progress in chemical transformations, material alterations and atomic dynamics studies enabled by the converged, atomic-sized electron beam of an aberration-corrected scanning transmission electron microscope. We discuss how such top-down observations have led to the concept of controllable, beam-induced processes and then of bottom-up, atom-by-atom assembly via electron-beam control. Finally, the progress in this field, from electron-beam-induced material transformations to atomically precise doping and multi-atom assembly, is reviewed, as are the associated engineering, theoretical and big-data challenges.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Observation of Square-Planar Distortion in Lanthanide-Doped Skutterudite Crystals

Skutterudite crystals are of interest for their thermoelectric properties and in particular for the flexibility the structure offers for tuning such properties. One strategy to enhance the thermoelectric capabilities of these structures is to dope the “cage” site to disrupt phonon modes. Observation of such changes in these structures on the atomic scale is challenging, however, and understanding atomic-scale changes is crucial to understanding its macroscopic properties. Here, a series of polycrystalline Co2Ni2Sb8Sn4 skutterudites doped with Ce, Dy, and Yb were synthesized. Using scanning transmission electron microscopy, we observe small tilts in the square-planar Sb–Sn rings. Using density functional theory to calculate a relaxed structure, we attribute these distortions to under-bonding of the rings with the lanthanide dopants.

36 MATERIALS SCIENCE↗

Shell-Induced Ostwald Ripening: Simultaneous Structure, Composition, and Morphology Transformations during the Creation of Hollow Iron Oxide Nanocapsules

The creation of nanomaterials requires simultaneous control of not only crystalline structure and composition but also crystal shape and size, or morphology, which can pose a significant synthetic challenge. Approaches to address this challenge include creating nanocrystals whose morphologies echo their underlying crystal structures, such as the growth of platelets of two-dimensional layered crystal structures, or conversely attempting to decouple the morphology from structure by converting a structure or composition after first creating crystals with a desired morphology. A particularly elegant example of this latter approach involves the topotactic conversion of a nanoparticle from one structure and composition to another, since the orientation relationship between the initial and final product allows the crystallinity and orientation to be maintained throughout the process. Here we report a mechanism for creating hollow nanostructures, illustrated via the decomposition of β-FeOOH nanorods to nanocapsules of α-Fe 2 O 3 , γ-Fe 2 O 3 , Fe 3 O 4 , and FeO, depending on the reaction conditions, while retaining single-crystallinity and the outer nanorod morphology. Using in situ TEM, we demonstrate that the nanostructured morphology of the starting material allows kinetic trapping of metastable phases with a topotactic relationship to the final thermodynamically stable phase.

36 MATERIALS SCIENCE↗

Direct Imaging of Low-Dimensional Nanostructures

Low-dimensional nanostructures are technologically desirable for their novel physical properties, as well as the benefits of packing density due to scale. In quantum computing, an ideal structure might consist of single dopant atoms precisely positioned a few nanometers below a surface [1]. There is also a need for truly atomic-scale interconnects and ancillary structures. However, due to their nanoscale dimensions, the physical properties of nanowires and related structures will depend on the environment in which they are embedded as well as their composition. This problem is particularly relevant for samples grown on ultra-clean surfaces, which may not survive outside of high-vacuum systems or which might be substantially affected by adatoms. The question then arises as to what happens to surface nanostructures or single dopant atoms during encapsulation or overgrowth.

36 MATERIALS SCIENCE↗

Direct atomic fabrication and dopant positioning in Si using electron beams with active real-time image-based feedback

We report that semiconductor fabrication is a mainstay of modern civilization, enabling the myriad applications and technologies that underpin everyday life. However, while sub-10 nanometer devices are already entering the mainstream, the end of the Moore's law roadmap still lacks tools capable of bulk semiconductor fabrication on sub-nanometer and atomic levels, with probe-based manipulation being explored as the only known pathway. Here we demonstrate that the atomic-sized focused beam of a scanning transmission electron microscope can be used to manipulate semiconductors such as Si on the atomic level, inducing growth of crystalline Si from the amorphous phase, reentrant amorphization, milling, and dopant front motion. These phenomena are visualized in real-time with atomic resolution. We further implement active feedback control based on real-time image analytics to automatically control the e-beam motion, enabling shape control and providing a pathway for atom-by-atom correction of fabricated structures in the near future. Lastly, these observations open a new epoch for atom-by-atom manufacturing in bulk, the long-held dream of nanotechnology.

36 MATERIALS SCIENCE↗

Homo-endotaxial one-dimensional Si nanostructures

One-dimensional (1D) nanostructures are highly sought after, both for their novel electronic properties as well as for their improved functionality. However, due to their nanoscale dimensions, these properties are significantly affected by the environment in which they are embedded. Here in this paper, we report on the creation of 1D homo-endotaxial Si nanostructures, i.e. 1D Si nanostructures with a lattice structure that is uniquely different from the Si diamond lattice in which they are embedded. We use scanning tunneling microscopy and spectroscopy, scanning transmission electron microscopy, density functional theory, and conductive atomic force microscopy to elucidate their formation and properties. Depending on kinetic constraints during growth, they can be prepared as endotaxial 1D Si nanostructures completely embedded in crystalline Si, or underneath a stripe of amorphous Si containing a large concentration of Bi atoms. Lastly, these homo-endotaxial 1D Si nanostructures have the potential to be useful components in nanoelectronic devices based on the technologically mature Si platform.

36 MATERIALS SCIENCE↗

Real-time atomistic observation of structural phase transformations in individual hafnia nanorods

High-temperature phases of hafnium dioxide have exceptionally high dielectric constants and large bandgaps, but quenching them to room temperature remains a challenge. Scaling the bulk form to nanocrystals, while successful in stabilizing the tetragonal phase of isomorphous ZrO 2 , has produced nanorods with a twinned version of the room temperature monoclinic phase in HfO 2 . Here we use in situ heating in a scanning transmission electron microscope to observe the transformation of an HfO 2 nanorod from monoclinic to tetragonal, with a transformation temperature suppressed by over 1000°C from bulk. When the nanorod is annealed, we observe with atomic-scale resolution the transformation from twinned-monoclinic to tetragonal, starting at a twin boundary and propagating via coherent transformation dislocation; the nanorod is reduced to hafnium on cooling. Unlike the bulk displacive transition, nanoscale size-confinement enables us to manipulate the transformation mechanism, and we observe discrete nucleation events and sigmoidal nucleation and growth kinetics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Simple synthetic route to manganese-containing nanowires with the spinel crystal structure

This report describes a new route to synthesize single-crystalline manganese-containing spinel nanowires (NWs) by a two-step hydrothermal and solid-state synthesis. Interestingly, a nanowire or nanorod morphology is maintained during conversion from MnO{sub 2}/MnOOH to CuMn{sub 2}O{sub 4}/Mg{sub 2}MnO{sub 4}, despite the massive structural rearrangement this must involve. Linear sweep voltammetry (LSV) curves of the products give preliminary demonstration that CuMn{sub 2}O{sub 4} NWs are catalytically active towards the oxygen evolution reaction (OER) in alkaline solution, exhibiting five times the magnitude of current density found with pure carbon black. - Highlights: • Synthesis of single-crystalline manganese-containing spinel nanowires. • Binary oxide nanowire converted to ternary oxide wire through solid state reaction. • Approach to structure conversion with shape retention could be generally applicable. • Copper and Manganese display multiple oxidation states with potential for catalysis. • CuMn{sub 2}O{sub 4} nanowires show promise as catalysts for the oxygen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗