Engineering topics

Hudgins, J. L.

Publications and source records attributed to Hudgins, J. L..

5 records

NASA NTRS1982

Apparatus for sequentially transporting containers

Apparatus for transferring and manipulating a plurality of containers in a sequence is disclosed including a mechanical manipulator arm having a gripping device which automatically picks up a container at a fixed pickup position P and transfers it to a processing station. At a processing station X, the container is loaded with silicon wafers and thereafter returned by the arm to the fixed position P at the pickup and return station Y. A plurality of the containers may be processed in sequence from the fixed pickup position by providing a movable carriage upon which container pedestal platforms are supported, at least one of which is an elevator platform. The platforms include abutments for properly positioning the containers for accurate pickup by the manipulator arm.

Hudgins, J. L.↗

NASA NTRS1980

Detecting a coal/shale interface

Detector, intended for use with longwall shearer, determines when cut has pierced through coal layer. Accelerometer measures hardness of material struck by penetrometer ram, while reflectometers measure reflectivity of surface on either side of penetrometer. Signals are combined in voting circuit that indicates "coal" or "shale", depending on information supplied by three sensors. It distinguishes by differences in accelerometer waveforms.

Broussard, P. H.↗

NASA NTRS1979

Remote manipulator for IC wafers

Mechanical manipulator automatically loads, transports, and unloads silicon wafers between processing stations in large-scale integrated-circuit fabrication facility at Marshall Space Flight Center thus eliminating need for human opeators at various stages in processing cycle. It also reduces possibility of wafer contamination.

Hudgins, J. L.↗

NASA NTRS1979

Coal-shale interface detection system

A coal-shale interface detection system for use with coal cutting equipment consists of a reciprocating hammer on which an accelerometer is mounted to measure the impact of the hammer as it penetrates the ceiling or floor surface of a mine. A pair of reflectometers simultaneously view the same surface. The outputs of the accelerometer and reflectometers are detected and jointly registered to determine when an interface between coal and shale is being cut through.

Campbell, R. A.↗

NASA NTRS1977

Recertification of the air and methane storage vessels at the Langley 8-foot high-temperature structures tunnel

This center operates a number of sophisticated wind tunnels in order to fulfill the needs of its researchers. Compressed air, which is kept in steel storage vessels, is used to power many of these tunnels. Some of these vessels have been in use for many years, and Langley is currently recertifying these vessels to insure their continued structural integrity. One of the first facilities to be recertified under this program was the Langley 8-foot high-temperature structures tunnel. This recertification involved (1) modification, hydrotesting, and inspection of the vessels; (2) repair of all relevant defects; (3) comparison of the original design of the vessel with the current design criteria of Section 8, Division 2, of the 1974 ASME Boiler and Pressure Vessel Code; (4) fracture-mechanics, thermal, and wind-induced vibration analyses of the vessels; and (5) development of operating envelopes and a future inspection plan for the vessels. Following these modifications, analyses, and tests, the vessels were recertified for operation at full design pressure (41.4 MPa (6000 psi)) within the operating envelope developed.

Hudson, C. M.↗