Search NASA⌕ Search

Engineering topics

Hughes, Robin

Publications and source records attributed to Hughes, Robin.

TGA Study of the Reaction Kinetics of a CuFeMnAlO 4+δ Oxygen Carrier for Methane Chemical Looping Combustion under High Pressure and Atmospheric Pressure Conditions

Reduction and oxidation kinetics of a CuFeMnAlO 4+δ oxygen carrier for methane were studied using an atmospheric thermogravimetric analyzer (TGA) and a pressurized TGA. Important parameters such as temperature (500–900 °C), particle size distribution (150–650 μm), and partial pressures of reactants (methane and oxygen) were evaluated. Results showed that the reduction of the oxygen carrier was not affected by particle size distribution studied in this work, and that above 750 °C, the effect of the temperature on oxygen carrier reduction started to diminish. The reaction time approaches an asymptotic limit as methane partial pressure increases. For oxygen carrier oxidation, it was found that the rate of oxidation increased with increasing oxygen concentration. The effect of the oxygen concentration was more noticeable when the oxygen concentration was below 7.5%. Because of the inherent feature of the oxygen carrier, its chemical looping with oxygen uncoupling property was also assessed. A phase boundary-controlled shrinking sphere model was used to model the test data from the TGAs. Modeling results showed that the oxygen carrier reduction had a reaction order of 1 with an activation energy of ∼46 kJ/mol. Oxygen carrier oxidation demonstrated a reaction order of 1.1 with an activation energy of ∼55 kJ/mol. Additionally, the differences of the experimental results between the atmospheric pressure TGA and the pressurized TGA were discussed in detail and the limitations of the pressurized TGA were highlighted.

Hydrocarbons↗

Biomass Combustion in a Circulating Fluidized Bed Combustor

Interest in circulating fluidized bed (CFB) boilers as a power generation technology has skyrocketed in recent years because of several advantages this technology offers over conventional boilers, such as increased gas-solid mixing resulting in higher combustion efficiency and the ability to use lower quality fuels. CFB combustors are operated at lower temperatures than conventional thermal power generation combustors, thus reducing NO x emissions. SO 2 emissions are conveniently controlled through the addition of Ca-based sulphur sorbents within the combustor. This report summarizes the current modeling effort on a 50 kW th CFB combustor with a diameter of 10 cm and a height of 5 m; designed, built, and operated at CanmetENERGY in Ottawa, Canada employing the multiphase particle-in-cell (PIC) approach in the open-source Multiphase Flow with Interphase eXchanges (MFiX) Software Suite. The MFiX-PIC model parameters for the simulation are tuned against cold-flow experiments from CanmetENERGY using 9 kg of olivine sand as the inert bed material. It is shown that for the relatively coarse fluid meshes and large parcel sizes necessitated by the scale of the simulation, filter size dependent corrections to the drag law must be incorporated to ensure accuracy of the simulation results. The validated cold flow model is extended to simulate reacting flow with torrefied hardwood as the feedstock and to validate the combustion reaction scheme. The species concentrations at the riser outlet are compared against CanmetENERGY’s experiments and show satisfactory agreement. The simulations demonstrate the ability of MFiX-PIC to accurately capture the physics and chemistry of a circulating fluidized bed combustor at bench scales, which can be further extended to pilot- and industrial-scale systems.

20 FOSSIL-FUELED POWER PLANTS↗