Engineering topics

Hull, David

Publications and source records attributed to Hull, David.

4 records

NASA NTRS2010

Characterization and Oxidation Behavior of Rayon-Derived Carbon Fibers

Rayon-derived fibers are the central constituent of reinforced carbon/ carbon (RCC) composites. Optical, scanning electron, and transmission electron microscopy were used to characterize the as-fabricated fibers and the fibers after oxidation. Oxidation rates were measured with weight loss techniques in air and oxygen. The as-received fibers are approximately 10 micron in diameter and characterized by grooves or crenulations around the edges. Below 800 C, in the reaction-controlled region, preferential attack began in the crenulations and appeared to occur down fissures in the fibers.

Jacobson, Nathan↗

NASA NTRS2005

Boron Nitride Nanotubes for Engineering Applications

Boron nitride nanotubes (BNNT) are of significant interest to the scientific and technical communities for many of the same reasons that carbon nanotubes (CNT) have attracted wide attention. Both materials have potentially unique and important properties for structural and electronic applications. However of even more consequence than their similarities may be the complementary differences between carbon and boron nitride nanotubes While BNNT possess a very high modulus similar to CNT, they also possess superior chemical and thermal stability. Additionally, BNNT have more uniform electronic properties, with a uniform band gap of 5.5 eV while CNT vary from semi-conductive to highly conductive behavior. Boron nitride nanotubes have been synthesized both in the literature and at NASA Glenn Research Center, by a variety of methods such as chemical vapor deposition, arc discharge and reactive milling. Consistent large scale production of a reliable product has proven difficult. Progress in the reproducible synthesis of 1-2 gram sized batches of boron nitride nanotubes will be discussed as well as potential uses for this unique material.

Hurst, Janet↗

NASA NTRS2005

Synthesis of Boron Nitride Nanotubes for Engineering Applications

Boron Nitride nanotubes (BNNT) are of interest to the scientific and technical communities for many of the same reasons that carbon nanotubes (CNT) have attracted large amounts of attention. Both materials have potentially unique and significant properties which may have important structural and electronic applications in the future. However of even more interest than their similarities may be the differences between carbon and boron nanotubes. Whilt boron nitride nanotubes possess a very high modulus similaar to CNT, they are also more chemically and thermally inert. Additionally BNNT possess more uniform electronic properties, having a uniform band gap of approximately 5.5 eV while CNT vary from semi-conductin to conductor behavior. Boron Nitride nanotubes have been synthesized by a variety of methods such as chemical vapor deposition, arc discharge and reactive milling. Consistently producing a reliable product has proven difficult. Progress in synthesis of 1-2 gram sized batches of Boron Nitride nanotubes will be discussed as well as potential uses for this unique material.

Hurst, Janet↗

NASA NTRS1990

Effect of high temperature hydrogen exposure on the strength and microstructure of mullite

The corrosion of near stoichiometric mullite (3Al2O3-2SiO2) by pure dry hydrogen gas was studied at 1050 and 1250 C for times up to 500 hr. The hydrogen preferentially attacked the grain boundaries of the mullite where an aluminosilicate glass was present. Corrosion of the mullite grains was observed after 125 hr at 1250 C. The hydrogen reaction removed SiO2 from the glassy grain boundaries and the mullite grains resulting in a porous alumina rich surface. At 1250 C the strength increased after short exposure times (at least up to 125 hr) and decreased by 53 percent after 500 hr. At 1050 C, all exposure times (25 to 500 hr) decreased the strength. At 500 hr room temperature strength of mullite exposed to 1050 C was reduced by 22 percent. The strength reduction after short exposure times at 1050 C is attributed to crystallization of the grain boundary glass phase.

Herbell, Thomas P.↗