Control of the Tokamak q Profile via MPC to Facilitate Reproducibility of High-qmin Steady-State Scenarios at DIII-D
Abstract not provided
Engineering topics
Publications and source records attributed to Humphreys, D.
Abstract not provided
The electron cyclotron heating (ECH)-assisted startup was successful in the Korea Superconducting Tokamak Advanced Research (KSTAR) first plasma campaign completed in June, 2008. It was observed that the second harmonic EC wave of 0.35 MW was sufficient to achieve breakdown in the ECH pre-ionization phase, to allow burn through, and to sustain the plasma during the current ramp with a low loop voltage of 2.0 V. This corresponds to a toroidal electric field of 0.24 Vm{sup -1} at the innermost vacuum vessel wall (R = 1.3 m). Since there is no feedback control of the plasma radial position in the initial phase of the KSTAR first plasma campaign, wall contact caused the plasma current fall to zero soon after the ECH beam was turned off. Extending pulse duration of the ECH power to 190 ms allowed the plasma current to rise up to more than 100 kA with a ramp-up rate of 0.8 MA/s and the pulse duration of 210 ms. Later in the first plasma campaign, the plasma was sustained up to 865 ms with the help of additional heating of 350-ms long ECH beam and with the help of the plasma radial position feedback control. The plasma current in the pre-ionization phase was observed and it is considered to be pressure-driven Pfirsch-Schlueter current.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
ELM mitigation is of particular importance in ITER in order to prevent rapid erosion or melting of the divertor surface, with the consequent risk of water leaks, increased plasma impurity content and disruptivity. Exploitable "natural" small or no ELM regimes might yet be found which extrapolate to ITER but this cannot be depended upon. Resonant Magnetic Perturbation has been added to pellet pacing as a tool for ITER to mitigate ELMs. Both are required, since neither method is fully developed and much work remains to be done. In addition, in-vessel coils enable vertical stabilization and RWM control. For these reasons, in-vessel coils (IVCs) are being designed for ITER to provide control of Edge Localized Modes (ELMs) in addition to providing control of moderately unstable resistive wall modes (RWMs) and the vertical stability (VS) of the plasma.
Massive gas injection (MGI) experiments with H{sub 2}, D{sub 2}, He, Ne and Ar and 'mixed' (H{sub 2} + Ar and D{sub 2} + Ne) gases injected into 'ITER-similar' 1.3-MA H-mode plasmas are described. Gas species, injected quantity Q, delivery time, t{sub inj}, rate-of-rise and intrinsic and added impurities are found to affect the attributes and 'disruption mitigation' efficacies of the resulting fast plasma shutdowns. With sufficient Q and t{sub inj} < {approx}2 ms, all species provide fast (within {le} {approx}3 ms), more-or-less uniform radiative dissipation of the 0.7-MJ plasma thermal energy and fast but benign current decays with reduced vacuum vessel vertical force impulse. With pure and mixed low-Z gases, free-electron densities up to 2 x 10{sup 21} m{sup -3} are obtained. While these densities are high relative to normal tokamak densities, they are still an order of magnitude smaller than the densities required for unconditional mitigation of the runaway electron avalanche process. Key information relevant to the design of effective MGI systems for larger tokamaks and ITER has been obtained and the collective species and Q-variation data provides a rich basis for validation of emerging 2D + t MHD/transport/radiation models.
In simulating reference scenarios proposed for ITER operation, we also explore performance of the poloidal field (PF) and central solenoid (CS) coil systems using a controller to maintain plasma shape and vertical stability during the discharge evolution. We employ a combination of techniques to evaluate system constraints and stability using time-dependent transport simulations of ITER discharges. We have begun the process of benchmarking these simulations with experiments on the DIII-D tokamak. Simulations include startup on the outside limiter, X-point formation and current ramp up to full power, plasma burn conditions at 15MA and 17MA, and ramp down at the end of the pulse. We also simulate perturbative events such as H-to-L back transitions. Our results indicate the viability of proposed ITER operating modes.