Search NASA⌕ Search

Engineering topics

Hung, C. M.

Publications and source records attributed to Hung, C. M..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Numerical investigation of separated nozzle flows

A numerical study of axisymmetric overexpanded nozzle is presented. The flow structure of the startup and throttle-down processes are examined. During the impulsive startup process, observed flow features include the Mach disk, separation shock, Mach stem, vortex core, contact surface, slip stream, initial shock front, and shocklet. Also the movement of the Mach disk is not monotonical in the downstream direction. For a range of pressure ratios, hysteresis phenomenon occurs; different solutions were obtained depending on different processes. Three types of flow structures were observed. The location of separation point and the lower end turning point of hysteresis are closely predicted. A high peak of pressure is associated with the nozzle flow reattachment. The reversed vortical structure and affects engine performance.

Chen, C. L.↗
NASA NTRS1988

An explicit Runge-Kutta method for 3D turbulent incompressible flows

A computer code has been developed to solve for the steady-state solution of the 3D incompressible Reynolds-averaged Navier-Stokes equations. The approach is based on the cell-center, central-difference, finite-volume formulation and an explicit one-step, multistage Runge-Kutta time-stepping scheme. The Baldwin-Lomax turbulence model is used. Techniques to accelerate the rate of convergence to a steady-state solution include the preconditioned method, the local time stepping, and the implicit residual smoothing. Improvements in computational efficiency have been demonstrated in several areas. This numerical procedure has been used to simulate the turbulent horseshoe vortex flow around an airfoil/flat-plate juncture.

Sung, Chao-Ho↗
NASA NTRS1985

Computation of three-dimensional shock wave and boundary-layer interactions

Computations of the impingement of an oblique shock wave on a cylinder and a supersonic flow past a blunt fin mounted on a plate are used to study three dimensional shock wave and boundary layer interaction. In the impingement case, the problem of imposing a planar impinging shock as an outer boundary condition is discussed and the details of particle traces in windward and leeward symmetry planes and near the body surface are presented. In the blunt fin case, differences between two dimensional and three dimensional separation are discussed, and the existence of an unique high speed, low pressure region under the separated spiral vortex core is demonstrated. The accessibility of three dimensional separation is discussed.

Hung, C. M.↗
NASA NTRS1983

An experimental and numerical investigation of the impingement of an oblique shock wave on a body of revolution

Attention is given to the experimental study and numerical simulation of the impingement of oblique shock wave on a cylinder, in order both to document the complex three-dimensional shock wave and boundary layer interaction occurring in practical problems (such as stores carriage interference in a supersonic tactical aircraft) and to conduct a critical comparison of experimental measurements and numerical computations for such complex flows. A thin layer approximation of the Navier-Stokes equations was solved by means of a mixed explicit-implicit scheme. Experimental measurements reveal a highly complex flow field with two distinct adjacent separation zones, regions of high cross flow, and multiply reflected shocks and expansion fans.

Brosh, A.↗
NASA NTRS1983

A time-split finite-volume algorithm for three-dimensional flow-field simulation

A general finite-volume algorithm is developed for solving three-dimensional, time-dependent, compressible Navier-Stokes equations for high Reynolds number flows over an arbitrary geometry. This algorithm adapts MacCormack's (1982) explicit-implicit scheme to a time-split, three-dimensional finite-volume concept in a general coordinate system. It is shown that the thin-layer approximation in all three spatial directions significantly reduces the evaluation of viscous terms and allows the algorithm to solve more complicated geometries with all boundaries in two or all three directions. The calculated results using this method are found to be in good agreement with the experimental measurements of a blunt-fin induced shock wave and boundary-layer interaction problems. Observations of the existence of peak pressure, primary horseshoe and secondary vortices, and reversed supersonic zones show that computational fluid dynamics can effectively supplement the wind tunnel tests for aerodynamic design as well as for understanding basic fluid dynamics.

Hung, C. M.↗
NASA NTRS1982

Impingement of an oblique shock wave on a cylinder

This paper presents a numerical simulation of impingement of an oblique shock wave on a cylinder. The study was undertaken to understand the three-dimensional shock wave and boundary-layer interactions occurring on problems such as the impingement of the bow shock wave from the Shuttle nose on an external tank, and store-carriage interference on a supersonic tactical aircraft. A thin-layer approximation of the Navier-Stokes equations is solved by a mixed explicit-implicit scheme for a supersonic Mach 4 flow with an incident shock angle of 25 deg. Both laminar and turbulent flows are investigated. Surface pressures show large extents of upstream influence, except near windward plane. Based on plots of velocity at the first mesh points above the cylinder body, a conjectured limiting-streamline pattern is constructed. Three-dimensional separation is studied, and the role of crossflow is discussed.

Hung, C. M.↗
NASA NTRS1981

Computation of Supersonic Turbulent Flows over an Inclined Ogive-Cylinder-Flare

A supersonic turbulent flow over an ogive-cylinder-flare has been solved numerically. The calculations proceed in two parts. Initially, the parabolized Navier-Stokes equations are solved for the ogive cylinder back to a location upstream of the shock-wave and boundary-layer interaction. Then, the time-dependent Navier-Stokes equations with a thin-layer approximation are solved for the remaining cylinder-flare portion. Results for a Mach number of 2.0 and a unit Reynolds number of 11.42 x 10(exp 6)/m are obtained for angles of attack alpha = 0, 4, and 8 deg. Good agreement has been found between computed and experimental results of the surface pressure on the ogive-cylinder portion and for the interaction region at alpha = 0 and 4 deg. The role of circumferential communication in a three-dimensional shock-wave and boundary-layer interaction flowfield is discussed.

Hung, C. M.↗
NASA NTRS1980

Thin-layer approximation for three-dimensional supersonic corner flows

The thin-layer approximation is extended to an axial corner that is formed by the intersection of two perpendicular plates, one of which has an inclination angle with respect to the free stream. A computer code developed by Hung and MacCormack (1978) is modified for the thin-layer approximation, and a case with Mach 5.9 and a wedge angle of 6 deg is computed. In addition, it is shown that it is not necessary to solve the complete Navier-Stokes equations for a three-dimensional high-Reynolds-number corner flow.

Hung, C. M.↗
NASA NTRS1980

Numerical Solution of Supersonic Laminar Flow Over an Inclined Body of Revolution

A mixed explicit-implicit scheme is used to solve the time-dependent thin-layer approximation of the Navier-Stokes equations for a supersonic laminar flow over an inclined body of revolution. Test cases for Mach 2.8 flow over a cylinder with 15-deg flare angle at angles of attack of 0,1, and 4 deg are calculated. Good agreement is obtained between the present computed results and experimental measurements of surface pressure. A pair of vortices on the leeward and a peak in the normal force distribution near the flared juncture are predicted; the role of circumferential communication is discussed.

Hung, C. M.↗
NASA NTRS1980

Computation of supersonic turbulent flows over an inclined ogive-cylinder-flare

A supersonic turbulent flow over an ogive-cylinder-flare has been solved numerically. Initially, the parabolized Navier-Stokes equations are solved for the ogive cylinder back to a location upstream of the shock-wave and boundary-layer interaction. Then, the time-dependent Navier-Stokes equations with a thin-layer approximation are solved for the remaining cylinder-flare portion. Results for a Mach number of 2.9 and a unit Reynolds number of 11.42 x 10 to the 6th/m are obtained for angles of attack alpha = 0, 4, and 8 deg. Good agreement has been found between computed and experimental results of the surface pressure on the ogive-cylinder portion, and for the interaction region at alpha = 0 and 4 deg. The role of circumferential communication in a three-dimensional shock-wave and boundary-layer interaction flow field is discussed.

Hung, C. M.↗
NASA NTRS1979

Numerical solution of supersonic laminar flow over an inclined body of revolution

A mixed explicit-implicit scheme is used to solve the time-dependent thin-layer approximation of the Navier-Stokes equations for a supersonic laminar flow over an inclined body of revolution. Test cases for Mach 2.8 flow over a cylinder with 15 deg flare angle at angles of attack of 0, 1, and 4 deg are calculated. Good agreement is obtained between the present computed results and experimental measurements of surface pressure. A pair of vortices on the leeward and a peak in the normal force distribution near the flared juncture are predicted; the role of circumferential communication is discussed.

Hung, C. M.↗
NASA NTRS1979

Computation of three-dimensional turbulent separated flows at supersonic speeds

Numerical solutions of the time-averaged Navier-Stokes equations employing a simple eddy-viscosity model have been obtained for three dimensional turbulent flow fields at supersonic speeds. The computer results are compared with a series of experimental test flows describing the interaction of a swept shock wave with a turbulent boundary layer for various shock-wave strengths. Very good agreement is obtained between the computed and experimental surface and flow-field results. The computed flow fields are examined in detail to investigate the physics of this type of flow field. Questions concerning the existence of a vortex and the relationship between converging surface oil streaks and the resulting flow field are addressed.

Horstman, C. C.↗
NASA NTRS1978

Numerical solution of a three-dimensional shock wave and turbulent boundary-layer interaction

A rapid numerical scheme is used to solve the complete mass-averaged Navier-Stokes equations for supersonic turbulent flow over a three-dimensional compression corner. A simple eddy viscosity model is developed, and the interaction of a swept shock wave and a three-dimensional turbulent boundary layer is studied. Good agreement is obtained between the present results and experimental measurements for the case of a wedge with an angle of 6 deg on a flat-plate sidewall. For the case of a 12-deg wedge angle, the computed results do not show the existence of a peak pressure found experimentally. However, the range of interaction, the plateau pressure, and the peak heat transfer are closely predicted for all cases. The high heat transfer near the axial corner is due to the thinning of the boundary layer and inflow of fresh high-momentum fluid. The heat transfer is relieved through pressure reduction and boundary-layer thickening.

Hung, C. M.↗
NASA NTRS1977

Numerical solution of supersonic laminar flow over a three-dimensional compression corner

A newly developed, rapid numerical scheme is extended to three dimensions to solve the complete Navier-Stokes equations for a supersonic, laminar flow over a compression corner with sidewall effects. The program is coded so that it can solve for a general curved ramp surface geometry such as found in inlets and fuselage-wing-flap junctions. A test case of Mach 3.0 flow is calculated. In regions where three-dimensional effects are small, good agreement is obtained between the present calculation and previous two-dimensional solutions. In other regions, the results show complex three-dimensional flow-field interactions including shock-shock and shock/boundary-layer interactions

Hung, C. M.↗
NASA NTRS1977

Reynolds number effects on shock-wave turbulent boundary-layer interactions - A comparison of numerical and experimental results

An experiment is described that tests and guides computations of a shock-wave turbulent boundary-layer interaction flow over a 20-deg compression corner at Mach 2.85. Numerical solutions of the time-averaged Navier-Stokes equations for the entire flow field, employing various turbulence models, are compared with the data. Each model is critically evaluated by comparisons with the details of the experimental data. Experimental results for the extent of upstream pressure influence and separation location are compared with numerical predictions for a wide range of Reynolds numbers and shock-wave strengths.

Horstman, C. C.↗