Search NASA⌕ Search

Engineering topics

Hwang, Cheol Seong

Publications and source records attributed to Hwang, Cheol Seong.

Tunable stochastic memristors for energy-efficient encryption and computing

Information security and computing, two critical technological challenges for post-digital computation, pose opposing requirements – security (encryption) requires a source of unpredictability, while computing generally requires predictability. Each of these contrasting requirements presently necessitates distinct conventional Si-based hardware units with power-hungry overheads. This work demonstrates Cu 0.3 Te 0.7 /HfO 2 (‘CuTeHO’) ion-migration-driven memristors that satisfy the contrasting requirements. Under specific operating biases, CuTeHO memristors generate truly random and physically unclonable functions, while under other biases, they perform universal Boolean logic. Using these computing primitives, this work experimentally demonstrates a single system that performs cryptographic key generation, universal Boolean logic operations, and encryption/decryption. Circuit-based calculations reveal the energy and latency advantages of the CuTeHO memristors in these operations. This work illustrates the functional flexibility of memristors in implementing operations with varying component-level requirements.

97 MATHEMATICS AND COMPUTING↗

Low-temperature SiON films deposited by plasma-enhanced atomic layer deposition method using activated silicon precursor

It has not been an easy task to deposit SiN at low temperature by conventional plasma-enhanced atomic layer deposition (PE-ALD) since Si organic precursors generally have high activation energy for adsorption of the Si atoms on the Si-N networks. In this work, in order to achieve successful deposition of SiN film at low temperature, the plasma processing steps in the PE-ALD have been modified for easier activation of Si precursors. In this modification, the efficiency of chemisorption of Si precursor has been improved by additional plasma steps after purging of the Si precursor. As the result, the SiN films prepared by the modified PE-ALD processes demonstrated higher purity of Si and N atoms with unwanted impurities such as C and O having below 10 at. % and Si-rich films could be formed consequently. Also, a very high step coverage ratio of 97% was obtained. Furthermore, the process-optimized SiN film showed a permissible charge-trapping capability with a wide memory window of 3.1 V when a capacitor structure was fabricated and measured with an insertion of the SiN film as the charge-trap layer. The modified PE-ALD process using the activated Si precursor would be one of the most practical and promising solutions for SiN deposition with lower thermal budget and higher cost-effectiveness.

36 MATERIALS SCIENCE↗

Symmetry-dependent interfacial reconstruction to compensate polar discontinuity at perovskite oxide interfaces (LaAlO{sub 3}/SrTiO{sub 3} and LaAlO{sub 3}/CaTiO{sub 3})

We report the crystal symmetry-dependency of the interfacial reconstruction to relieve the polar discontinuity at the complex oxide heterointerfaces. We chose LaAlO{sub 3}/SrTiO{sub 3} and LaAlO{sub 3}/CaTiO{sub 3} interfaces as model systems, where the neutral TiO{sub 2} and the positive LaO{sup +} layers form the polar discontinuity at the interface with TiO{sub 2}-terminated (001) cubic SrTiO{sub 3} and orthorhombic CaTiO{sub 3}. Using scanning transmission electron microscopy, we observed that the interlayer distance abnormally increased at the interface. We performed the first-principles calculations to understand the detailed atomic displacement at the interfaces having no oxygen vacancy and intermixing. Our results show that cations were reconstructed in different ways depending on the crystal symmetry through the octahedral tilts and atomic displacements to compensate the polar discontinuity at the interfaces. Our results imply that the interfacial reconstructions have to be considered along with the ionic compensation (intermixing) and electronic compensation (two dimensional electron gas) to fully understand the interfacial phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resistance switching in epitaxial SrCoO{sub x} thin films

We observed bipolar switching behavior from an epitaxial strontium cobaltite film grown on a SrTiO{sub 3} (001) substrate. The crystal structure of strontium cobaltite has been known to undergo topotactic phase transformation between two distinct phases: insulating brownmillerite (SrCoO{sub 2.5}) and conducting perovskite (SrCoO{sub 3−δ}) depending on the oxygen content. The current–voltage characteristics of the strontium cobaltite film showed that it could have a reversible insulator-to-metal transition triggered by electrical bias voltage. We propose that the resistance switching in the SrCoO{sub x} thin film could be related to the topotactic phase transformation and the peculiar structure of SrCoO{sub 2.5}.

36 MATERIALS SCIENCE↗

Role of ZrO{sub 2} incorporation in the suppression of negative bias illumination-induced instability in Zn-Sn-O thin film transistors

Thin film transistors (TFTs) with In and Ga-free multicomponent Zn-Sn-Zr-O (ZTZO) channel layers were fabricated using the cosputtering approach. The incorporation of ZrO{sub 2} into the Zn-Sn-O (ZTO) films increased the contact resistance, which led to the degradation of the transport properties. In contrast, the threshold voltage shift under negative bias illumination stress (NBIS) was largely improved from -12.5 V (ZTO device) to -4.2 V (ZTZO device). This improvement was attributed to the reduction in the oxygen vacancy defects in the ZTZO film, suggesting that the photoinduced transition from V{sub O} to V{sub O}{sup 2+} was responsible for the NBIS-induced instability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of cesium assistance on the electrical and structural properties of indium tin oxide films grown by magnetron sputtering

Indium tin oxide (ITO) thin films were deposited by cesium (Cs)-assisted dc magnetron sputtering in an attempt to achieve a high performance at low temperatures. The films were deposited on SiO{sub 2}/Si wafer and glass (Eagle 2000) substrates at a substrate temperature of 100 degree sign C with a Cs vapor flow during the deposition process. The ITO thin films deposited in the presence of Cs vapor showed better crystallinity than the control films grown under normal Ar/O{sub 2} plasma conditions. The resistivity of the films with the Cs assistance was lower than that of the control films. The lowest resistivity of 6.2x10{sup -4} {Omega} cm, which is {approx}20% lower than that of the control sample, was obtained without any postdeposition thermal annealing. The surface roughness increased slightly when Cs vapor was added. The optical transmittance was >80% at wavelengths ranging from 380 to 700 nm.

36 MATERIALS SCIENCE↗

Change in the resistivity of Ge-doped Sb phase change thin films grown by chemical vapor deposition according to their microstructures

This study examined the effects of the composition and microstructure on the electric resistivity of Ge-doped Sb phase change thin films grown by cyclic plasma enhanced chemical vapor deposition. Ge and Sb layers were deposited sequentially to form either a Ge{sub x}Sb{sub y} mixture or Ge/Sb nanolaminated films. While the resistivity of the nanolaminated films was higher, the Ge{sub x}Sb{sub y} mixture showed a lower resistivity than the pure Sb film. This can be explained by the increase in carrier density of the alloy, as confirmed by first-principles calculations. An abrupt change in resistance accompanying a phase change was observed at {approx}210 deg. C.

36 MATERIALS SCIENCE↗