Search NASA⌕ Search

Engineering topics

Hybertsen, M

Publications and source records attributed to Hybertsen, M.

Linker Dependent Bond Rupture Force Measurements in Single-Molecule Junctions

We use a modified conducting atomic force microscope to simultaneously probe the conductance of a single-molecule junction and the force required to rupture the junction formed by alkanes terminated with four different chemical link groups which vary in binding strength and mechanism to the gold electrodes. Molecular junctions with amine, methylsulfide, and diphenylphosphine terminated molecules show clear conductance signatures and rupture at a force that is significantly smaller than the measured 1.4 nN force required to rupture the single-atomic gold contact. In contrast, measurements with a thiol terminated alkane which can bind covalently to the gold electrode show conductance and force features unlike those of the other molecules studied. Specifically, the strong Au-S bond can cause structural rearrangements in the electrodes, which are accompanied by substantial conductance changes. Despite the strong Au-S bond and the evidence for disruption of the Au structure, the experiments show that on average these junctions also rupture at a smaller force than that measured for pristine single-atom gold contacts.

36 MATERIALS SCIENCE↗

In situ Formation of Highly Conducting Covalent Au-C Contacts for Single-Molecule Junctions

Charge transport across metal-molecule interfaces has an important role in organic electronics. Typically, chemical link groups such as thiols or amines are used to bind organic molecules to metal electrodes in single-molecule circuits, with these groups controlling both the physical structure and the electronic coupling at the interface. Direct metal-carbon coupling has been shown through C60, benzene and {pi}-stacked benzene but ideally the carbon backbone of the molecule should be covalently bonded to the electrode without intervening link groups. Here, we demonstrate a method to create junctions with such contacts. Trimethyl tin (SnMe{sub 3})-terminated polymethylene chains are used to form single-molecule junctions with a break-junction technique. Gold atoms at the electrode displace the SnMe{sub 3} linkers, leading to the formation of direct Au-C bonded single-molecule junctions with a conductance that is {approx}100 times larger than analogous alkanes with most other terminations. The conductance of these Au-C bonded alkanes decreases exponentially with molecular length, with a decay constant of 0.97 per methylene, consistent with a non-resonant transport mechanism. Control experiments and ab initio calculations show that high conductances are achieved because a covalent Au-C sigma ({sigma}) bond is formed. This offers a new method for making reproducible and highly conducting metal-organic contacts.

36 MATERIALS SCIENCE↗

Mechanics and Chemistry: Sinle Molecule Bond Rupture Forces Correlate with Molecular Backbone Structure

We simultaneously measure conductance and force across nanoscale junctions. A new, two-dimensional histogram technique is introduced to statistically extract bond rupture forces from a large data set of individual junction elongation traces. For the case of Au point contacts, we find a rupture force of 1.4 {+-} 0.2 nN, which is in good agreement with previous measurements. We then study systematic trends for single gold metal-molecule-metal junctions for a series of molecules terminated with amine and pyridine linkers. For all molecules studied, single molecule junctions rupture at the Au-N bond. Selective binding of the linker group allows us to correlate the N-Au bond-rupture force to the molecular backbone. We find that the rupture force ranges from 0.8 nN for 4,4' bipyridine to 0.5 nN in 1,4 diaminobenzene. These experimental results are in excellent quantitative agreement with density functional theory based adiabatic molecular junction elongation and rupture calculations.

36 MATERIALS SCIENCE↗

The Electrical Properties of Biphenylenes

The effect of the partial antiaromaticity of biphenylene on its substitution chemistry, its oxidation potential, and its single-molecule conductance is explored. Biphenylene and fluorene molecules with linkers of two amino groups or two cyclic thioether groups were synthesized and their conduction properties were investigated using scanning tunneling microscopy (STM) break-junction techniques and DFT calculations. Despite the partial antiaromaticity of biphenylene, which causes the biphenylenes to be much more easily oxidizable, no significant increase in molecular conductance was found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reliable Formation of Single Molecule Junctions with Air-Stable Diphenylphosphine Linkers

We measure the conductance of single Au-molecule-Au junctions with a series of air-stable diphenylphosphine-terminated molecules using the scanning tunneling microscope-based break junction technique. Thousands of conductance versus displacement traces collected for each molecule are used to statistically analyze junction conductance and evolution upon elongation. Measured conductances for a series of alkane-based molecules exhibit an exponential decrease with increasing length, as expected for saturated molecules, with a tunneling decay constant of 0.98 {+-} 0.04. Measurements of junction elongation indicate strong metal-molecule binding, with a length that increases with the number of methylene groups in the backbone. Measured conductance histograms for four molecules with short, unsaturated backbones (e.g., benzene) are much broader with less well-defined peaks. These measurements are supported by density function theory calculations. The phosphine binds selectively to under-coordinated gold atoms through a donor-acceptor bond with a binding energy of about 1 eV. The calculated tunnel coupling correlates very well with experiment.

36 MATERIALS SCIENCE↗

Conductance and Geometry of Pyridine-Linked Single Molecule Junctions

We have measured the conductance and characterized molecule-electrode binding geometries of four pyridine-terminated molecules by elongating and then compressing gold point contacts in a solution of molecules. We have found that all pyridine-terminated molecules exhibit bistable conductance signatures, signifying that the nature of the pyridine-gold bond allows two distinct conductance states that are accessed as the gold-molecule-gold junction is elongated. We have identified the low-conductance state as corresponding to a molecule fully stretched out between the gold electrodes, where the distance between contacts correlates with the length of the molecule; the high-conductance state is due to a molecule bound at an angle. For all molecules, we have found that the distribution of junction elongations in the low-conductance state is the same, while in the high-conductance state, the most likely elongation length increases linearly with molecule length. The results of first-principles conductance calculations for the four molecules in the low-conductance geometry agree well with the experimental results and show that the dominant conducting channel in the conjugated pyridine-linked molecules is through the {pi}* orbital.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Frustrated Rotations in Single-Molecule Junctions

We compare the conductance of 1,4-bis(methylthio)benzene with that of 2,3,6,7-tetrahydrobenzo[1,2-b:4,5-b{prime}]dithiophene and the conductance of 1,4-bis(methylseleno)benzene with that of 2,3,6,7-tetrahydrobenzo[1,2-b:4,5-b{prime}]diselenophene and show explicitly that the orientation of an Au-S or Au-Se bond relative to the aromatic {pi} system controls electron transport through conjugated molecules. Specifically, we have found that the conduction pathway connects the Au electrodes to the aromatic {pi}-system via the chalcogen p lone pairs, and greater overlaps among these components lead to higher conductivity through the molecular junction.

43 PARTICLE ACCELERATORS↗

Electronic Structure of Few-Layer Epitaxial Graphene on Ru(0001)

The electronic structure of epitaxial monolayer, bilayer, and trilayer graphene on Ru(0001) was determined by selected-area angle-resolved photoelectron spectroscopy (micro-ARPES). Micro-ARPES band maps provide evidence for a strong electronic coupling between monolayer graphene and the adjacent metal, which causes the complete disruption of the graphene p-bands near the Fermi energy. However, the perturbation by the metal decreases rapidly with the addition of further graphene sheets, and already an epitaxial graphene bilayer on Ru recovers the characteristic Dirac cones of isolated monolayer graphene. A graphene trilayer on Ru behaves like free-standing bilayer graphene. Density-functional theory based calculations show that this decoupling is due to the efficient passivation of metal d-states by the interfacial graphene layer.

36 MATERIALS SCIENCE↗