Hyland, R. E. | Search NASA

NASA NTRS1973

Study of extraterrestrial disposal of radioactive wastes. Part 3: Preliminary feasibility screening study of space disposal of the actinide radioactive wastes with 1 percent and 0.1 percent fission product contamination

A preliminary study was conducted of the feasibility of space disposal of the actinide class of radioactive waste material. This waste was assumed to contain 1 and 0.1 percent residual fission products, since it may not be feasible to completely separate the actinides. The actinides are a small fraction of the total waste but they remain radioactive much longer than the other wastes and must be isolated from human encounter for tens of thousands of years. Results indicate that space disposal is promising but more study is required, particularly in the area of safety. The minimum cost of space transportation would increase the consumer electric utility bill by the order of 1 percent for earth escape and 3 percent for solar escape. The waste package in this phase of the study was designed for normal operating conditions only; the design of next phase of the study will include provisions for accident safety. The number of shuttle launches per year required to dispose of all U.S. generated actinide waste with 0.1 percent residual fission products varies between 3 and 15 in 1985 and between 25 and 110 by 2000. The lower values assume earth escape (solar orbit) and the higher values are for escape from the solar system.

Hyland, R. E.↗

NASA NTRS1972

Study of extraterrestrial disposal of radioactive wastes. Part 2: Preliminary feasibility screening study of extraterrestrial disposal of radioactive wastes in concentrations, matrix materials, and containers designed for storage on earth

The results are reported of a preliminary feasibility screening study for providing long-term solutions to the problems of handling and managing radioactive wastes by extraterrestrial transportation of the wastes. Matrix materials and containers are discussed along with payloads, costs, and destinations for candidate space vehicles. The conclusions reached are: (1) Matrix material such as spray melt can be used without exceeding temperature limits of the matrix. (2) The cost in mills per kw hr electric, of space disposal of fission products is 4, 5, and 28 mills per kw hr for earth escape, solar orbit, and solar escape, respectively. (3) A major factor effecting cost is the earth storage time. Based on a normal operating condition design for solar escape, a storage time of more than sixty years is required to make the space disposal charge less than 10% of the bus-bar electric cost. (4) Based on a 10 year earth storage without further processing, the number of shuttle launches required would exceed one per day.

Hyland, R. E.↗

NASA NTRS1972

Benchmark gas core critical experiment.

A critical experiment with spherical symmetry has been conducted on the gas core nuclear reactor concept. The nonspherical perturbations in the experiment were evaluated experimentally and produce corrections to the observed eigenvalue of approximately 1% delta k. The reactor consisted of a low density, central uranium hexafluoride gaseous core, surrounded by an annulus of void or low density hydrocarbon, which in turn was surrounded with a 97-cm-thick heavy water reflector.

Kunze, J. F.↗

NASA NTRS1971

Evaluation of critical mass for open-cycle gas- core rocket reactors

Critical mass calculation for open cycle gas core rocket reactors, considering cavity size, fuel radius, reflector thickness and hydrogen bypass flow

Hyland, R. E.↗

NASA NTRS1971

Mini gas-core propulsion concept.

A propulsion concept is presented that can achieve specific impulses of 1000 to 2000 seconds for thrust levels on the order of 100 pounds (445 N) and maintain a small (1.22 m) reactor diameter for a total power-plant weight of approximately 10,000 kg. The concept combines a small (0.61 m) diameter spherical gas core centrally located, followed by a moderator (BeO-15 cm), surrounded by a driver fuel region and contained in a pressure vessel (ID of 1.22 m). Best results (i.e., highest ratio of cavity power to total power) occur with U-233 isotope as the fuel in both the cavity and the driver, although U-235 can also be used. Concept may also have application in the testing of a gas-core reactor and MHD devices and in high temperature-pressure materials research.

Hyland, R. E.↗

NASA NTRS1971

A mini-cavity probe reactor

Propulsion and weight analyses of mini-cavity reactor rocket engine concept

Hyland, R. E.↗

NASA NTRS1971

Mini gas-core propulsion concept

A propulsion concept is presented that can achieve specific impulses of 1000 to 2000 seconds for thrust levels on the order of 100 pounds (445 N) and maintain a small (1.22 m) reactor diameter for a total power-plant weight of approximately 10,000 kg. The concept combines a small (0.61 m) diameter spherical gas core centrally located, followed by a moderator (BeO-15 cm), surrounded by a driver fuel region and contained in a pressure vessel (ID of 1.22 m). Best results (i.e., highest ratio of cavity power to total power) occur with U-233 isotope as the fuel in both the cavity and the driver, although U-235 can also be used. Concept may also have application in the testing of a gas-core reactor and MHD devices and in high temperature-pressure materials research.

Hyland, R. E.↗

NASA NTRS1971

A mini-cavity probe reactor.

The mini-cavity reactor is a rocket engine concept which combines the high specific impulse from a central gaseous fueled cavity (0.6 m diam) and NERVA type fuel elements in a driver region that is external to a moderator-reflector zone to produce a compact light weight reactor. The overall dimension including a pressure vessel that is located outside of the spherical reactor is approximately 1.21 m in diameter. Specific impulses up to 2000 sec are obtainable for 220 to 890 N of thrust with pressures less than 1000 atm. Powerplant weights including a radiator for disposing of the power in the driver region are between 4600 and 32,000 kg - less than payloads of the shuttle. This reactor could also be used as a test reactor for gas-core, MHD, breeding and materials research.

Hyland, R. E.↗

NASA NTRS1970