Search NASA⌕ Search

Engineering topics

Ichinose, Gene A.

Publications and source records attributed to Ichinose, Gene A..

The 2022 Hunga eruption exercises the nuclear explosion monitoring community

The 2022 Hunga eruption was a global event recorded by all three Comprehensive Test Ban Treaty Organization (CTBTO) International Monitoring System (IMS) geophysical waveform sensor technologies: seismic, infrasound, and hydroacoustic. Large volcanic eruptions are rare and additionally present an opportunity to test seismoacoustic detection, location, and identification methods for nuclear explosion monitoring.

58 GEOSCIENCES↗

Comparisons Between Array Derived Dynamic Strain Rate (ADDS) and Fiber‐Optic Distributed Acoustic Sensing (DAS) Strain Rate

Abstract Distributed acoustic sensing (DAS) strain rate and particle velocity can be compared through approximate scaling with medium velocity. We instead performed a direct comparison between array derived dynamic strain (ADDS) rate and DAS strain rate for six frequency bands. The PoroTomo project at Brady's Hot Springs, Nevada, deployed a 240‐geophone 3C array co‐located with fiber‐optic DAS system and 8.7 km of buried cable. We selected subsets of the geophone array to create four smaller arrays and computed ADDS. The horizontal components of the ADDS were rotated into the direction of the fiber‐optic cable and then compared with the observed DAS strain rates. From three example regional earthquakes of local magnitudes 2.9, 4.1, and 4.3, the ADDS are found to be coherent with DAS for frequencies ≤1 Hz. For frequencies >1‐Hz, this correlation decays quickly. Small differences between linear and areal dynamic strains at 1‐Hz suggest poor signal‐to‐noise or localized strain that is perturbed by shallow heterogeneities compare to the average strain propagating across the geophone array. The implication is that around 1‐Hz, straight fiber DAS is measuring axial strain along the fiber and can provide good approximations to translational particle motions. However, above 1‐Hz, DAS becomes more sensitive to shallow velocity gradients that can be beneficial for geophysical imaging yet becomes a limitation for traditional seismic analysis methods depending on absolute amplitude and phase from translational particle motions.

58 GEOSCIENCES↗

Analysis of the Source Physics Experiment Dry Alluvium Geology Ball Drop Sources

Two balls were dropped approximately 150 m down an open borehole as part of an investigation into the aftershocks from a 51 ton TNT-equivalent chemical explosion. The ball drop sources, a concrete-filled basketball and a bowling ball, were intended to mimic falling debris within an underground explosion borehole and cavity. Falling debris or sloughing of the borehole and cavity walls is thought to be one of the sources of explosion aftershocks. The signals from the ball drop sources were recorded by the same seismic network that monitored the aftershocks of the chemical explosion, so the ball drop recordings were used as templates to search through the continuous stream of aftershocks and detect correlated signals as a proportion of all aftershocks. The search resulted in only four similar event recordings out of the thousands of detected aftershocks. A synthetic test showed that the small, high-frequency ball drop templates were limited to producing highly correlated detections for events occurring in a small region around the impact location at 150 m depth. The high-frequency templates were necessary since the small ball drop signals were only above the noise at frequencies greater than 10 Hz. Unfortunately, the impact location is where the borehole was filled with sand in preparation for the subsequent chemical explosion in the test series, making it 150 m above the explosion created cavity centered at 300 m depth. This puts the ball drop templates 150 m away from the cavity, where many more events from falling debris would be expected. Further synthetic tests confirmed events emanating from the cavity 150 m below the impact site would have correlated with the lower frequency template and been detected had the template been usable below 10 Hz. Therefore, we conclude that the four detected events were most probably falling debris within the open borehole that impacted the floor at 150 m depth just as the ball drop sources had, and that this type of explosion aftershock mechanism comprises less than 1% of all explosion aftershocks.

58 GEOSCIENCES↗

Regional Moment Tensor Inversion Using Rotational Observations

There are benefits from the addition of rotational motions to translational displacements for moment tensor (MT) inversions. The rotational radiation pattern is orthogonal to the shear radiation pattern, thus incorporating rotations is equivalent to gaining another observation point on the focal sphere. We demonstrated this by simulating curl and displacement wavefields for a regional distance station. Thus, one 6-C station (3-Component translational + 3-Component rotational) gathers the same information on radiation pattern as two 3-C stations at 90° azimuth from one another along the focal plane axis, which is sometimes difficult to obtain when restricted to surface sensors. We added rotational Green's functions to a regional MT inversion scheme (long-period, time-domain, and linear inversion) by computing spatial gradients from f-κ reflectivity synthetics. For rotational data, we used Array Derived Rotations (ADR) from Piñon Flats Observatory Array and Golay array deployed during IRIS Community Wavefield Demonstration Experiment. The hope is to ultimately use compact and field deployable broadband rotational seismometers instead of ADRs. Rotational motions were predicted from well-constrained deviatoric MT solutions of nine earthquakes recorded by the arrays and other seismic networks. Additionally, we formed three station sparse datasets with (3-C and 6-C) and without rotational ground motions (3-C only) for eight earthquakes testing the benefits of including rotational waveforms in MT inversions when they are equally weighted with translational waveforms. Adding rotational motions improved the double-couple components and reduced compensated-linear-vector-dipole and isotropic components in full-MT solutions using sparse datasets with poor coverage.

58 GEOSCIENCES↗

Seismic Moment Tensor Screening on the Hypersphere: Application to an Earthquake Population

A population of earthquakes is considered in the moment tensor screening frame- work. First, the members of the population are tested using the spherical distance statistic discussed in Ford and Kraft. All members are screened out, which is to say the explosion hypothesis is rejected at high confidence.Then, to gain insight to non-explosion populations, we estimate the distribution parameters for the earthquake population. Descriptive parameters of the population suggest it is ill-suited for description by a unimodal distribution on the hypersphere such as the von Mises Fisher distribution that described the explosion population. Nevertheless, we define an earthquake screening statistic based on the best-fit distribution parameters. No explosions are screened out, which is to say the earthquake hypothesis is not rejected for these events resulting in a poor screening performance.

58 GEOSCIENCES↗

Source Physics Experiment Data Quality Using Background Noise

We computed time-domain root-mean-square (TRMS) amplitudes and power spectral densities (PSD) from the Source Physics Experiment (SPE) seismic data using the 2018 version 1.4 of the instrument response metadata. The geophone instrument gains were set lower about a few weeks prior to the SPE shots to record on-scale and then reset soon afterward to record background noise and seismicity. When the gains were set lower, we determined that the 1-2 Hz bandpass filtered geophone amplitudes increased 20 decibels (dB) or factor of 10 relative to the geophone baseline or background noise levels from nearby broadband sensors. This indicates an inconsistency between the released metadata reporting a decrease in gain factor of 32 and the likely true geophone gain setting of 3.2. After the shots, the geophone gains were reset and recorded background noise levels similar to nearby broadbands consistent with the metadata for those time intervals. There was also a similar issue with line-3, line-4 and AF Trillium broadband horizontals gains during SPE-5 where there is a factor of 32 difference relative to baseline levels. The other Guralp and Trillium broadbands performed very well recording a 1-2 Hz noise level of -150 to -160 dB similar to the nearby station at Tonopah Springs, Nevada (US.TPNV) and compared with -170 dB from the new low noise model (NLNM) for the continental US (e.g., McNamara and Buland, 2004). The geophones were only 5-10 dB higher but performed as well as broadbands above 6 Hz. The accelerometers have poor low frequency response and were 40-50 dB higher in the 1-2 Hz band relative to broadbands.

58 GEOSCIENCES↗

Analysis of Three-Component Rotational and Translational Ground Motions from Source Physics Experiment Chemical Explosions and Local Earthquakes

Igel et al. (2005) demonstrated that using single point measurements of translational displacement and rotational strain can reconstruct the long-period teleseismic wavefield including wave-type, apparent velocity and propagation direction. We examine if this also holds true for higher frequencies at local distances. Four co-located three-component (3C) Eentec R-1 rotational velocity sensors and Kinemetric 3C accelerometers were deployed at the Nevada National Security Site (NNSS) to record 3 Source Physics Experiment (SPE) chemical explosions with yields of 90kg (SPE-1), 997kg (SPE-2), and 905kg (SPE-3) equivalent TNT. The four sensors were deployed 1-km from the source on granite, sedimentary, and alluvium outcrops. Three small earthquakes were also recorded, a Ml 3.3 at 28 km, a Ml 2.6 at 58 km, and Ml 3.5 at 123 km distance from SPE site. From the 3C rotational and translational motions, we measured the horizontal phase velocity of 450 m/s and 1125 m/s along two separate directions from the source consistent with near-surface geology. In contrast, the horizontal phase velocity measured for the Ml 3.3 earthquake is 5.4 km/s in the 0.1 to 10 Hz band with a propagation direction consistent with the epicenter location. While the earthquake exhibited very high coherency between 3C rotational and translational motions, the explosions exhibited more coherency with P-SV waves but less for SH-waves. This may be due to explosion SH waves originating from motions along joints or scattering near the source. This difference could be exploited as a discriminant between explosions and earthquakes.

58 GEOSCIENCES↗

Moment Tensor Source-Type Analysis for the Democratic People's Republic of Korea-Declared Nuclear Explosions (2006-2017) and 3 September 2017 Collapse Event

The Democratic People's Republic of Korea (DPRK) conducted its sixth announced nuclear test on 3 September 2017 03:30 UTC (mb 6.1). There was an aftershock 8.5 min later (mb 4.1). Such aftershocks were noteworthy and often associated with post–nuclear explosion collapses. We performed moment tensor (MT) and network sensitivity solution (NSS) analysis using regional long-period surface-wave and first-motion (FM) polarities. We also extended this analysis to the previous five DPRK nuclear tests. The NSS results, which include MT solution uncertainties, show large isotropic components for the events and are within the population of other U.S. nuclear and collapse events on the fundamental lune. The FM data improved the NNS source-type resolution. The agreement between MT seismic moments and independent coda-envelope amplitudes indicated no biases with the Earth model error or poorly constrained seismic moment for shallow seismic sources. The MT for the collapse is not a pure implosion and consistent with an equivalent tensional closing crack mechanism and two-sided vertical point force.

58 GEOSCIENCES↗