Engineering topics

Indebetouw, Guy

Publications and source records attributed to Indebetouw, Guy.

5 records

NASA NTRS1992

Optical distributed sensors for feedback control: Characterization of photorefractive resonator

The aim of the project was to explore, define, and assess the possibilities of optical distributed sensing for feedback control. This type of sensor, which may have some impacts in the dynamic control of deformable structures and the monitoring of small displacements, can be divided into data acquisition, data processing, and control design. Analogue optical techniques, because they are noninvasive and afford massive parallelism may play a significant role in the acquisition and the preprocessing of the data for such a sensor. Assessing these possibilities was the aim of the first stage of this project. The scope of the proposed research was limited to: (1) the characterization of photorefractive resonators and the assessment of their possible use as a distributed optical processing element; and (2) the design of a control system utilizing signals from distributed sensors. The results include a numerical and experimental study of the resonator below threshold, an experimental study of the effect of the resonator's transverse confinement on its dynamics above threshold, a numerical study of the resonator above threshold using a modal expansion approach, and the experimental test of this model. A detailed account of each investigation, including methodology and analysis of the results are also included along with reprints of published and submitted papers.

Indebetouw, Guy↗

NASA NTRS1992

Periodic and chaotic spatiotemporal states in a phase-conjugate resonator using a photorefractive BaTiO3 phase-conjugate mirror

The dynamics of an externally pumped phase-conjugate resonator that uses four-wave mixing in BaTi03 is investigated experimentally. The emergence of spatiotemporal instabilities as the degree of transverse confinement is varied by changing the Fresnel number is described in detail. Local intensity time series show that relaxing the transverse confinement leads the system from a stationary state to periodic, then to quasi-periodic, motions and finally to chaotic behavior. In some regions of parameter space two frequencies are identified in the power spectra of the time series, indicating a route to chaos following the Ruelle-Takens-Newhouse scheme. Wave-front topological defects are identified by interferometry. As the system's confinement is varied, the phase-defect density and the spatial correlation index are found to follow similar trends, indicating that the observed spatiotemporal dynamics may indeed be an example of defect-mediated turbulence.

Liu, Siuying R.↗

NASA NTRS1992

Defect-mediated spatial complexity and chaos in a phase-conjugate resonator

We have studied the spatiotemporal dynamics of a phase-conjugate resonator. The cavity Fresnel number is used to vary the degree of transverse confinement of the system. The generation and subsequent motion of the phase defects in the wave front are seen to mediate the system's dynamics. The number of defects and the complexity of their motion increases as the confinement is relaxed, leading the system through a sequence of bifurcations and eventually to chaos.

Indebetouw, Guy↗

NASA NTRS1992

Spatiotemporal dynamics and optical vortices in a photorefractive phase-conjugate resonator

A truncated modal expansion approach is used to study the spatiotemporal dynamics of a phase-conjugate resonator as a function of Bragg detuning. The numerical results reveal a rich variety of behaviors. Emphasis is given to the spatial distribution of optical vortices, their trajectories and their relationship to the beam's spatial coherence. The limitations of the model are discussed and experimental results are presented for comparison with the model's predictions and assessment of its soundness.

Liu, Siuying Raymond↗

NASA NTRS1990

Holographic matched filter for full-field in-line signal processing of optical-fiber sensor outputs

A holographic matched filter is used to measure the changes in the output of a dual-mode fiber undergoing axial strain. The hologram is formed by interfering collimated light from a single-mode reference fiber and an unstrained dual-mode sensor fiber on a small piece of holographic material. When the hologram is illuminated by the strained sensor fiber, the cross-correlation field comparing the dual-mode output and its previous state, as recorded in the hologram, is collected, focused into a pick-up fiber, and sent to a photodiode. This arrangement allows for a compact, in-line method for full-field processing of the strain-induced changes in phase and amplitude in the sensor fiber. Other uses of such fiber-based correlators are suggested.

Indebetouw, Guy↗