Indrek Wichman | Search NASA

NASA NTRS2021

Topical: Solid Fuel Combustion in Partial and Micro-Gravity

The risk of fire remains an ever-present danger in spaceflight. Most fire safety hazards originate in or eventually involve solid fuels, whether they be cellulosic (e.g., cotton fabric), hydrocarbons (e.g., plastics) or high-energy density electrode materials (e.g., batteries). A key approach to ensuring safety has been to focus on reducing the potential flammability of these materials – achieved by limiting their ignitability, potential for flame spread, and ultimate heat-release potential if ignited [1-3]. This approach has been relatively effective despite several close calls [4]. The limits of our understanding, however, are continually being challenged as future spaceflight missions incorporate partial gravity, enhanced oxygen, new types and classes of materials (e.g., composites), and higher energy-density batteries. This presents both an exciting scientific opportunity to enhance our understanding of solid fuel combustion processes while also posing a dire threat to future long-duration missions to the Moon and Mars.

Michael Gollner↗

NASA NTRS2021

Burning and Suppression of Solids–II (BASS-II) Summary Report

The Burning and Suppression of Solids (BASS) experiment hardware is a small flow duct that provides containment for small scale burning of solid samples within the Microgravity Science Glovebox (MSG) aboard the International Space Station (ISS). A video camera with a data overlay and a 35-mm still camera record the combustion events. The controls (ignition, fan speed, etc.) are operated by an astronaut while the principal investigator team monitors the experiment from the ground and communicates directly with the astronaut. For the first time on ISS, BASS–II utilized MSG working volume dilution with gaseous N2. We developed a perfectly stirred reactor model to determine the N2 flow time and flow rate to obtain the desired reduced O2 concentration in the working volume for each test. We calibrated the model with the Compound Specific Analyzer-Combustion Products (CSA-CP) O2 readings offset using the Major Constituents Analyzer reading of the ISS ambient atmosphere data for that day. This worked out extremely well for operations, and added a new vital variable, ambient O2 level, to our test matrices. The main variables tested in BASS–II were ambient O2 concentration, ventilation flow velocity, and fuel type, thickness, and geometry. BASS–II also utilized the onboard CSA-CP for O2 and CO readings, and the Carbon Dioxide Monitor for CO2 readings before and after each test. Readings from these sensors allow us to evaluate the completeness of the combustion. The O2 and CO2 readings before and after each test were analyzed and compared very well to stoichiometric ratios for a one-step gas-phase reaction. The CO versus CO2 followed a linear trend for some datasets, but not for all the different geometries of fuel and flow tested. We calculated the heat release rates during each test from the O2 consumption and burn times, using the constant 13.1 kJ of heat released per gram of O2 consumed. The results showed that most of the tests had heat release rates well below 100 W. Lastly, the global equivalence ratio for the tests is estimated to be fuel rich, 1.3 on average using mass loss and O2 consumption data.

Microgravity↗